A polyaspartic resin primer for use at low temperatures
Use inside or out with Concrex Epoxy Floor Repair Mortar
Suitable for chiller room floors
Primer is ready for repair mortar in less than an hour
Watco Tack Coat is an epoxy resin adhesive primer for use before screeding with Watco Concrex® or before using Watco Concrex® Vertical. Watco Tack Coat Sub Zero is available for repairs during cold conditions.
Recommended areas of use
Suitable for internal or external applications
Can be applied over existing paint, but all poorly bonded paint must be removed and well bonded paint roughened to provide a key
Features
Quick and easy to mix and apply
Watco Concrex® can be applied within 30 - 60 minutes
Watco Tack Coat Sub Zero cures in temperatures as low as -20°C
Application
Surface preparation
Concrete Ensure surface is clean and free of all loose material. Watco Tack Coat may be applied over existing paint but all poorly bonded paint must be removed and well bonded paint roughened to provide a key. Check that there is no ice in the substrate.
Metal Remove any loose or flaking material and rust by wire brushing or disc grinding. Oil or grease should be removed with Watco Bio D and the metal allowed to dry. Watco Tack Coat should be applied immediately after cleaning and drying.