- Power Transmission - Mechanical components >
- Actuator and Positioning System >
- Stainless steel cylinder >
- ARO
ARO stainless steel cylinders
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Bore: 32 mm - 100 mm
Pressure: 10 bar
Ambient temperature: -30 °C - 80 °C
... piston is aluminium and the sensor bracket, when required is in stainless steel 316. The cylinder can be fixed via the threaded holes in the tie rod nuts or with the wide range of stainless ...
Stroke : 30 mm - 1,200 mm
Ambient temperature: 0 °C - 60 °C
The Series 1800 Electric cylinders are available four sizes, 32-40-50-63, and can be provided with or without in line or parallel mounted electric motors by Siemens. In the event of the customer wanting to use they’re ...
Stroke : 0 mm - 1,200 mm
Force: 0 N - 9,300 N
Speed: 0 m/s - 1.3 m/s
... -based cylinders these electric cylinders add programmability, the option of closed loop control, plus high thrust force, high durability and a long service life to your application. An electromechanical ...
Stroke : 300 mm - 3,100 mm
Force: 70, 160, 110 kN
Motor power: 30 kW
... smaller motor. CASM made of stainless steel Ewellix has developed a CASM special version made of stainless steel suitable for direct contact with foodstuffs in accordance ...
Stroke : 0 mm - 1,000 mm
Force: 0 N - 253 N
Speed: 0.2 m/s - 2.5 m/s
... smooth round cylinder design. • Bore sizes 10 to 25 mm with strokes up to 500 mm. • Temperature range up to +150° in High temperature • Stainless steel tube and anodised end covers ...
Parker Hannifin France SAS
Stroke : 0 mm - 500 mm
Force: 138 N - 4,418 N
Speed: 0.01 m/s - 0.77 m/s
... installation there are holes through the cylinder body that can be used with through bolts or female threads on both front and rear plates. A wide range of ISO 15552 cylinder mountings are available for ...
Parker Hannifin France SAS
Stroke : 0 µm - 6,000,000 µm
Force: 47 N - 3,010 N
Torque: 0.2 Nm - 360 Nm
... and simple traverse / transfer applications. Product Overview The OSP-P with stainless steel sealing band for ultra-low friction is a completely modular designed rodless cylinder. It ...
Parker Hannifin France SAS
Stroke : 10 mm - 1,000 mm
Pressure: 1 bar - 10 bar
Speed: 10 mm/s - 1,000 mm/s
... compliance with ISO 6432 » Stainless steel rod and barrel » Anodized aluminium end-blocks » Cushioning types: mechanical with bumper, pneumatic auto-cushioning, adjustable pneumatic cushioning Series ...
CAMOZZI AUTOMATION
Stroke : 10 mm - 2,500 mm
Pressure: 1 bar - 10 bar
Speed: 10 mm/s - 500 mm/s
... Materials - coated AL end blocks AL piston rolled AISI 420B stainless steel (Ø 160-200 mm) or chrome plated steel (Ø250-320 mm) rod, zinc-plated steel rod nut, anodized ...
CAMOZZI AUTOMATION
Stroke : 10 mm - 2,500 mm
Pressure: 1 bar - 10 bar
Speed: 10 mm/s - 500 mm/s
... end-block. Materials - AL end blocks and piston - rolled AISI 420B stainless steel piston rod - zinc-plated steel piston rod nut - anodized AL-profile tube zinc-plated steel ...
CAMOZZI AUTOMATION
Stroke : 1 mm - 500 mm
Bore: 8 mm - 25 mm
Pressure: 10 bar
Mini-cylinders to ISO 6432 with a chamfered stainless steel barrel. Can be used with different types of sensors. Available in various versions with a wide range of accessories: • ...
METAL WORK
Stroke : 1 mm - 500 mm
Bore: 32, 42, 50, 63 mm
Pressure: 10 bar
This version of cylinder is used to keep the parts fixed to the piston rod at an angle and to apply torques within the specified limits. The piston rod of the Two Flat has two opposing longitudinal surfaces; it is ...
METAL WORK
Stroke : 25 mm - 500 mm
Bore: 32 mm - 100 mm
Pressure: 10 bar
Anti-rotation cylinders with axial dimensions to ISO 15552. Serie STD barrel. • polyurethane gasket Quantity per package: 0 Minimum order quantity: 0 Unit of measure: items
METAL WORK
Stroke : 1 mm - 500 mm
Pressure: 1.5 bar - 10 bar
Force: 30.2 N - 1,870 N
Long-lasting cylinder based on ISO 6432 with self-adjusting end-position cushioning and extensive accessories. • Wide range of variants for customized applications • Good running performance and long service life • ...
FESTO
Stroke : 10 mm - 200 mm
Pressure: 1.5 bar - 10 bar
Force: 30.2 N - 294.5 N
... before. Ideal for tight spaces. Extremely robust thanks to its durable materials. • Compact variant of standards-based cylinder DSNU • Quick and easy installation, even in tight spaces • Light weight • Self-adjusting ...
