- Detection - Measurement >
- Electrical Measurements >
- Rugged tester >
- CHAUVIN ARNOUX
CHAUVIN ARNOUX rugged testers
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
The model 308A insulation tester is intended primarily for periodic testing of industrial motors, transformers, electrical wiring, and cable insulation for signs of deterioration. Low readings may indicate impending failure ...
The model 307A insulation tester is intended primarily for periodic testing of industrial motors, transformers, electrical wiring, and cable insulation for signs of deterioration. Low readings may indicate impending failure ...
One instrument for all electrical safety tests and Power Quality analysis GSC60 was designed with the aim of making safety of electrical installations visible and valuable, easily and quickly. Thanks to the new HTOS™ system the unit ...
HT
... Fluke T150 Two-pole Voltage and Continuity Electrical Tester Fluke T150 Electrical tester: the perfect voltage tester to make your job faster, and safer. Fluke T150 Voltage and Continuity ...
FLUKE
... sufficient to verify whether the quality of the cooking oil is still good. Chain restaurateurs with the testo 270 cooking oil tester only need to change the cooking oil once critical TPM values are reached. This saves ...
... or 50 V output • Warning indicators prevent test failure • IP54 rated • Complete with leads, stakes, and rugged carry case • Simple one-button operation • Calibration test certificate included ...
MEGGER
... with leads, stakes and rugged carry case • Simple one-button operation • Calibration test certificate included • Optional earth testing kit (ETK) available The DET3TD Digital earth/ground resistance ...
MEGGER
... certificate and rugged carry case • Optional earth testing kit (ETK) available The DET4 contractor series includes - • DET4TD2: Dry-cell battery powered basic 4-terminal tester • DET4TR2: Rechargeable ...
MEGGER
... direct access to all the measurements on the front panel by means of a rotary switch. Compact because it has been designed for on-site use, the C.A 6471 is rugged and leakproof. To simplify connection, ...
CHAUVIN ARNOUX
In its rugged, leakproof case, the C.A. 6460 is easy to use, designed specifically for work in the field. Wherever it is necessary to install an earth connection or characterize an existing earth, it helps to establish ...
CHAUVIN ARNOUX
In its rugged, leakproof case, the C.A. 6462 is easy to use, designed specifically for operation in the field. Wherever it is necessary to install an earth connection or characterise an existing earth point, it helps ...
CHAUVIN ARNOUX
Mobile battery tester for voltage measurement; measurement for the electrical internal resistance and the electrochemical impedance of a battery block; capacity test via logging of current values and voltage curves; integrated ...
GOSSEN METRAWATT GmbH
... after completion, repair or expansion, and for periodic testing (DGUV regulation 3) PROFITEST INTRO – universal, handy and rugged test instrument for performing all measurements for testing the effectiveness of protective ...
GOSSEN METRAWATT GmbH
... • Indication of dangerous touch voltage • LED for measurement point illumination • Patented test probe retainer • Compact and rugged – for service calls under harsh conditions and laboratory use
GOSSEN METRAWATT GmbH
KRD102 series clamping force tester is an indispensable test method for improving products into high-quality fields. It is suitable for research, development, quality control and manufacturing of electronics, electromechanical, ...
State-of-the-art of Uniformity & Polarization Tester according to Standards. Smart_Tester allows a complete Polarization Axis and Transmittance Uniformity Check for SunLenses, SunGlasses, Masks and ...
SmartVision S.r.l.
Automatic Uniformity Tester according to ISO 12312-1, GB 39552.1, ANSI Z80.3, ISO 16321-1, EN 174 & ISO 18527-1 Easy_Tester_Pro is the Worldwide Optical Market Standard Device that performs a complete ...
SmartVision S.r.l.
... Smart_Polar is a fast, compact, rugged, accurate and extremely easy to use equipment, without any mechanical movement or adjustment, avoiding operator’s interpretation and influence, designed for hard industrial environment ...
SmartVision S.r.l.
The MI 3325 MultiServicerXD is a top-of-the-line multifunctional instrument covering diverse industrial applications, where ruggedness and reliability are a must. MEASURING FUNCTIONS • Continuity (2-wire & 4-wire), 0.2 A, 4 A, 10 ...
