BOLZONI hydraulic lift tables
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Capacity: 450 kg
Lowered height: 280 mm
Lifting height: 280 mm - 860 mm
... ideal for parking and transporting heavy vehicle parts ergonomic and back-friendly work by lifting the platform with a hydraulic foot pump stepless drain valve with sensitive manual lowering two swivel castors with ...
... loading level where a lift-up flap does not exist or cannot be created, or to transfer vehicles and materials from the service area to the internal raised floor of the warehouse. They may be fitted with manual as ...
Capacity: 10,000 kg
Lifting height: 1,600 mm - 2,000 mm
... Dual-Dok® system provides both dock leveler and dock lift functions at a single dock position. The Dual-Dok lift/leveler saves valuable space by eliminating the part-time position of a scissors lift ...
... yard access for hand trucks. The Rite-Hite LRL is an easy to operate mix of hydraulic loading dock scissor lift operation and manual lift lip positioning. This dock lift ...
Capacity: 1,300 kg
Lifting height: 1,140 mm
Tray length: 1,600 mm
... European standards. The 2 hydraulic lifting tables have a capacity of 1300 kg each and an elevation of 1140 mm from the ground. This turntable allows easy access to the ...
Capacity: 1,000 kg
Lifting height: 800 mm
Tray length: 1,350 mm
This 1000 kg lifting table, reference TE100-135-080-4292, is quite classical. The lifting is done by hydraulic energy by a simple support on the control post. This 1000 kg lifting table ...
Lifting height: 384 mm
The Tilting Lift Table (TLT) allows the operator to lift and tilt the pallet for easy handling. Ergonomic access to the pallet container. Features ...
Capacity: 10,000 kg
Tray length: 5 m
The hydraulic table lifts have been designed to facilitate loading in any type of factory, laboratories and warehouses. They are manufactured according to specific requirements and are ...
Capacity: 100 kg
Lifting height: 237 mm - 998 mm
Stroke: 577, 592, 518 mm
The BISHAMON lifting table was specifically designed to minimise user effort, enabling easy movement and positioning of loads. STAINLESS model, compatible with food, hospital and laboratory environments. ...
Capacity: 3,000 kg
Lifting height: 200 mm - 1,500 mm
It is a Scissor Lift Table designed to improve the operators efficiency during assembly and welding processes. It is proposed in 2 main versions: Standard (Up/Down movements) and with Electrical Table ...
Capacity: 500 kg - 10,000 kg
... high do you need to lift it? And off we go. Depending on the application, we configure your lift table, assembly lift table, reverse loading lift ...
Gruse Maschinenbau
Capacity: 50,000 kg
Lifting height: 2,600 mm
... high do you need to lift it? And off we go. Depending on the application, we configure your lift table, assembly lift table, reverse loading lift ...
Gruse Maschinenbau
Capacity: 1,500 kg - 10,000 kg
Lifting height: 5 m
... high do you need to lift it? And off we go. Depending on the application, we configure your lift table, assembly lift table, reverse loading lift ...
Gruse Maschinenbau
Capacity: 680, 170 kg
... cylinder ratio General Description Converts fixed height structure to one with a 0-20” range of height adjustment Manual or electric operation Retrofit & OEM applications Custom systems available Technical Information System ...
Capacity: 5,000 kg
Lifting height: 2,000 mm
The PEF 500 Trolley is specifically made to provide a high quality functionality and performance for specific purposes. The superior quality trolley is mainly used to move components unto the assembling lines. It is also considered as ...
Capacity: 3,500 kg
Lowered height: 14 cm
Lifting height: 171, 138 cm
New pulling tower with smooth and accurate displacement of 180º. 3,3 m chassis with 45o corners for better side pulling. Double safety device and twin lifting rams.
Capacity: 3,000 kg
Lowered height: 10 cm
Lifting height: 100 cm
Super-slim pro le (only 10 cm) to fit the car quickly. It can be flush mounted. New lifting supports with height regulation with thread. High quality and 3.000 kg capacity (4.200 kg CE test).
Capacity: 3,000 kg
Lowered height: 10 cm
Lifting height: 100 cm
Revolutionary "Lift&Move" System, which enables the vehicle to be moved with the same lift between different areas. Very suitable for long term repairs. The powerLIFT.R wheels have large diameter and ...