FESTO
Stroke : 1 mm - 500 mm
Pressure: 1 bar - 10 bar
Rod diameter: 12 mm - 63 mm
With NSF-H1 grease and a clean design. Very reliable and durable due to dry-running seal. And always correctly adjusted thanks to the self-adjusting end position cushioning system PPS – without the dirt-prone adjusting screw. • Corrosion ...
FESTO
Stroke : 100 mm
Pressure: 1 bar - 16 bar
Force: 12,064 N
High performance, ruggedness and reliability Extensive range of mountings Medium: - Compressed Air Port size: - G3/4 Cylinder diameter: - 160 mm
Norgren
Stroke : 160 mm
Pressure: 1 bar - 16 bar
Force: 18,840 N
High performance, ruggedness and reliability Extensive range of mountings Medium: - Compressed Air Port size: - G3/4 Cylinder diameter: - 200 mm
Norgren
Stroke : 50 mm
Pressure: 1 bar - 10 bar
Force: 50 N
... adjustable cushioning Nose mounting nut and piston rod locknut as standard Medium: - Compressed Air Port size: - M5 Cylinder diameter: - 16 mm
Norgren
... there is smooth low friction operation. The standard 303 stainless steel comes with 1-1/8-inch bore cylinders. The adjustable cushions provides superior control for cylinder ...
ARO, Ingersoll Rand
... components have been manufactured of stainless steel. The tie rod construction and the 10 standard mounts made available by the manufacturer make this item even more useful for a various range of applications. ...
ARO, Ingersoll Rand
... walled tubes can withstand denting and the cylinder utilizes washout-proof factory-lubricated grease. This cylinder is available with an extruded barrel in bore sizes of 1-1/2", 2", 2-1/2", 3-1/4" and ...
ARO, Ingersoll Rand
Stroke : 40 mm - 20,000 mm
Force: 0.3 kN - 60 kN
Torque: 0.14 Nm - 265.39 Nm
... Series Servo Electric Cylinder with advanced servo cylinder structure design and imported parts assembly, ensure that Lim-Tec servo electric cylinder in the domestic leading linear motion.Rolled ...
Stroke : 50 mm - 3,000 mm
Force: 0.3 kN - 1,000 kN
Speed: 10 mm/s - 1,000 mm/s
Servo electric cylinder can replace hydraulic cylinder and pneumatic cylinder completely with the advantages of energy conservation and environmental protection and easily connected to ...
Stroke : 10 mm - 320 mm
Pressure: 2 bar - 10 bar
Rod diameter: 20, 25, 16 mm
Component Parts and Materials 1 Steel AISI 304 Nut 2 Steel AISI 316 Piston rod 3 Polyurethane Rod seal 4 Steel AISI 304 Front cover 5 Steel AISI 304 Nut 6 Sintered ...
Stroke : 25 mm - 1,000 mm
Bore: 32 mm - 125 mm
Pressure: 1 bar - 10 bar
Component Parts and Materials 1 Stainless steel piston rod AISI 304/316 2 PU Seal 3 Bush in sinterized bronze 4 Stinless steel front cover AISI 304/316 5 PU Seal 6 Stainless ...
Stroke : 600, 250 mm
Pressure: 1 bar - 10 bar
Rod diameter: 16, 20, 25 mm
... Alternatively the pressure dew point must be at least 10°C below lowest occurring ambient temperature. Double acting pneumatic cylinder with magnetic piston and built-in cushioning rings.
Stroke : 25 mm - 2,700 mm
Force: 8 daN - 785.4 daN
... The new ISO 15552 cylinders of the Airwork CF series represent the new generation of ISO pneumatic cylinders that, thanks to the use of innovative materials and a state-of-the-art construction philosophy, ...
Airwork Pneumatic Equipment
Stroke : 25 mm - 2,700 mm
Force: 8 daN - 785.4 daN
... The new ISO 15552 cylinders of the Airwork CF series represent the new generation of ISO pneumatic cylinders that, thanks to the use of innovative materials and a state-of-the-art construction philosophy, ...
Airwork Pneumatic Equipment
Stroke : 10 mm - 320 mm
Force: 30 N - 295 N
- Stainless Steel AISI 303 rolled rod to reduce friction as much as possible - Rod and piston seals with the highest efficiency and longest durability - Metal piston to resist to extreme ...
Airwork Pneumatic Equipment
Stroke : 571 mm
Force: 2,670 N
Speed: 0.3, 0.76 m/s
... bearing housing • Type 304 stainless steel, 1/4 hard, polished thrust tube • Ball bearing support • 6063 T-6 aluminum, hard-coated anodized and Teflon-impregnated cylinder housing • ...
Kollmorgen Europe GmbH
Force: 0 N - 2,200 N
ERD low-cost electric cylinder series are the perfect alternative to pneumatic cylinders for automating manual processes. The ERD is an economical electric cylinder and is compatible ...
