Distributed units are I/O peripherals specialized in a single function Connected to the Z-Link bus via optical fiber Enclosed in a IP20 stainless steel container Mounting on DIN. EN 50022 rails (Omega ...
D.Electron
... equals 2 TE Ethernet LAN port TFTP firmware update The LyconSys I/O modules are the optimal solution for controlling analog and digital I/O signals in a network. Our ...
... and outputs of the TPLC050 are expandable by adding Mect MPNC030 and MPNC035 series modules for analog signals and MPNC020 for digital signals. The analog and digital I/O ...
MECT SRL
... terminals, 4x highside output 0.4A/36V with analog feedback, 4x lowside output 1.2A/36V with digital feedback, 8x ground referenced digital input, 4x analog input 0-36V, 4x frequency input 0-10kHz ...
Industrial Cellular Remote I/O - Quick configuration by USB and Cloud - Reporting updated status to Cloud if any inputs are detected - Hundreds of combinations of trigger conditions and actions - Built-in opto-isolated ...
Next Industries s.r.l
... channel GC-3864 - T type thermocouple - Thermocouple - 4-channel GC-3874 - J type thermocouple - Thermocouple - 4-channel Analog output - GC-4602 - Voltage output, 16 bits - -5V~+5V - 2-channel GC-4622 ...
... supplemented with various modules. The analog modules of the MADDA series are perfectly suitable for the acquisition of measurement data as well as for analog controlling ...
Operating Temperature Range –20~70°C 8 channel analog input (0~5v or 0~20mA) , 12 bit 8-point isolated digit input 5-48 VDC(with SOE), or 8-point single channel counters up to 1 KHz 8-point relay output, 250VAC ...
Beijing Tengcon Technology Co.,Ltd.
... Specialty I/O Over 20 years ago, our direct interface technology was referenced within the Rockwell Automation “Pyramid Solutions Program,” now the “Encompass Program.” Since that time, AMCI has developed a complete ...
AMCI
... range - Attention: the voltage between two input terminators must be ≤±15V Order information: R-9017H, 8-channel Analog Input module-mV, V, mA
Beijing Gemotech Intelligent Technology Co., Ltd.
... may produce a startup message and the module reacts to start node and enter preoperational commands. Special Features CAN-IO Module CIO CAN I/O module ...
... High-speed USB 2.0 multifunction DAQ -Sustained sampling speeds up to 1MHz -16-bit or 12-bit resolution A/D converter -Flexible, software configured functionality -16 single-ended or 8 differential ...
... manufacturers, it is appropriate to use the MODBUS protocol. The I/O modules on offer either support a single type of I/O signal or a combination of signals. In terms of installation, ...
AMiT, spol. s r.o.
... technology is the GRIPLINK controller. It is the bridge between compatible IO-Link field devices and the robot controller. Thus, it is not an ordinary fieldbus master that would forward IO-Link signals ...
... Features •8 I/O Module •AC Power supply •Analogue Output Module •Physical Hardware Seal •RS232/RS232 Module •RS485/RS485 Module •Stainless Steel ...
Supports 4*200KHZ high-speed pulse output. Supports T, S curve acceleration and deceleration. Supports two-speed positioning and interrupt one-speed positioning. Supports variable speed operation. Supports single-speed positioning. Supports ...
- 19”, 1U rack type compact design - 54 pcs Channels Led Technology - Customized Input/Output Quantity & Current Rating; Flexible Structure - Voltage supervised Outputs - Internal Event Memory - Standard Communication ...
Key Workflow: Replaces the cards breakout cables for easy connectivity of audio I/Os. BOB8 is an elegant, safe, and ergonomic solution to connect audio input and output signals to Digigram’s multichannel sound cards ...
... NA2000 analog output expansion module is used to connect analog actuators. Technical performance index Maximum 4 channels of analog output. The output range ...
Nanda Automation Technology Jiangsu Co., Ltd.
24 V high performance module for input and output of digital and analog signals with a total of 52 IOs and various features The module has a compact aluminium ...
Sontheim Industrie Elektronik GmbH
With the DVI-I-CPU computer module, digital and analog signals can be integrated into the matrix system via a DVI interface. This interface corresponds to the well-known DVI-I standard and enables the ...
I/O acquisition modules with 4 inputs / outputs: NXT-A4 Remote I/O acquisition modules compatible with ModBus RTU (RS485) and ModBus TCP (Ethernet) protocols. Versatile ...
4neXt
... Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, ...
King Pigeon Communication Co.,Limited
F3 I/O modules Our F3 I/O modules and F3 I/O remote systems offer a cost-effective interface for your field signals, in the automation process control ...
... gateways, other iRTUe modules and third-party IEDs on the substation process bus. Product Highlights IEC 61850 GOOSE communication with a processing time under 3ms Flexible configuration of two I/O ...
Please specify:
Help us improve:
remaining