Seals, resurfaces and transforms worn and drab asphalt
No primer required
Flexible, waterproofing finish
Excellent UV and weathering resistance
Watco Asphalt & Concrete Resurfacer seals and resurfaces damaged and worn asphalt. It forms a flexible, sealed, waterproof surface that transforms old asphalt and tarmac.
Features
Easy 12" Paint Roller or paint brush application
Matt, slip resistant surface
No primer required
Flexible system to cope with natural movements in the asphalt
Excellent adhesion and covering power
Excellent resistance to UV and weathering
Can be applied at 1mm to 2mm in one layer, several layers, can be applied to cover badly worn patches
Suitable for pedestrian and light-medium traffic (cars, not HGV’s or forklifts)
Application
Preparation
Watco Asphalt & Concrete Resurfacer is flexible to allow for some movement in asphalt surfaces. Ensure surfaces are clean and free of loose material by brushing with a stiff broom and clean water. Allow to become dry, or almost dry, before applying the Asphalt & Concrete Resurfacer. If the surface has been previously painted, remove as much paint as possible by mechanical means. Any remaining paint should be well bonded and lightly abraded to provide a key.
Watco Bio-D, a bio-degradable water based degreasant can be used for grease removal from concrete and asphalt. Watco Asphalt & Concrete Resurfacer can be applied to a damp, but not wet, substrate. Damp down porous surfaces (but do not leave standing water) before application.