{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
... highest possible precision for the fit of the tool holders in your machine spindle. We produce Goldring tool holders according to DIN 69893, DIN ...
• Connection between machine spindel and chucking tool head (e.g. drill chuck) • taper shank with flat tang DIN 228 part 1
• Connection between machine spindel and chucking tool head (e.g. drill chuck) • Jacobs drill chuck taper DIN 238
WZ-toolholders- DIN 1835-B for Gigant modular sprinter coating: without
WZ-toolholders-DIN 1835-A for Gigant modular M 16 Item number GZ5521A4.320108
WZ-toolholders-DIN69871 AD/B for Gigant modular DIN 138
... Taper to OD Taper Taper Accuracy AT3, better spindle-to-holder fit and accuracy Surface Finish max. Ra 0.25, higher clamping force and higher transferable torque ID Chip Hole per DIN 69873 ...
... μm ID Taper to OD Taper Taper Accuracy AT3, better spindle-to-holder fit and accuracy Surface Finish max. Ra 0.25, higher clamping force and higher transferable torque ID Chip Hole per DIN 69873 with ...
... Taper to OD Taper Taper Accuracy AT3, better spindle-to-holder fit and accuracy Surface Finish max. Ra 0.25, higher clamping force and higher transferable torque ID Chip Hole per DIN 69873 ...
A TYPE (CAST IRON BODY) Product Description Model No. LD-BT30A / LD-BT40A / LD-BT50A / LD-DIN40A / LD-DIN50A / LD-CAT40A / LD-CAT50A Vertical tool rest : aluminum.
... TYPE Product Description Pull type tool is also suitable. The rotation angles are as follows:95°,45°, 180°. Model No. LDA-HSK63 /LDA-HSK50 / LDA-HSK40 / LDA-HSK32 / LDA-ISO20 / LDA-ISO25 / LDA-ISO30 / LDA-DIN30
Clamping range: 32 mm - 40 mm
Black oxide finish for antirust Type of taper shank: DIN 69893 Good seismic performance ensure the precision of hole machining For holding shell mill cutters like slot milling, ...
Shanghai Nagoya Precision Tools Co., Ltd.
Clamping range: 32 mm - 40 mm
Black oxide finish for antirust Type of taper shank: DIN 69893 Good seismic performance ensure the precision of hole machining For holding shell mill cutters like slot milling, ...
Shanghai Nagoya Precision Tools Co., Ltd.
Clamping range: 8 mm - 14 mm
... antirust ability With high performance electromagnetic induction heating equipment, the tool clamping can be completed in a few seconds Type of taper shank: DIN 69893 Internal hole tolerance : H6
Shanghai Nagoya Precision Tools Co., Ltd.
SK DIN 69871 – HSK DIN 69893 Adapter Toolholders with HSK-tapers shank DIN 69893-1
Arno Werkzeuge
MAS BT – HSK DIN 69893 Adapter Toolholders with HSK-tapers shank DIN 69893-1
Arno Werkzeuge
... high-speed DIN 69882-8 Best possible coolant supply through coolant channels in the boring Concentrated coolant supply up to 20.000 r.p.m. to the cutting edge Base-body balanced G 2,5 - 15.000 r.p.m. or U < 1 gmm Delivery ...
Arno Werkzeuge
Rotational speed: 12,000 rpm
... advantage in machining - thanks to the HAIMER tool clamping and tool holding technology. Steep taper DIN ISO 7388-1 SK30/SK40/SK50 (formerly DIN 69871) The traditional ...
... position of the holder in the spindle is granted with a high repetitive accuracy when exchanging the tools. In the DIN 69893-1 HSK-A interface design an additional torque transmission ...
Standard Program CNC tool holders APPLICATION Application: Milling, Drilling Machine type: Machine Centers FEATURES - Collet chuck ER for collets ISO 15488 (DIN 6499) - Super ...
... drilling and rubbing operations Machine type: Industrial robots FEATURES Spindle holder: DIN 1835 form B and E; all other holders (e. g. HSK) possible Tool holder: ...
Clamping range: 3 mm - 25.4 mm
Rotational speed: 0 rpm - 30,000 rpm
... the cutting edge as it is transmitted up through the tool holder. The key benefits to in-process dampening are that the machine spindle is protected along with both the life of the cutting tool ...
Clamping range: 2.5 mm - 22.4 mm
... conventional drill presses and radial arm drill presses for right hand tapping on non reversing Acceptance Morse taper with tang DIN 228-B Special features rapid backout 2:1 with inbuilt planetary gear drive immediate ...
FAHRION
... ordered separately. BA352D1020101A TC312 DIN371 Tap TC JIS Tap: M1~M1.8 Tap Shank ØD: 2.5 Tap Shank□: 2.1 Capacity: M3~M14 L1 (mm): 22 L2 (mm): 25 ØD1 (mm): 19 ØD2 (mm): 32 BA352D1020102A TC312 DIN371 ...
CHUMPOWER MACHINERY CORP
... SPECIFICATIONS BA352D6040101A TC312 DIN376 Tap TC JIS Tap: M3.5 Tap Shank ØD: 2.5 Tap Shank□: 2.1 Capacity: M3-M14 L1 (mm): 22 L2 (mm): 25 ØD1 (mm): 19 ØD2 (mm): 32 BA352D6040102A TC312 DIN376 ...
CHUMPOWER MACHINERY CORP
... on request. BA354D6040101A TC312B DIN376 Tap TC DIN Tap:M3.5 Tap Shank ØD:2.5 Tap Shank □:2.1 Capacity:M3~M14 L1 (mm):22 L2 (mm):7 ØD1 (mm):19 ØD2 (mm):30 BA354D6040102A TC312B DIN376 ...
CHUMPOWER MACHINERY CORP
IMS
For all machinery using Tool holders DIN 69871 without drugging cuts.
IMS
IMS
Clamping range: 68 mm
Rotational speed: 8,000 rpm
... you perform the tool change faster than your competitors. In addition, your driven tool adapts to your requirements in the future. Due to the modular interface, for each machining process, the ideal tool ...
EWS Weigele GmbH & Co. KG
Rotational speed: 8,000 rpm
... you perform the tool change faster than your competitors. In addition, your driven tool adapts to your requirements in the future. Due to the modular interface, for each machining process, the ideal tool ...
EWS Weigele GmbH & Co. KG
Rotational speed: 6,000 rpm
... you perform the tool change faster than your competitors. In addition, your driven tool adapts to your requirements in the future. Due to the modular interface, for each machining process, the ideal tool ...
EWS Weigele GmbH & Co. KG
Clamping range: 0.2 mm - 25 mm
• - Holding force up 1100 Nm • - WZ-Concentricity < 0,003 mm • - Clamping procedure <10 Sekunden • - Clamping diameter from 0,2 - 25 mm
Clamping range: 89 mm - 129 mm
... adapters to DIN 2080 •003 13 32 .. .. 02 Reducing adapters to DIN 69871 and MAS-BT •003 13 54 .. .. Basic adapters for modular tooling •003 13 57 .. .. Front contact adapters for screw in-tools •003 ...
LAIP
Rotational speed: 8,000 rpm
ARBORS made according to the DIN 69871, MAS 403 BT, DIN 2080, ANSI-CAT, DIN 69893 and ISO 26623 standards and manufactured in carburized steel, hardened and ground to AT3. BALANCING at ...
D'Andrea S.p.A.
Clamping range: 6 mm - 32 mm
Rotational speed: 25,000 rpm
... 2.5 / Application: For clamping tools with side flat to DIN 1835 B and DIN 6535 HB. Optional extras: Pull studs (PS) No. 308600 − 308806. Pull stud wrenches No. 308820; 308835
Garant
Clamping range: 3 mm - 32 mm
Rotational speed: 25,000 rpm
... circumference). Prolonged tool life due to its low heating temperature and better rigidity, accuracy and stiffness. Slim design with a 4.0° nose angle, according to DIN69882-8 standard. The INTEGRAL ...
ISCAR Tools
Clamping range: 1.8 mm - 14.9 mm
... main purpose of the tool holders is to protect machines from heat generated during the Formdrill process. All holders have a special heat sink for dissipating excess heat generated by ...
Formdrill
Clamping range: 6 mm - 16 mm
Rotational speed: 12,000 rpm
... optimised machining performance. COOLCAP® arbors are available with machine-side connections HSK 63 – Type A and SK 40 – DIN 69 871 AD respectively for Solid Carbide End Mills in the diameters 6, 8, 10, 12 and 16 mm. ...
POKOLM Frästechnik GmbH & Co. KG
... Through-coolant capable Available in microadjustment for 0.00005" or 0.001 mm increments Adapts to modular shanks: CAT, BT, DIN 69871A, DIN 2080, morse taper, NMTB, and HSK shanks available Max cutting ...
Allied Machine & Engineering
... wide selection of static tool holders for the VDI interfaces. The VDI interface has proven itself for many years. The clamping via the toothing ensures a quick tool change. VDI ...
Eppinger
... chucks, test arbors, balance plugs, grind quills and adapters - Meets the following standards: ANSI B5.50, ANSI B5.18, DIN 69871, DIN 2080, JIS B6339 - Designed, manufactured, tested and certified ...
to DIN ISO 10897 for tools with cylindrical shank for tools with thread for draw-in bolt Clamping tolerance: Type A collets: for tool shanks with tolerance h 10 Type ...
Please specify:
Help us improve:
remaining