Crosscut sawing machine KP 500 AUTOMAT

circularwoodprecision

The KP 500 Automatic crosscut saw is a suitable solution for material preparation in the production of pallets and other wooden packaging products. On average, this saw can process 15–18 m³ of pallet lumber or approximately 13,000 pieces of pallet blocks per shift (8 hours), depending on the cross-sectional dimensions of the processed material. The saw can be operated by one or two workers, depending on the nature of the processed material, which is manually loaded into the machine. Basic Cutting Modes Manual Mode You can set each cut length by moving the material using the buttons on the panel or by adjusting the length value on the control panel's dial. Initiate the cut pressing the button on control board. This mode is suitable for individual sequential cuts. Automatic Mode a) Set a single cut dimension for the entire length of the input material. Upon initiating the cut with the pedal, the entire material will be automatically cut to this set value. After completing the cut, the feeder will return to the preset length value of the input material. This mode is suitable for the production of pallet blocks, allowing for a quick transition between different values during frequent changes in input material. b) Set a desired combination of cut dimensions for the entire length of the input material. Initiating the cut with the pedal will result in the automatic cutting of the entire material into these combinations of lengths. After completing the cut, the feeder will return to the preset length value of the input material.