- Machine-tools >
- Machine Tool Accessory >
- ISO chuck >
- Arno
Arno ISO chucks
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
... Suitable for high pressure coolant up to 80 bar (1160 psi) More back-ends to fit your machine Application Chuck designed to eliminate oversized threading Suitable for all synchronized tapping operations
Sandvik Coromant
Clamping range: 0.38 mm - 24 mm
Impact-resistant key-type drill chuck with key. Conical/threaded mount in acc. with DIN ISO 10887 (toothing in acc. with DIN 6349). For clockwise and counterclockwise rotation. PRIMA-S / -M: Medium-heavy ...
RÖHM GmbH
Clamping range: 1 mm - 26 mm
• Impact-resistant key-type drill chuck with key. Conical/threaded mount in acc. with DIN ISO 10887 (toothing in acc. with DIN 6349). • For clockwise and counterclockwise rotation. Hardened keyholes ...
RÖHM GmbH
Clamping range: 1 mm - 13 mm
Impact-resistant key-type drill chuck with key. Conical/threaded mount in acc. with DIN ISO 10887 (toothing in acc. with DIN 6349). For clockwise and counterclockwise rotation. Physical characteristics Hardened ...
RÖHM GmbH
Clamping range: 6 mm - 32 mm
HSK-A according to ISO 12164-1 / DIN 69893-1for MQL 1-channel systems, Gühring MQL identifiable by green colour ringbalancing quality: G 2.5 / 25,000 rpm or rev. < 1 gmmfor tool shanks d1 h6axial length adjustmenT
Clamping range: 0.2 mm - 3 mm
PGR Collet Chuck 6820 Collet chuck, hollow taper shank (HSK-A 63) according to DIN ISO 69893-1, for PGR collets. Product features and benefits: Designed for internal coolant supply. High ...
AKKO CUTTING TOOLS
AKKO CUTTING TOOLS
AKKO CUTTING TOOLS
... rotation angles are as follows:95°,45°, 180°. Model No. LDA-HSK63 /LDA-HSK50 / LDA-HSK40 / LDA-HSK32 / LDA-ISO20 / LDA-ISO25 / LDA-ISO30 / LDA-DIN30
Clamping range: 0.3 mm - 34 mm
16 degree Collets with DIN6499/ISO15488 Standard. EVERY SINGLE Alps Tool's AR collet is inspected without exception. The collets are inspected THREE TIMES at different position, and only those that meet the standards ...
... Machine type: Machine Centers FEATURES - Collet chuck ER for collets ISO 15488 (DIN 6499) - Super chuck collet chuck - Milling Cutters (Weldon / Whistle Notch) - ...
... accurate tool tip height positioning when tools are changed. Besides HSK-T holders for outside and inside taper complying with ISO 12164-3/4, ARNO has a wide selection of special holders for your STAMA machining centres.
Arno Werkzeuge
Holders with screw clamping Right-hand execution shown AFC = AFC interface AHA = fix stop
Arno Werkzeuge
Holders with screw clamping Right-hand execution shown AFC = AFC interface AHA = fix stop
Arno Werkzeuge
Application for holding tools with cylindrical shanks in collets DIN 6499/ISO 15488 (ER/ESX) Acceptance Morse taper shank with draw-in thread DIN 228-A tang to modify the holder into execution DIN 228-B on request Concentricity ...
FAHRION
Clamping range: 0.3 mm - 16 mm
... guaranteed because of 100%. 6.All drill chucks are capable combined with SKI, ISO, BT, VDI, HSK tool holder. *All the drill chucks are capable combined with SK, ISO, ...
CHUMPOWER MACHINERY CORP
... available on request. BA352S5010101A TC312 ISO529 Tap TC ISO Tap:M1~M2 Tap Shank ØD:2.5 Tap Shank □:2.0 Capacity:M3~M14 L1 (mm):22 L2 (mm):25 ØD1 (mm):19 ØD2 (mm):32 BA352S5020101A TC312 ...
CHUMPOWER MACHINERY CORP
... available on request BA352S2030101A TC312 ISO529/2283 TC ISO Tap:M3 Tap Shank ØD:2.24 Tap Shank □:1.8 Capacity:M3~M14 L1 (mm):22 L2 (mm):25 ØD1 (mm):19 ØD2 (mm):32 BA352S2040101A TC312 ...
CHUMPOWER MACHINERY CORP
Rotational speed: 12,000 rpm
... the HAIMER tool clamping and tool holding technology. Steep taper DIN ISO 7388-1 SK30/SK40/SK50 (formerly DIN 69871) The traditional interface for milling spindles DIN ISO 7388-1 (formerly 69871) ...
The ISO 26623 spindle interface is an innovative tooling system with maximum precision and particularly widespread in multi-task machines (turn-mill centres). The torque transmission and centring takes place via the polygon-shaped ...
For applications on HAAS Office Mill machining centers T.I.R. <3 μm ID Taper to OD Taper Surface Finish max. Ra 0.25, higher clamping force and higher transferable torque Q+ Balancing, 100% balanced to G 2.5 @ 40000 min-1 For more ...
IMS
IMS
IMS
... ; ● Internal Coolant. Application: ● This high-precision chuck is for high-speed machining with carbide drills, reamers and end mills; ● It provides the highest rigidity as the chuck and nut are ...
Clamping range: 1 mm - 20 mm
Rotational speed: 25,000 rpm
Notice: Collets and wrenchs shall be ordered separately.
To offer our customers a complete range of solutions, TDM SA supplies the following: auxiliary units, ISO and HSK interface cones, tool holder cones, extensions and collets with clamping nuts. They are optimized to be ...
... grinding machine or for vertical grinding machines and multitask machines We have increase our product range in POLIGONAL ISO 26623- LC6
LAIP
Rotational speed: 8,000 rpm
ARBORS made according to the DIN 69871, MAS 403 BT, DIN 2080, ANSI-CAT, DIN 69893 and ISO 26623 standards and manufactured in carburized steel, hardened and ground to AT3. BALANCING at 8.000 RPM. PR For each MHD size ...
D'Andrea S.p.A.
Clamping range: 6 mm - 32 mm
Rotational speed: 25,000 rpm
Standard: DIN 6359 Arbor standard: ISO 7388-1 Shape: ADB Balance quality G at rotational speed: G 2.5 Concentricity: ≤ 3 µm Version: With Balluffchip bore. GARANT − All shanks hard turned (for smooth cutting ...
... the most popular holders and tools with IM63 XMZ shanks for grooving and parting blades and adapters and for integral shank ISO tools. Following market demand ISCAR expanded the range with holders for rotating tools.
The Steadyline® vibration damping shell-mill holders provide highly efficient performance in a variety of applications. The EPB 5556 conical-reinforced shape maximizes the rigidity of the holder, to achieve high static and up to three ...
Suitable for all standard Capto / PSC adapters (according to ISO 26623). With automatic ejection function and easy handling. High rigidity and stiff ness. High concentricity and repeat accuracy. For static and driven ...
... toolholders. These includes workholding collets and toolholding collets. They also offer collet chucks and toolholders in compliance either with the UGV - HSC or ISO - 10-20-25 standard. In addition, ...
Tool holders for the Brembama (new type). These tool holders include grinding wheel, drill point and ER collet chuck machine holders.
DK Holdings
iso 40 brembana old type code type fitting ø (mm) l (mm) sa01003 tool holder - 35 47 sa01231 flange flangia 50 5 sa01381 flange flangia 50 70 sa01014 1/2 gas holder 1/2 gas 45 45 sa01241 1/2 gas holder m30 45 45 sa01252 ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining