Pumping station

Oil pumping station with control unit It is designed to move the movable pair of the clamps and to create the required pressing force during the welding process phases. It consists of pressure measurement and control equipment, three position flow distribution baffle, mounting plate and supply device. Features: metal enclosure and protection frame; minimum number of connections to minimize the system pressure drop and simplifies block mounting; it is equipped with three-phase motor with softstarter, thermal protection and power supply converter from 220 V into 380V; equipped with hydraulic accumulator providing constant pressure at all welding phases; isolated electrical unit allows reducing number of portable machine units; free access to the electrical and hydraulic parts is very convenient for service and diagnostics; information welding chart on the front panel; possibility of carrying out welding in semi-automatic or manual mode; Oil pumping station with logging device It is designed to move the movable pair of the clamps and to create the required pressing force during the welding process phases. It consists of (pressure, temperature and time) measurement and control equipment, three position flow distribution baffle, mounting plate and supply device. Features: Automatic calculation of welding process modes which requires parameter entering: -Material -Diameter -SDR Adjustment of welding modes depending on the ambient temperature; Automatic pressure priming in case of critical drop; Maintaining the set temperature; Saving 10 profiles with information of the welder, the company and the job site; Possibility of welding in manual mode "Welding without logging";