- Hydraulics - Pneumatics >
- Pump >
- Stationary pump >
- Carlisle
Carlisle stationary pumps
Flow: 18, 2.4 l/min
Pressure: 14.4, 12, 0.8 MPa
Weight: 15 kg
Flexibility thanks to modular design: Available as a standard 4-leg, mobile trolley version for small volumes with hopper or with wall mount for stationary operation No more icing in continuous operation ...
WAGNER
Flow: 0.56, 2, 3, 24, 20 l/min
Pressure: 7, 3, 6, 0.19, 0.18 bar
Johnson Electric utilizes its wide range of DC Motor, Synchronous and EC Motor technologies to develop customized impeller mechanisms which generate high power, high efficiency, low noise subsystems. Platform modules are available to ...
Johnson Electric
... Pressure gauge The Xlube can be ordered with or without a pressure gauge. Suction filter The gear pump and the pressure relieve valve inside the pump are protected from strong pollution by an ...
GROENEVELD-BEKA
... air connection All pumps within the range are to be connected to a compressed air supply line. Reservoir Pumps in the P-Series are available with or without a lubricant reservoir. Reservoirs can ...
GROENEVELD-BEKA
Pressure: 70 bar - 400 bar
Fluid temperature: -25 °C - 70 °C
The hydraulic HPG-2 is a robust and compact central lubrication pump with an integrated progressive distributor. This distributor can be used to supply directly to lubrication points or secondary progressive ...
GROENEVELD-BEKA
Flow: 2.6 l/h - 182 l/h
Pressure: 4 bar - 20 bar
Power: 25 kW - 70 kW
Reliable dosing of chemicals The new generation of the stepper motor-driven diaphragm dosing pump MEMDOS SMART provides a wide range of attractive solutions for demanding dosing tasks. The new stepper motor technology ...
Lutz-Jesco GmbH
Flow: 0.5 l/h - 15 l/h
Pressure: 3 bar - 16 bar
Power: 10 W - 29 W
Simple dosing pump in newest generation The MAGDOS LB solenoid-diaphragm dosing pump is a good-value alternative for simple and continuous dosing tasks. It is especially suitable for water treatment ...
Lutz-Jesco GmbH
Flow: 0.5 l/h - 15 l/h
Pressure: 3 bar - 16 bar
Power: 8 W - 25 W
... performance, the stroke frequency can be adjusted manually or via an external control contact. The dosing pump is compact and, thanks to the small mounting area, can be integrated into ...
Lutz-Jesco GmbH
Flow: 0 l/min - 380 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
Diaphragm pumps Fluid connections: 1” 1/2 BSP Air connection: 1/2” BSP Max Suction Lift Dry: 5 m Max Suction Lift Wet: 9,8 m Max Solid passing: 8 mm Noise level: 78 dB Max Viscosity: 40.000 ...
Fluimac srl
Flow: 0 l/min - 35 l/min
Pressure: 0 bar - 7 bar
Head: 0 m - 70 m
Diaphragm pumps Fluid connections: 1/2" BSP Air connection: 6 mm Max Suction Lift Dry: 5 m Max Suction Lift Wet: 9,8 m Max Solid passing: 3 mm Noise level: 65 dB Max Viscosity: 15.000 cps ...
Fluimac srl
Flow: 0 l/min - 4 l/min
Pressure: 0 bar - 6 bar
Head: 60 m
Diaphragm pumps Fluid connections: 1/4” BSP Air connection: 4 mm Max Suction Lift Dry: 3 m Max Suction Lift Wet: 9,8 m Max Solid passing: 2 mm Noise level: 62 dB Max Viscosity: 5.000 cps Displacement per Stroke: 18 CC~
Fluimac srl
Flow: 392 l/min
Pressure: 320 bar
Power: 155 kW
... version, WOMA provides a reasonably-priced pump-head variant in grey cast iron. The design of the pump allows easy dismantling of the valve parts and the pump head does not have to be ...
WOMA GmbH
Flow: 466 l/min
Pressure: 320 bar
Power: 184 kW
... version, WOMA provides a reasonably-priced pump-head variant in grey cast iron. The design of the pump allows easy dismantling of the valve parts and the pump head does not have to be ...
WOMA GmbH
Flow: 537 l/min
Pressure: 340 bar
Power: 240 kW
... version, WOMA provides a reasonably-priced pump-head variant in grey cast iron. The design of the pump allows easy dismantling of the valve parts and the pump head does not have to be ...