... cables and devices operating at high voltage. It is the only fully automated 10,000V graphical insulation tester. The Model 6550 is packaged in a rugged case that is IP54 when closed. Test results and ...
The Alluris FMT-W40 motorised wire-terminal pull-tester is designed for crimped wire terminal testing according to IPC/WHMA-A-620, UL 486, ASTM B913, USCAR 21, EN 2591-417, MIL-STD 202-H, NASA 8739-4 and many more relevant ...
... operation of the FMT-W30 pull tester makes it very easy to use, and ideal as a portable device in situations where a constant pull speed is deemed not essential, or where mains power is not available to run a motorised ...
... -use adhesion testers available in analogue or digital gauges and are suitable for measuring the pull-off adhesion of coatings up to 50MPa (7250psi) either on-site, or in the laboratory. The design of the Elcometer ...
Elcometer
The Elcometer 1510 Conical Mandrel Bend Tester is used to determine the effects of bending on the elasticity, adhesion and elongation properties of cured coatings on sheet metal. The frame has a bending lever with ...
Elcometer
This robust and user-friendly instrument is used for assessing the cupping ability of coatings applied to metal sheets up to 1.2mm (0.05”) thick. The Elcometer 1620 Cupping Tester has a 27mm (1.06”) ...
Elcometer
The KANE-VCT Voltage & Continuity Testers with Phase Rotation test are the benchmark for voltage indicators. The three-in-one tester with a rugged, ergonomically formed housing for perfect ...
... IO, Ethernet IP and others Benefits • Very robust and durable design • Extremely dirt resistant • Comprehensive quality control • High operational reliability even under harsh conditions • Compact ...
... engines. The GESERCO Soot Test Kit is a strong and rugged tool which can be operated in the field by any personnel, expert or not. Digital Optical Oil Tester: The GESERCO Rapid Optical Oil Tester ...
ERAVAP FOR CRUDE OIL is the leading solution for high precision vapor pressure and density (ASTM D4052) testing of live and dead crude oils according to ASTM D6377, IP481 and GOST 52340. Its unique cell design allows high shaking speeds ...
The flash point tester ERAFLASH with the inherently safe Continuously Closed Cup method guarantees maximum safety and speed. The small sample volume of 1-2 mL makes ERAFLASH ideal for various applications like fuels, ...
... continuitytester with phase sequence indication The Beha-Amprobe 2100-Alpha, 2100-Beta and 2100-Gamma are rugged and reliable two pole voltage testers for voltage and continuity checks. Built tough ...
BEHA AMPROBE
The extremely versatile continuity tester Testboy 2 offers an insulated, shock-resistant and break-proof plastic housing. The pluggable and screwable connection between the test leads and the terminal post is safe to ...
High Voltage Insulation Tester KEW 3121A/3122A/3123A • Rugged design with a hard carrying case for field use • Detachable High Voltage Line probe • Automatic ranges, high and low scales, indicated ...
Universal voltage tester for the entire electrical system of buildings Description: – Reliable and fast voltage tester with the most commonly used nominal voltages – Automatic AC voltage and DC voltage ...
Laserliner
Coming Soon With a new robust and compact design, the ACT 612 Intelligent Battery Tester enables fast and accurate testing of 6V/12V standby SLA batteries between 1.2Ah and 100Ah. The ...
... ADSL2+ single pair and bonding, in addition to copper testing capabilities. Coupled with the MAX-635G’s small form factor, rugged design, easy-to-use menus and clear pass/fail test result conclusions technicians can close ...
EXFO
The multi-channel acoustic wave (acoustic emission) testing system with a maximum sampling rate of 10M points/second per channel; each channel can be independently set; compatible to SWAE analysis software; three types ...
... VOLTAGE INSULATION TESTER IR3455 Maximum 5kV Test Voltage - Up to 10 Teraohm of Insulated Resistance Testing Overview Hioki insulation resistance testers or megohmmeters feature all-in-one designs ...
... Overview Hioki insulation testers or megohmmeters feature all-in-one designs including built-in rugged cases and test lead storage compartments. The IR4017-20 is a single-range, 500V/1000MΩ analog ...
... HiTESTER 3490 3-Range, 250 to 1000V Analog Insulation Tester with Continuity Check Overview Hioki insulation testers or megohmmeters feature all-in-one designs including built-in rugged ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining