Chemical product tube Venabio® Weld
thermoplasticelastomerfor the pharmaceutical industry

chemical product tube
chemical product tube
Add to favorites
Compare this product
 

Characteristics

Use
for chemical products
Material
thermoplastic, elastomer
Applications
for the pharmaceutical industry
Inner diameter

Min.: 1.6 mm (0.063 in)

Max.: 12.7 mm (0.5 in)

Outer diameter

Min.: 4.8 mm (0.189 in)

Max.: 19.1 mm (0.752 in)

Temperature

Min.: -45 °C (-49 °F)

Max.: 135 °C (275 °F)

Description

Vena® Bio Weld Thermoplastic elastomer APPLICATIONS This product satisfies the need for a heat sealable and weldable biopharmaceutical tubing. It provides disconnection and re-connection capabilities through a cuttable seal and aseptic welding. It is important to mention that a thermoplastic is heat sensitive, so dry heat, SIP and autoclave sterilization cycles will shorten its life considerably, therefore it should only be used when the application is single use. CUSTOMIZATION Hardness 52 Shore A Tensile strength 3,8 MPa Elongation 420% Density 0,89 g/cm³ Outer Layer Thermoplastic elastomer temperature Temperature -45˚C / +135˚C (-49˚F / +275˚F) Manufacturing Length Available in 25ft and 50ft Laser Etched Traceable with reference, lot number and ID/OD Clean Room Manufactured in ISO14644-1 Class 7 Double Bag Double bagged under vacuum Welding Heat sealable and weldable biopharmaceutical tubing Animal Free Animal derived component free Radiostable Gamma/eBeam sterilization available

Catalogs

No catalogs are available for this product.

See all of Venair‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.