WOMA GmbH
Pressure: 6.3 bar
Head: 25, 41 m
Output diameter: 65 mm
The Rami Yokota BV YP-18 is a sump pump made from bronze, to pump aggressive fluids such as sea water. It can accommodate maximum capacity of 55 t/h and can exhibit maximum air pressure of 6.3 bar. Furthermore, ...
ASCO CO2 Transfer Pumps have steel housings and long life shaft seals. The pumps have hardened steel gears and thrust washers to give long service life. The mechanical seal fitted provides leak free operation. These ...
Flow: 44 l/min
Pressure: 150 mbar
Power: 150 W
Our innovative vapour recovery pumps ensure safe use at filling stations all over the world. No matter whether you use belt drive or direct drive - we have the right products for vapour recovery. Please contact us and ...
Flow: 0 m³/h - 19 m³/h
Pressure: 0 bar - 1,200 bar
Power: 0.1 kW - 35 kW
... versatile pump offers low life cycle costs and impressive energy efficiency. A true all-around talent for various applications. Thanks to the tried-and-tested modular system, ecoflow diaphragm metering pumps ...
LEWA GmbH
Flow: 0 m³/h - 6 m³/h
Pressure: 0 bar - 500 bar
Fluid temperature: -20 °C - 150 °C
... meter pumps in sanitary/hygienic design can also be configured with various pump heads and drives for almost all applications as food pumps and pharmaceutical pumps. We ...
LEWA GmbH
Flow: 0 m³/h - 9 m³/h
Pressure: 0 bar - 500 bar
Fluid temperature: -70 °C - 400 °C
packed plunger metering pump Its sophisticated modular system makes the LEWA ecoflow packed plunger metering pump the cost-efficient option for pumping fluids. For the LEWA ecoflow packed plunger ...
LEWA GmbH
Flow: 825, 800 m³/h
Head: 129 m
Power: 90 kW
STANDARDISED MONOBLOC ELECTRIC PUMPS An incredibly extensive and efficient range which provides a flexible response to market requirements thanks to the numerous versions available with incredible delivery times. Compact ...
SAER
Flow: 2,300, 1,700 m³/h
Head: 97, 120 m
Power: 400, 500 kW
PUMPS FOR HIGH FLOW RATES Single-stage end-suction centrifugal pump, body with dimensions meeting and exceeding EN 733. Ideal for applications where very high flow rates are required, such as irrigation ...
SAER
Flow: 5,000, 4,500 m³/h
Head: 210, 318 m
Power: 900, 1,200 kW
SPLIT-CASING PUMPS Our extremely short delivery times prove it: SKD is the split-casing range, extremely reliable and efficient, and designed, manufactured and tested in Italy. It is able to meet the needs of numerous ...
SAER
Flow: 4,000 m³/h
Head: 0 m - 200 m
Fluid temperature: 80 °C
The ClydeUnion Pumps Uniglide-e range is the latest generation of axially split, double entry pumps. The range has been developed using the latest 3D and FEA analysis software together with extensive ...
Celeros
Flow: 2,500 m³/h
Fluid temperature: 80 °C
The ClydeUnion Pumps Duoglide range consists of both configured and engineered-to-order, axially split case, two stage pumps designed for higher head/flow applications. The Duoglide provides higher efficiency ...
Celeros
Flow: 1,350 m³/h
Fluid temperature: 80 °C
... ClydeUnion Pumps Duoglide-e range is the latest generation of axial split, two stage pumps. The range has been developed using the latest 3D and FEA analysis software together with extensive consultation ...
Celeros
Flow: 0.003 l/min
Pressure: 150 mbar
Weight: 40 g
... mechanisms, and thus minimal vibrations and fewer breakdowns. The Bimor is lighter, quieter and more durable than traditional pumps. We have achieved maintenance free continuous operation for 60 months. Low power consumption ...
Flow: 0.2, 0.25 l/min
Pressure: 170, 180, 350 mbar
Weight: 140 g
The Bimor’s driving force, the bimorph, comprises two parallel piezoelectric wafers. Their nature is to expand or contract depending on the direction of the voltage. Therefore, when an alternating current is applied, one wafer expands ...
Flow: 0.1 l/min
Pressure: 0 mbar - 1,000 mbar
Input diameter: 4.7 mm
The DPE-100 is a diaphragm DC liquid pump with rated voltage of 24 V and a flow rate is 100 ml/min with working pressure range 0 - 1000 mbar. The outlet pressure range is 3 bar and the self-priming pressure is 200 mbar. ...
Flow: 480 l/min
Pressure: 8 bar
Fluid temperature: 100 °C
Diaphragm pump in aluminum series AAB-112 with membranes in EPDM, balls and seats in acetal FLUIDSFRESH OIL | WATER | DIESEL FUEL SECTORSAERONAUTIC | AGRICULTURE | AUTOMOTIVE | LUBE TRUCK AND INDUSTRIAL VEHICLE | ...
RAASM SpA
Flow: 610 l/min
Pressure: 8 bar
Fluid temperature: 100 °C
Diaphragm pump in aluminum series AAB-2 with multi ported inlet/outlet, membranes in EPDM, balls and seats in acetal FLUIDSFRESH OIL | WATER | DIESEL FUEL SECTORSAERONAUTIC | AGRICULTURE | AUTOMOTIVE | LUBE TRUCK ...
RAASM SpA
Flow: 170 l/min
Pressure: 8 bar
Fluid temperature: 65 °C
Diaphragm pump in aluminum and polypropylene series APPB-1 with 1" flanges, membranes in EPDM, balls in acetal and seats in AISI 316 stainless steel FLUIDSWASTE OIL | FRESH OIL | ANTIFREEZE | WINDSHIELD FLUID | WATER ...
RAASM SpA
Flow: 0 m³/h - 9 m³/h
Pressure: 5 bar - 11 bar
Head: 0 m - 142 m
... provided by the customer for pressure control (TWU 3 HS-ECP) High output thanks to integrated frequency converters with fixed motor speed of 8,400 rpm (TWU 3 HS-I) Reduction of well bore expansion and installation ...
Wilo
Flow: 0 m³/h - 3,500 m³/h
Pressure: 0 bar - 6 bar
Head: 33 m
... volute-casing pumps can be used where the requirement is for pumping clean, turbid or slightly contaminated liquids. Occasional solid contaminations can be handled without affecting the pump due to the ...
Flowserve SIHI Pumps
Flow: 1,400 m³/h
Pressure: 25 bar
Head: 220 m
Standard chemical process pumps of the SIHIISOchem range are horizontal, single-stage volute casing pumps with dimensions to DIN EN ISO 2858. They meet the technical requirements of EN ISO 5199. It is ...
Flowserve SIHI Pumps
Flow: 2,200 m³/h
Pressure: 25 bar
Head: 160 m
... towards the drive end, without the pump casing having to be disconnected from the piping. If a spacer coupling is used it is also unnecessary to disconnect the motor. Applications: Series CBT volute casing pumps ...
Flowserve SIHI Pumps
Flow: 10.5 l/min - 52.6 l/min
Pressure: 150 bar - 280 bar
... internal leakage is dramatically reduced, ensuring very good volumetric and mechanical pump performances, as well as proper lubrication of pump’s moving parts. ELIKA pumps are available ...
Marzocchi Pompe
Flow: 4 m³/h - 150 m³/h
Pressure: 18, 24 bar
... time required so far. NEMO® progressing cavity pump: Save costs due to FSIP® design In block construction with a flanged drive, this NEMO® pump is particularly compact and economical. ...
NETZSCH Pumps & Systems
Flow: 0.0024 m³/h - 300 m³/h
Pressure: 8, 24, 12, 18 bar
... progressing cavity pump even difficult substances can be conveyed gently and with low pulsation, regardless of fluctuations in pressure and viscosity. Low costs with the NEMO® BY progressing cavity pump In ...
NETZSCH Pumps & Systems
Flow: 0.003 m³/h - 350 m³/h
Pressure: 72, 60, 48, 36, 24 bar
... The pump is ideally suited for high-pressure applications. Four different rotor/stator geometries are available, enabling the pump to be customized perfectly to your application case. Furthermore with ...
NETZSCH Pumps & Systems
Flow: 0 l/s - 0.207 l/s
Pressure: 20 psi - 90 psi
Fluid temperature: 34 °F - 120 °F
... bar) Ultimate performance and reliability with extended service life Built-in auto shutoff, automatically shuts off pump when bag is empty and restarts when a full bag is connected Easy installation with ...
FLOJET
Flow: 14.81 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... control units for M series with filter pressure regulator, control pressure gauge and shut off valve: M4(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve ...
Maximator GmbH
Flow: 7.07 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M8(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be ...
Maximator GmbH
Flow: 4.55 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M12(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be ...
Maximator GmbH
Flow: 0.01 l/min - 16.64 l/min
Pressure: 0 bar - 200 bar
Power: 0.02 kW - 2.53 kW
ZPD external gear dosing pump Our most flexible line of external gear pumps, the ZPD has been used in countless applications the world over. Various modifications can be optimised customer-specific to ...
Beinlich Pumpen
Flow: 0 l/min - 5.2 l/min
Pressure: 0 bar - 200 bar
Fluid temperature: -20 °C - 150 °C
ZPDA external gear pump ZPDA pumps are specifically designed for start-stop dosings. The low pulsation gear design provides constant flow with very rapid pressure build-up. Internal clearances based ...
Beinlich Pumpen
Flow: 0 l/min - 1.2 l/min
Pressure: 0 bar - 150 bar
Fluid temperature: -20 °C - 150 °C
External gear pump DARTec® The DARTec® gear pump was specifically designed for high precision dosing of thermally reactive fluids. Its protected sealed needle bearing system eliminates material contact ...
Beinlich Pumpen
Flow: 500 us gal/min - 28,000 us gal/min
Pressure: 175 psi - 300 psi
Head: 30'00" ft - 530'00"
... Double-Suction Split-Case Pump has maintenance-free bearings, one-piece unitized Seal, groutless base plate, alignment-friendly coupling, reduced pump room footprint by up to 40% when compared to traditional ...
Bell & Gossett Domestic Pump
Flow: 0 us gal/min - 37 us gal/min
Head: 0'00" ft - 145'00"
Power: 0.5 ch
... Motor Shell: Constructed of AISI type 304 series stainless steel Shaft: AISI type 304 stainless steel high strength keyed pump shaft with impeller locking cap screw Discharge: 114″ NPT vertical discharge connection Suction ...
Bell & Gossett Domestic Pump
Flow: 0 us gal/min - 4,000 us gal/min
Pressure: 0 psi - 175 psi
Head: 0'00" ft - 560'00"
The Series e-1510 base mounted end suction pumps deliver the highest efficiencies, performance and durability. All pumps feature stainless steel impellers and an expanded efficiency island for efficient ...
Bell & Gossett Domestic Pump
Flow: 244 l/s - 281.2 l/s
Head: 1 m - 82.7 m
Power: 3 kW - 45 kW
Cast iron impeller with Molib-tech treatment™ / Chopper sistem able to cut particles of any shape of proportion Liquids containing solid parts and fibres Suitable for sewage, lifting of not strained black water
Flow: 401, 462 l/min
Head: 10.2, 11.6 m
Power: 0.3 kW - 0.74 kW
... seals in silicon carbide and alumina graphite in oil sump, and V-ring in direct contact with the liquid. Ecological dry motor. Pump body in single casting with motor casing.
Flow: 0.35 l/min
Pressure: 10 bar
Power: 0.09 kW
This oil gear pump is an oil control unit with a 3 l reservoir. It is comprised of a gear pump which sucks the lubricant from reservoir bottom (oil). After the pump, there is also a ...
Dropsa spa
Pressure: 4 bar
Power: 2, 2.5 W
Fluid temperature: 30 °C - 30 °C
... on lubrication systems, with a working pressure of 4 bar This range of pumps is particularly suitable for use on lubrication systems, with a working pressure of 4 bar. The pump can be provided with ...
Dropsa spa
Pressure: 3 bar
Two-outlet piston pump with pin valves for setting the flow. Placed in a central position with respect to the two out-let lines, it allows system extension. It may operate on a single line while the other line is plugged, ...
Dropsa spa
Flow: 0 m³/min - 0.35 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW
... portable drainage pump. An innovative electrode type relay unit attached to the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 1.5 m³/min
Head: 0 m - 40 m
Power: 1.5 kW - 3.7 kW
... submersible three-phase automatic cast iron high head heavy-duty drainage pump. An innovative electrode type relay unit built into the pump automatically starts and stops the pump to ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 14 m
Power: 0.55 kW
The HSD pump is a submersible single-phase portable slurry pump. It is equipped with a high-chromium cast iron agitator that assists smooth suction of the settled matters. Though the pump ...
TSURUMI MANUFACTURING CO., LTD.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining