Vibrating level switch Vibranivo® series
vibrating rodfor bulk materialsfor silicic acid

vibrating level switch
vibrating level switch
vibrating level switch
vibrating level switch
vibrating level switch
vibrating level switch
vibrating level switch
vibrating level switch
vibrating level switch
vibrating level switch
vibrating level switch
Add to favorites
Compare this product
 

Characteristics

Technology
vibrating, vibrating rod
Medium
for silicic acid, for bulk materials, for powders, for siliceous sand
Applications
for silos, for hazardous locations, for the pharmaceutical industry, for hygienic applications, for sediment level detection
Approvals
FM/CSA, IEC-Ex, FDA
Material
stainless steel, plastic, aluminum
Mounting
side-mount, horizontal
Other characteristics
maintenance-free, IP66
Process temperature

Min.: -40 °C (-40 °F)

Max.: 150 °C (302 °F)

Process pressure

Min.: -1 bar (-14.5 psi)

Max.: 16 bar (232.06 psi)

Description

Point level detection with Vibration Level Limit Switches Depending on the requirements, vibrating level limit switches are used as full, demand or empty detectors in storage silos or process vessels and are suitable for use in almost all media. The main component of the vibrating level limit switch is a piezo stack which is electrically excited and thereby vibrates. The design of this piezo stack largely defines the range of application. UWT vibrating level limit switches are suitable for process temperatures up to 150°C and process pressures up to 16 bar. Vibrating level limit switches are differed between vibration fork and vibrating rod, which differ in their mechanical design but not in their operating principle. Vibration fork level switches consist of two tines vibrating at their mechanical resonance frequency. Vibrating fork long = higher sensitivity = lower resonant frequency = lower self-cleaning effect. These vibrating forks are particularly suitable for very light and few adhering materials. For this purpose UWT offers the Vibranivo Series 2000 and 6000, which can even detect materials with a bulk density < 5 g/l. Vibrating fork short = lower sensitivity = higher resonance frequency = stronger self-cleaning effect These vibrating forks are particularly suitable for strongly adhering materials as well as for the detection of solids in liquids. For this purpose, UWT offers the Vibranivo series 1000 and 5000, which detect materials with a bulk density of 50 g/l and more. And are also suitable for interface measurement.

Other UWT GmbH Level Control products

Point Level Measurement

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.