Capacity: 10,000 kg
Lifting height: 885 mm - 6,000 mm
General Specifications • - Only lift goods. It is not proper for person carry • - ESP.1: Single Scissor Lift Table (X) • - Trap prevention touch sensitive trip bars under the perimeter ...
ONDER GRUP MAKİNE
Capacity: 500, 1,000, 2,000, 4,000 kg
Lifting height: 1,485 mm - 4,860 mm
General Specifications • - Only lift goods. It is not proper for person carry. • - ESP.2: Single Scissor Lift Table (XX) • - ESP.3: Single Scissor Lift Table ...
ONDER GRUP MAKİNE
Capacity: 2,000, 4,000, 6,000 kg
Lifting height: 1,360 mm - 2,000 mm
... . Heavy duty cylinders and check valve to stop the lift table lowering in case of hose burst High quality hydraulic cylinders Heavy duty cylinders and check valve to stop ...
ONDER GRUP MAKİNE
Capacity: 2,000 kg
Lowered height: 280 mm
Lifting height: 1,210 mm
The platform is a mobile device designed to lift or lower loads
Capacity: 50,000 kg
Lifting height: 5,000 mm
The Lifting Table is manufactured by Enzfelder GmbH. Scissor lift tables for lifting and lowering with a wide range of accessories with hydraulic ...
Capacity: 0 kg - 80,000 kg
Lifting height: 100 mm - 3,000 mm
Rugged and reliable, the XN series lift tables are available in many load capacities and sizes, also on demand. Characteristics: Extendable push button or pedal controls Power unit and electrical ...
TESIS ENGINEERING SRL
Capacity: 0 kg - 20,000 kg
Lifting height: 500 mm - 9,000 mm
Rugged and reliable, the multiple scissors XH -XT -XQ series lift tables are available in many load capacities and sizes, also on demand. Characteristics: Extendable push button or pedal controls Power ...
TESIS ENGINEERING SRL
Capacity: 0 kg - 80,000 kg
Lifting height: 500 mm - 3,000 mm
Rugged and reliable, tandem and multiple scissor XL series lift tables are available in many load capacities and sizes, also on demand. Characteristics: Extendable push button or pedal controls Power ...
TESIS ENGINEERING SRL
Capacity: 2,500, 1,000 lb
Lifting height: 48 in
... to enter table with a loaded pallet raised above the fenders, enabling the pallet to be set on the fenders, close to operators reach. May eliminate need for lift trucks. • ...
Capacity: 500 lb - 10,000 lb
Lifting height: 70 in
... . • Double Acting Cylinder Package All standard lift tables have hydraulic lift up and gravity lowering. If lowering speed is required, then order optional Double Acting ...
Capacity: 4,000, 6,000, 500, 1,000, 2,000 lb
Lifting height: 49, 60 in
... fixtures, lifting and transporting material, feeding presses, leveling tools and equipment. • Wheels and push handle make table easy to maneuver • Easy to use, foot-operated lifting cylinder • Plug-in electric motor ...
Capacity: 30,000 kg
Lifting height: 2,300 mm
The PE 30/X, a lifting platform manufactured by Morello, is used to lift any kind of load in simple, functional and secure way. Ascending platforms are typical in all manufacturing areas, with consequent reduction of ...
MORELLO GIOVANNI S.r.l.
Capacity: 15,000 kg
Lifting height: 3,950 mm
Morello's PE SR 15/DX is a lifting platform that is commonly used in manufacturing industries. It is easy and safe to operate, yet functional and cost effective as it reduces working periods. The capacity of this lifting platform is up ...
MORELLO GIOVANNI S.r.l.
Capacity: 12,000 kg
Lifting height: 2,450 mm
Morello's lifting platforms are used to lift any type of load in an easy, functional, and safe way. It is suitable for manufacturing sectors, with reduced work time and production cost. The platforms are constructed ...
MORELLO GIOVANNI S.r.l.
Capacity: 1,000, 1,500, 2,000, 2,500, 3,000 kg
Lifting height: 500, 1,000, 1,500, 2,000, 2,500 mm
HYDRAULIC LIFTING TABLES WITH INTEGRATED ROLLER CONVEYOR Hydraulically operated lift tables are universally applicable, combining ...
Dynalserg, S.L.
Capacity: 500, 30,000 kg
Lifting height: 400 mm - 7,000 mm
... connected by hydraulic hoses to the lifting and lowering cylinders of the scissor system. The hydraulic unit consists of the following components from renowned international brands: Electromotor ...
Dynalserg, S.L.
... mobile lift table, we can design autonomous mobile lift tables, with power supply by means of high-performance batteries. Special finishes are made in close cooperation ...
Dynalserg, S.L.
AVT EUROPE lift table on air cushions for easy moving and positioning and lifting loads up to 5T MAIN FEATURES _ Machine : tailor made _ Customized frame (according to your load) _ ...
Lift tables The ITS Europe lift tables on air-bearings or air cushions swivel omnidirectionally in complete 2D freedom. By using lift tables ...
Capacity: 1,000 kg
Lowered height: 85 mm
Lifting height: 860 mm - 860 mm
... with protection IP 54 positioned on the hydraulic power pack Security perimeter aluminum on the upper platform Hydraulic power unit designed for intermittent use by 30%. Keypad with low voltage controls Hydraulic ...
Capacity: 2,000, 800, 1,000, 500 kg
Lifting height: 200 mm - 1,250 mm
... Series lifting tables respond effectively to the main needs of loads’ lifting up to 2.000 kg capacity. It is therefore possible to pick beyond 20 models, entirely built, set up and tested into the Armo’s ...
Armo s.p.a.
Capacity: 2,000, 1,000 kg
Lifting height: 80 mm - 880 mm
Our extra flat lifting tables are perfect to lift pallets, with no need to make a pit. Once it gets closed, it has a very small height to the ground, and is provided with a hydraulic ...
Armo s.p.a.
Capacity: 40,000, 500 kg
Lifting height: 3,000 mm
... tailor-made scissor lifting tables specific for heavy loads’ lifting. Dimensions, capacity and stroke will be set down at the design, and realized according to the customer’s specific needs.. Our heavy ...
Armo s.p.a.
Capacity: 300, 5,000 kg
Lifting height: 1,130 mm - 4,280 mm
... more floors. Our platforms are constituted by a rigid base frame, resting directly on the floor where there is pantograph lifting system that is built with the principle of equal resistance, and to the top of it there’s ...
RDT Elevazione
Capacity: 4,000, 1,000, 500, 3,000, 2,000 kg
Lifting height: 2,150 mm - 7,800 mm
... more floors. Our platforms are constituted by a rigid base frame, resting directly on the floor where there is pantograph lifting system that is built with the principle of equal resistance, and to the top of it there’s ...
RDT Elevazione
Capacity: 500, 1,000, 2,000, 3,000, 5,000 kg
Lifting height: 3,000 mm - 6,650 mm
... more floors. Our platforms are constituted by a rigid base frame, resting directly on the floor where there is pantograph lifting system that is built with the principle of equal resistance, and to the top of it there’s ...
RDT Elevazione
Capacity: 100 kg - 100,000 kg
Capacity: 10,000 kg
Lifting height: 6,000 mm
Available in single scissor lift table and multi scissor lift tables configurations to provide the load capacity, lifting height and platform size to suit your specific ...
Edmolift UK Ltd
Capacity: 1,000 kg - 5,500 kg
Lowered height: 240 mm - 390 mm
Lifting height: 800 mm - 1,650 mm
Hymo BX Lift Tables provide the basis of many solutions to industrial lifting problems. They are produced in a range of lift heights and with load capacities from 1 to 3 tons. In tandem ...
HYMO
Capacity: 1,000, 2,000 kg
Lowered height: 200, 220 mm
Lifting height: 800 mm
Hymo EAX is available with lifting capacities 1000 and 2000 kg and a stroke of 800 mm. EAX is suited to many applications where an ergonomic working height is important. Hymo EAX is available only as a standard model and not designed ...
HYMO
Capacity: 500, 1,000, 2,000 kg
Lowered height: 200, 220 mm
Lifting height: 800 mm
Hymo AX Lift Tables is available with lifting capacities up to 2000 kg and a stroke of 800 mm. HYMO AX equipped with fork entry base frame (optional accessory) becomes a flexible solution when the movement ...
HYMO
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining