- Power Transmission - Mechanical components >
- Actuator and Positioning System >
- Aluminum positioning stage >
- Aerotech
Aerotech aluminum positioning stages
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Stroke : 0 mm - 200 mm
Load: 1, 2, 5 kg
Manual positioning table drived by metric fine thread screw. Actuated by grip knob. Guided by 2 rods on bronze bearings. Robust and economical table. Interchangeable with the 309B range. Options ...
Stroke : 0 mm - 200 mm
Load: 1, 2, 5 kg
Economical manual positioning table drived by leadscrew. Actuated by grip knob. Guided by 2 rods on bronze bearings. Options : Positioning indicator Position clamping Base plate ...
Stroke : 50 mm - 3,500 mm
Speed: 4,000 mm/s
Repeatability: 0.05 mm
... the customer's requirements, our technical team designed the following structure. Belt Driven Actuator Multi-axis Positioning Stage Linear Motion Gantry Robot
FUYU Technology
Stroke : 50 mm - 1,500 mm
Speed: 350 mm/s - 500 mm/s
... module, fully enclosed structure, body width 120mm, two guides and four sliders, with high precision, multi-segment repeat positioning, compact structure, strong versatility, suitable for use in special environments. Range ...
FUYU Technology
Stroke : 100 mm - 3,500 mm
Speed: 2,000 mm/s
Main Feature The body of the FPB60 dual-axis synchronous belt module is a precision extruded aluminum profile, and the overall design is lightweight. There are T-shaped nut runners on both sides of the body and the mounting ...
FUYU Technology
Stroke : 1 mm - 40 mm
Speed: 1 mm/s - 200 mm/s
Repeatability: 0.3 µm - 5 µm
LA92 High Speed UHV Linear Axis Application: High resolution and fast scanning applications Benefit: Fast positioning in UHV, also vertically Features: Outstanding resolution, very slim, with internal motor • ...
Steinmeyer Holding GmbH
Stroke : 1 mm - 100 mm
Speed: 1 mm/s - 10 mm/s
Repeatability: 0.4 µm - 5 µm
LT300 Precise high load linear stage Application: Transport Stage, scanning stage for high loads Benefit: High life time despite dry lube Features: lead screw with dry lube or ...
Steinmeyer Holding GmbH
Stroke : 1 mm - 300 mm
Speed: 1 mm/s - 10 mm/s
Repeatability: 0.015 µm - 5 µm
LA97 Nanometer linear stage Application: scanning Benefit: Nanometer-positioning, also vertically Features: positioning with extreme resolution and highest stiffnes can be can ...
Steinmeyer Holding GmbH
Stroke : 6.5, 12.5 mm
... products are high-precision translation stages of Daheng Optics.The stage is constructed with a full aluminum body and crossed-roller steel bearings for precision motion and high-load ...
Daheng New Epoch Technology,Inc(CDHC)
Stroke : 6.5 mm
GCM-T Series Translation Stages manufactured by Daheng Optics, which is made of aluminum alloy. These stages use crossed-roller bearings to support precision motion and high load capacities. ...
Daheng New Epoch Technology,Inc(CDHC)
Stroke : 13, 25 mm
... products are new precise side-driven vertical stage launched by Daheng Optics. They are made of aluminum alloy. The type of guide is crossed-roller bearing, which improves the accuracy and load capacity ...
Daheng New Epoch Technology,Inc(CDHC)
Stroke : 100 mm - 1,500 mm
... Product type • Linear table Characteristics • Linear table for precise postioning • Integrated Aluminium roller guide • Spindle drive • Metal cover Stroke lengths • Infinitely variable from ...
Stroke : 26 mm
Speed: 20 mm/s
Repeatability: 40, 200 nm
... piezo stage show the dimensions and specifications of an SLC-1740 for atmospheric or HV environments, equipped with an S-position sensor. For technical drawings and detailed specifications of other variants, such as UHV ...
SmarAct GmbH
Stroke : 31 mm
Speed: 20 mm/s
Repeatability: 40, 200 nm
... piezo stage show the dimensions and specifications of an SLC-1750 for atmospheric or HV environments, equipped with an S-position sensor. For technical drawings and detailed specifications of other variants, such as UHV ...
SmarAct GmbH
Stroke : 41 mm
Speed: 20 mm/s
Repeatability: 40, 200 nm
... piezo stage show the dimensions and specifications of an SLC-1760 for atmospheric or HV environments, equipped with an S-position sensor. For technical drawings and detailed specifications of other variants, such as UHV ...
SmarAct GmbH
... allowed the unit's travel to be adjusted when needed. All components were manufactured from stainless steel or anodized aluminum to provide corrosion resistance. The custom design of ...
... This measuring table from Opto offers high quality at a reasonable price Alternatively Opto offers further measuring stages for incident and transmitted light applications in the sizes 25mm x 25mm and 50mm x 50mm. Opto's ...
Stroke : 18 mm
Speed: 1.2 mm/s
... mm travel at 30 x 40 mm footprint our all-rounder multi axes combinations without adapter plates Miniature translation stage with piezo electric inertial drive. Vacuum edition of MS 30 - 18mm.
... clear aperture to allow the passage of the optical path or cables directly through the stage. The main body of the stages is made from lightweight anodized aluminum and ...
IntelLiDrives, Inc.
... clear aperture to allow the passage of the optical path or cables directly through the stage. The main body of the stages is made from lightweight anodized aluminum and ...
IntelLiDrives, Inc.
... clear aperture to allow the passage of the optical path or cables directly through the stage. The main body of the stages is made from lightweight anodized aluminum and ...
IntelLiDrives, Inc.
Stroke : 3.81 cm - 64.77 cm
Repeatability: 4 µm
Load: 6.8 kg
... Series is ideal for moving small sensors. A15 Series UniSlides are comprised of an aluminum alloy extruded dovetail base with 60 degree opposing V-type ways. An aluminum alloy carriage that runs in ...
VELMEX, Inc.
Stroke : 3.81 cm - 62.23 cm
Repeatability: 4 µm
Load: 13.6 kg
... Series UniSlide stage has a body width of 2.5 inches, slider length of 2.5 inches and can carry a 30 lbs. horizontal load. The A25 can travel up to 24.5" with the 2.5" slider/carriage. A25 Series UniSlides are comprised ...
VELMEX, Inc.
Stroke : 5.08 cm - 96.52 cm
Repeatability: 4 µm
Load: 45.5 kg
... Series UniSlides are comprised of an aluminum alloy extruded dovetail base with 60 degree opposing V-type ways. An aluminum alloy carriage that runs in the dovetail ways of the base. Lead screws are constrained ...
VELMEX, Inc.
... hydraulic clamps feed by pneumatic pressure multiplier •Maintenance free •Superior dynamic performance •High degree of positioning accuracy
... radial error motion to a nanometre-level, even during rotation. This makes the XRT-A unique and the most precise piezo rotation stage on the market. With a radial error motion smaller than 500 nm, the XRT-A achieves ...
IKO Precision Positioning Table TE is a lightweight and compact positioning table using high-strength aluminum alloy for its main components, with a slide table assembled ...
IKO Nippon Thompson Europe
IKO Precision Positioning Table L is a lightweight, long stroke positioning table configured with the slide table and bed made from high-strength aluminum alloy. High ...
IKO Nippon Thompson Europe
The IKO Linear Motor Table LT is a compact and high-precision positioning table made of aluminum alloy, with an optical linear encoder built in and an AC linear servomotor incorporated ...
IKO Nippon Thompson Europe
Stroke : 6 in - 42 in
... to support long product life as well as lower maintenance requirements. SteadyRail utilizes high quality aluminum, carbon steel and stainless steel materials and features a number of sizes, pillow blocks ...
Stroke : 25 mm - 50 mm
Speed: 4 mm/s - 30 mm/s
Repeatability: 1.6 µm - 2.1 µm
LA85 - Vacuum linear stages and axes Compact focus linear stage HV / UHV, 25 mm travel, 1.6 µm repeatability, 4 kg load • Vacuum: all ranges HV / UHV up to 10E-8 mbar • Lubrication liquid up ...
Stroke : 15 mm - 115 mm
Manual Dovetail Stage Type MC-C (Z) Z-Axis Guide- Dovetail type – pinion and rack. It is suitable for higher working frequency, requirement of faster movement and large stroke. Single slide block or Two slide blocks Transmission ...
GMT Europe GmbH
Stroke : 3 mm - 9 mm
– Manual Dovetail Stage – Single Axis – Guide: Dovetail type – pinion and rack – Suitable for higher working frequency, requirement of faster movement and large stroke – Transmission ...
GMT Europe GmbH
Stroke : 3 mm - 9 mm
... Dovetail Stage – XY Axis – Guide: Dovetail type – pinion and rack, for higher working frequency, requirement of faster movement and large stroke – Transmission Parts: Feeding screw for simple precise tuning – ...
GMT Europe GmbH
Stroke : 44.5, 76 mm
The innovative design of our high load lab jack employs three orthogonal hinges that straighten to form a box making them more stable with increasing height. •High load capacity labjack without creep •Unique orthogonal hinges minimize ...
MICRO-CONTROLE / Spectra-Physics
Stroke : 0 mm - 2,860 mm
Speed: 1.3 m/s - 1.5 m/s
... drive system for almost any application • Available in four sizes finely graduated length increments • High rigidity, positioning accuracy and repeatability • Highly precise procedure behavior over the entire travel ...
• Resolution up to 20 nrad, excellent position stability • Optical beam deflection to 4 mrad • Various different materials for adapting the CTE between the platform and mirror • Parallel kinematics for higher accuracy and dynamics • ...
Physik Instrumente
Stroke : 50, 100, 25, 150 mm
Speed: 300 mm/s
Repeatability: 50, 100 nm
ABL1000 series stages are the highest performance miniature air-bearing stages available. They are ideal for space-constricted applications where ultra-precise positioning accuracy and ...
Aerotech
... 65 •on positioners with M4 threads in 34 x 34 mm grid The rotary tilt stages DNT 40 are a combination of an angular stage WV 40-D25 with a tilt stage NT 40. The stages ...
OWIS GmbH
Speed: 10 mm/s
Repeatability: 300 nm
Load: 150 g
... provides not only the practical positioning resolution but also the more compact size, the better tolerance for the environment and the competitive price. It is highly adaptable to any application requiring high-precision ...
Stroke : 50 mm
Motorized translation stage 8MT30-50 is a newly developed stage, which incorporates all the improvements and modifications implemented since its predecessor 8MT173-20-50 was launched. 8MT30-50 replaces ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Positioning stages
- Microscope positioning stages
- Heavy load positioning stages
- High-speed positioning stages
- Measurement positioning stages
- Open-loop positioning stages
- Wafer handling positioning stages
- Positioning stages with integrated controller
- Micrometric positioning stages
- Positioning stages with motor encoders
- AVM positioning stages
- DAHENG OPTICS positioning stages
- DAHENG OPTICS heavy load positioning stages
- Fuyu positioning stages
- Fuyu high-speed positioning stages
- Fuyu heavy load positioning stages
- IKO positioning stages
- STEINMEYER positioning stages
- STEINMEYER microscope positioning stages
- STEINMEYER wafer handling positioning stages
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining