For resistance to aggressive chemicals in heavy traffic areas
Suitable for walls and floors
Takes heavy traffic
Watco Chemi-Coat® is a one coat high build epoxy resin coating which offers excellent durability and chemical resistance. Provides a superb glossy, hygienic and easily cleaned surface. A single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy Primer.
Features
Excellent resistance to many chemicals
Suitable for a variety of floor and wall surfaces
Low solvent content
Approved for use on sand and cement screed or concrete with under floor heating systems (up to 30°C surface temperature)
Coverage approx. 18m² per 4L pack maximum allowing for one coat by roller. Brush application may result in reduced coverage
One coat normally sufficient
Application
Surface preparation
Concrete and Brick - concrete to be treated must be dry, at least four weeks old and free of any soft surface laitance, contaminants, and not subject to rising damp. All loose material should be removed. Very smooth bare concrete or concrete with soft surface laitance should be etched with Watco Etch & Clean and the area thoroughly hosed off and allowed to dry. Grease or oil should be removed with Watco Bio D (or a similar degreasant) and the area thoroughly hosed off and allowed to dry. Very smooth previously painted surfaces should preferably be abraded to improve adhesion.