Anti-slip paint grip®

two-componentepoxyfor wood

A two part epoxy with pre-blended aggregate for an even, easy clean, fine anti slip finish Our strongest water based epoxy coating Pre-blended aggregate for an even finish Fast curing – apply two coats in one day Easy clean, finely textured 190 RAL colours to choose from Application Surface preparation Can be applied to bare or previously painted surfaces providing the paint is well bonded. Bare Concrete – remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean. Watco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Remove Etch & Clean by thoroughly rinsing with clean water and allow surface to dry. If residual damp remains this is acceptable since Safety Coat is breathable. Powerfloated or very smooth surfaces – Watco Powerfloat Primer should be used on very smooth or power floated surfaces. New Concrete – new concrete should be left for four weeks to dry in the summer and six in the winter. The surface should then be prepared using Watco Etch & Clean and thoroughly rinsed away and left to dry prior to applying this coating. Painted surfaces – abrade to remove loose paint. Check remaining paint is well bonded. Very smooth, glossy paint should be lightly abraded to provide a key. Watco Bio D can be used to remove grease and oil from painted surfaces. Watco Concroff is a very powerful degreaser for contaminated bare concrete (Concroff can soften paint). Highly porous surfaces – a primer may be required for high suction surfaces such as sand and cement screed. Please contact us for advice.