process sterilizer / superheated water / superheated steam / for the pharmaceutical industry
ASW Series

Add to MyDirectIndustry favorites
Compare this product Don’t compare this product
process sterilizer process sterilizer - ASW Series
{{requestButtons}}

Characteristics

  • Laboratory/process:

    process

  • Sterilization method:

    superheated water, superheated steam

  • Applications:

    for the pharmaceutical industry

  • Capacity:

    Max.: 25,000 l (6,604.3 gal)

    Min.: 830 l (219.3 gal)

Description

The sterilization program using superheated water is used mainly for sterilizing large containers, although it can also be used for other types of loads.

The product is treated in counterpressure, in order to avoid deforming or breaking the container. The ASW Series offers a rapid, safe and effective terminal sterilization process for high product throughput.

Water is continuously circulated through the system and cascades over the load using spray nozzles, high capacity pump and large diameter piping to ensure high water flow rates.

Compressed air at overpressure is injected to compensate for the rising temperature and pressure that builds inside the products when heated. The cooling phase brings the product down to ambient temperature by continuously spraying the recirculating water over the load. To assist heat penetration, the load can be rotated during the complete cycle.

Chamber volume
from 830 litres / 29 cu.ft
to 25.000 litres / 883 cu.ft

The machine body and jacket are completely made of AISI 316L stainless-steel.
AISI 316L stainless steel piping is connected with ASME tri-clamp connections.
The machine body is insulated with ceramic material and with an external cladding of stainless steel.
This system ensures the seal of the door in any condition of operation.
Energy saving with recirculation water cooling system
Flexible RTDs.
Equipment is provided with a grounding lug for proper static grounding and seismic compliance if required.
The front loading side the machine is provided with the connection ports required for the validation tests.