Ball bearing unit
cast iron

ball bearing unit
ball bearing unit
Add to favorites
Compare this product


Rolling element
ball bearing
cast iron

Min.: 89 mm (3.5 in)

Max.: 184 mm (7.24 in)

Outside diameter

Min.: 27.5 mm (1.08 in)

Max.: 70 mm (2.76 in)

Inside diameter

Min.: 19.05 mm (0.75 in)

Max.: 80 mm (3.15 in)


Take-up ball bearing units SKF take-up ball bearing units consist of an insert bearing and a housing, and are compliant with ISO standards, North American standards, and Japanese Industrial Standards (JIS), as required by many industrial applications. In contrast, take-up units for the SKF Food Line are not compliant with these standards and are therefore considered as not standardized. The SKF take-up ball bearing unit assortment comprises insert bearing series and designs, with the main differences between the take-up units being the housing design, the locking method onto the shaft, the sealing solution, and the options for end covers and back seals. Explore the variety of take-up units and possible combinations available in the product details below. Take-up units are typically mounted in take-up frames and are connected by an adjustment screw. Housings AYT_HD_TU-50-TF_Rendering-DD_Beauty-shot.png Cast iron material is suitable for most applications. Grease fitting for relubrication is included – enabling maximized service life under severe operating conditions. Housings can be ordered as separate products for combination with any SKF insert ball bearing (data table). Housings are painted with a blue (RAL 5007) water-based alkyd/acryl paint that: protects the housing in accordance with ISO 12944-2, corrosivity category C2, i.e. exterior atmospheres with low levels of pollution, or interior atmospheres where condensation may occur


*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.