Stroke : max 4000.0 mm
Pressure: max 200.0 bar
Speed: max 0.5 m/s
• Piston Ø 40-100 mm • Modern seals and guide elements • Simple replacement of wear parts through rugged screw system • Subsequent retrofitting and revaluation possible through unit construction system • Rod screw thread, non-toleranced ...
Stroke : 16 mm - 25 mm
Speed: 0.05 m/s - 0.5 m/s
... lifeCylinder with hexagonal rod design enables non-rotation of rod.Hard anodised stainless steel cylinder tubes offer a high resistance to corrosion and low internal friction.Cylinder ...
Mindman Industrial
Pressure: 0.1 MPa - 1 MPa
Rod diameter: 32 mm - 100 mm
Speed: 50 mm/s - 1,000 mm/s
... AISI 316 stainless steel. Fits the chemical, food and pharmaceutical environment. Conformance to ISO 15552 specification. Available with comprehensive internationally recognised range of fixed and flexible ...
Mindman Industrial
Stroke : 5 mm - 100 mm
Bore: 12 mm - 100 mm
Pressure: 0.1 MPa - 1 MPa
•Two-stage stroke: Two compact cylinders with same I.D. but different strokes length are connected to achieve two-stage stroke. •Ultra Compact, light weight and space saving cylinder. •Wide range of ...
Mindman Industrial
Stroke : 25 mm - 1,000 mm
Stainless steel cylinders series “AX”, comply with ISO 15552 standard, are available from Ø 32 to Ø 200. They are cushioned as standard and they result suitable for aggressive environments ...
... ISO1552 pneumatic Cylinder dimensions as standard, and all special modifications you need in your project can be easily made. This provides you with ease of design. Fasteners used in pneumatic cylinders ...
Stroke : 0 mm - 300 mm
Bore: 40 mm - 75 mm
Pressure: 120 bar
... municipal vehicles, forklifts. Here are the main features: Hardened stem Rod guide systems in treated metal or with applied rings Stainless steel rod ASTM B117 96h corrosion resistant ...
Stroke : 50 mm - 2,000 mm
Force: 12 kN - 250 kN
Stainless steel cylinders All shapes and sizes of stainless steel cylinders High quality cylinders Cylinders ...
Stroke : 500 mm - 3,000 mm
... with Norsok M-501 with min. 280 microns. -and it is possible with stainless steel spherical bearings and locking ring. Alternatively, the cylinders also be produced completely in stainless. If ...
Stroke : 500 mm - 2,480 mm
Double acting cylinders For the environment, that is hard on the materials, stainless piston rods is one step up, to make lasting cylinder. Marinecylinder ø50 - Double acting ...
HIDRACAR oleo-pneumatic suspension cylinders are the ideal oleo-pneumatic suspension system for application in truck and tractor towed load trailers, tanker trailers for the transport of liquids and slurries and fumigation ...
Stroke : 200 mm
Pressure: 0 bar - 200 bar
Rod diameter: 25 mm - 80 mm
SR20 VZ stainless steel hydraulic cylinder. Standard eye, both ends. SSH Stainless hydraulic cylinders are, of course, made of highly quality stainless ...
SSH Stainless
Stroke : 200 mm
Pressure: 0 bar - 200 bar
Rod diameter: 32, 63, 80, 40, 50 mm
SR20 LL stainless steel hydraulic cylinder. Standard eye, both ends. SSH Stainless hydraulic cylinders are, of course, made of highly quality stainless ...
SSH Stainless
Stroke : 200 mm
Pressure: 0 bar - 200 bar
Rod diameter: 25 mm - 80 mm
SR20 NN stainless steel hydraulic cylinder.POM bushing, both ends. SSH Stainless hydraulic cylinders are, of course, made of highly quality stainless ...
SSH Stainless
Stroke : 10 mm - 500 mm
Bore: 20, 25, 32, 40 mm
Pressure: 22 psi - 145 psi
... performance of lubrication and guide; 5、There are several modes of back cover, which makes the installation of cylinder more convenient; 6、There are cylinders and mounting accessories with several specifications ...
Stroke : 20 mm - 100 mm
Force: 142 N - 18,720 N
The ISO 21287-compliant Stainless Steel Compact Cylinders come in bore configurations that range from Ø 20 to Ø 200. These cylinders showcase operating temperature levels ...
ARTEC SRL
Stroke : 10 mm - 500 mm
Available in bores Ø 8-10-12-16-20-25. Execution for high temperature on request. Models with or without cushioning. Extremely resistant thanks to the double rolling assembly procedure.
ARTEC SRL
Stroke : 10 mm - 500 mm
Available in bores Ø 8-10-12-16-20-25. Execution for high temperature on request. Models with or without cushioning. Extremely resistant thanks to the double rolling assembly procedure.
ARTEC SRL
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining