- Hydraulics - Pneumatics >
- Valve >
- Flap valve >
- Clippard
Clippard flap valves
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Pressure: 0.1 MPa - 0.7 MPa
Pilot Check Valve, Compact Type – AKP To enable you to make temporary intermediate stops Construct a safety circuit – With residual pressure release function as an option Fit it anywhere – As small as 15.1 mm high ...
SMC
DN: 25 mm - 100 mm
Pressure: 10 bar
Temperature: 140, 135 °C
... robust and reliable bearing. The valve has minimal parts. Flexible design - the valve can be installed horizontally or vertically. Easy to maintain - the intermediate flange design means that ...
DN: 25 mm - 100 mm
The DELTA VPN check valve is used in places at which the reflux of liquids into the pipeline must be prevented. The valve opens through the pressure of the liquid against the spring-loaded valve ...
DN: 0.125 in - 1 in
Pressure: 0.5 bar - 12 bar
Temperature: -10 °C - 120 °C
Controllable valves for compressed air control For regulating the compressed air supply to consumers
BÜRKERT FLUID CONTROL SYSTEMS
Pressure: 0 bar - 250 bar
Temperature: -30 °C - 120 °C
Flow rate: 20 l/min
... Leak-free closing, suitable for fast cycling with long life High flow capacity In the standard version, the valve is zinc-coated for 240 h protection acc. to ISO 9227
ARGO-HYTOS
DN: 6 mm - 12 mm
Pressure: 10 bar
Temperature: -5 °C - 60 °C
Piloted non-return valves are designed to protect installations. When the compressed air supply is removed, the non-return valves will lock the air supply to the cylinder. As a resuit, the cylinder will ...
Parker Legris
DN: 0.25 in - 2 in
Check valves These one-way valves are made with bronze and brass with a seal in NBR nitrile rubber or, upon request, in Viton®, only for series 10 ... 11. To ensure a practical assembly they are available ...
DN: 0.25, 0.375, 0.5, 1, 0.75 in
Membrane check valves These valves have the same features of the previously described check valves, but they are made with anodised aluminium, which makes them particularly light. The ...
Check valves for flow control valve SF-G02 and throttle valve ST-G02 to be stacked below SF-G02 or ST-G02.
Daikin PMC
DN: 1 in - 20 in
Designed to prevent backflow, the M&J Valves Piston Controlled Check Valve is silent in operation and has no flapper to hammer against the seat. Features The patented "floating piston" rides up and ...
Celeros
DN: 1 in - 20 in
The patented "floating piston" rides up and down in the cylinder with flow surges. As flow pressure is reduced, the piston softly settles on the seat to prevent backflow. Opening and closing actions are positively controlled to minimize ...
Celeros
DN: 2 in - 36 in
This combined with M & J Valve's history of customer service, "after the sales" support and comprehensive quality assurance program ensures a product the highest standards. The swing check valve is produced ...
Celeros
DN: 10 mm
Pressure: 0 bar - 315 bar
Temperature: -30 °C - 80 °C
Size 10; A1 → A2, B1 → B2 or A2 → A1, B2 → B1; mechanically actuated Industrial hydraulic valve in a high performance range. Reliable throttling of the flow to setting value. Spindle with internal hexagon and ...
Bosch Rexroth - Industrial Hydraulics
Essential for nearly every fuel train, the Eclipse Disc Type Check valves prevent reverse gas or air flow in the system. Eclipse Series 1000 Disc Type Check Valves are designed to prevent reverse ...
Honeywell Thermal Solutions
DN: 100 mm - 200 mm
Pressure: 65 bar
Temperature: -60 °C - 150 °C
... industrial refrigeration requirements worldwide. Flexibility above all characterizes the SVL platform. Using just two basic valve housings – a straightway and an angle way – the platform offers five different functions. ...
DANFOSS Refrigeration & Air Conditioning
Pressure: 400 bar
Temperature: -40 °C - 80 °C
Flow rate: 100 l/min - 7,000 l/min
The check valve and pre-fill valve type F is a spring-loaded disk valve and has zero leakage in the closed state. The valve is attached directly to the cylinder and clamped ...
HAWE Hydraulik SE
Pressure: 0 bar - 320 bar
Temperature: -25 °C - 70 °C
Flow rate: 0 l/min - 550 l/min
Anti-cavitation valves are used for filling and emptying the press cylinders of press brakes during opening and closing in rapid traverse mode. The HAWE anti-cavitation valves which are open in basic ...
HAWE Hydraulik SE
DN: 8 mm - 30 mm
Pressure: 500, 700, 400 bar
Temperature: -40 °C - 80 °C
In the closed state the check valve type CRH and RHC has zero leakage. It can be screwed-in and can be integrated into control blocks. The necessary mounting holes are straightforward to make. Features and advantages ...
HAWE Hydraulik SE
DN: 0.125 in - 1 in
Pressure: 0 psi - 3,000 psi
Temperature: 100 °F - 400 °F
... check valves are a unique ball check design. These check valves handle uni-directional flow control of critical fluids and gases, especially in high temperature or “sticky” applications. Product Overview Parker’s ...
DN: 0.125 in - 1 in
Pressure: 0 bar - 414 bar
Temperature: -56 °C - 204 °C
Parker's CO Series check valves are designed for uni-directional flow control of critical fluids and gases in industries such as pharmaceutical,research and microelectronics. Parker’s CO Series Check Valves ...
DN: 12, 10, 6 mm
Pressure: 0 bar - 800 bar
Temperature: -57 °C - 204 °C
Flat Face quick coupling system with body sizes 1/4" up to 1" for medium pressure applications up to 800 bar. Coupling system with Parker Profile. Product Overview Parker's Flat Face Quick Coupling Series FF is a dry break coupling ...
DN: 0.125 in
Pressure: 1,000 psi
Temperature: 32 °F - 230 °F
Check Valve, 1/8 Ports Notes Not intended for pressure relief Additional Information Air Flow 20 scfm @ 50 psig; 36 scfm @ 100 psig; 580 l/min @ 6 bar Force Cracks at approximately 1/2 psig Max PSI 0-300air/0-1000hyd Mount Direct ...
Clippard
Pressure: 1,000 psi
Featuring 1/8 ports, these NPT shuttle valves come in a gold colour and have a force of about 1/2 psig. At most these devices can manage 300 of air per 1000 hyd. These shuttle valves are unsuitable for ...
Clippard
Pressure: 250 psi
Temperature: 32 °F - 230 °F
Shuttle Valve, #10-32 Male Outlet, #10-32 Female Inlets Notes Shuttle valves should not be used as a pressure selector. Flow from "A" to "C" or "B " to "C". Additional ...
Clippard
DN: 5.5 mm - 8 mm
Pressure: 0 bar - 280 bar
Temperature: -40 °C - 149 °C
... variations offer unparalleled design flexibility. This threadless, cartridge-style, one-way valve offers higher flow capacity over our standard 558 Series valve. This valve features ...
THE LEE COMPANY
DN: 2.5 mm - 8 mm
Pressure: 0 bar - 6 bar
Temperature: 0 °C - 149 °C
... Press-In Check Valve fits into many common plastic fittings. Lastly, our new 855 LC2 Series Press-In Check Valve offers more than a 65% increase in flow capacity over our previous 8.0 mm valve ...
THE LEE COMPANY
DN: 8, 5.5, 6 mm
Pressure: 400, 280 bar
Temperature: -40 °C - 149 °C
Standard Lee shuttle valves are available in three models: a 5.5 mm, 2.1 GPM* model; an 8.0 mm, 4.8 GPM* version; and our new 400 Bar valve. The new 400 Bar Shuttle Valve is just 6 mm ...
THE LEE COMPANY
Pressure: 0 psi - 505 psi
Temperature: -58 °F - 185 °F
The fuel swing check valve is an inline, swing flapper check valve that has many uses; one of which is to prevent reverse fuel flow from the ejector pumps to the engine feed subsystem. The valve ...
Flow rate: 38.3 l/min - 616.7 l/min
These check valves are mainly used on vacuum gripper systems containing multiple suction pads in order to shut off individual suction pads which are not covered. Thread size M5, G1/8, G1/4, G3/8, G1/2. Applications: - ...
DN: 5 mm - 25.4 mm
Pressure: 20 mbar - 25,000 mbar
Temperature: 0 °C - 80 °C
... chemical compatibility and operating temperatures extended. » Version for use with oxygen available Series VNR unidirectional valves are available in the Thread or Integrated Fitting version. Thanks to their construction ...
Pressure: 0.5 bar - 10 bar
Temperature: -20 °C - 80 °C
Enables air to be exhausted quickly from air reservoirs and cylinders Allows higher cylinder speeds to be achieved Simple, compact design and construction Very reliable in operation Medium: - Compressed Air Port ...
Norgren
Pressure: 0.7 bar - 10 bar
Temperature: -20 °C - 80 °C
... function Can be combined to operate from three or more sources Valves can be ganged together Medium: - Compressed Air Port size: - G1/4 Mounting: - Through holes in valve body
Norgren
DN: 6 mm
Pressure: 1 bar - 10 bar
Temperature: -20 °C - 80 °C
Easy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage Simpler pneumatic systems Medium: - Compressed Air Thread: - G1/8
Norgren
DN: 50 mm - 350 mm
Pressure: 40 bar
Split disc check valve Like the DCV, the Spirax Sarco SDCV provides a compactinstallation. The design of the SDCV resolves the size andpressure drop limitations of other check valve types. Thesplit disc ...
Spirax Sarco
DN: 65 mm - 600 mm
Pressure: 110 bar - 760 bar
The Edward Tilting Disk Check Valve is a large bore valve designed to close as quickly as possible, minimizing loud, damaging slamming and vibration noises caused by high-velocity reverse flow in high-pressure ...
FLOWSERVE
DN: 15 mm - 350 mm
Pressure: 6 bar - 160 bar
Temperature: -60 °C - 450 °C
eClass-No.: 37010801 Application: Recycling facilities, chemical industry, hospital technology, process water installations, installations with aggressive media Medium: Process water, aggressive media, etc.
ARI-Armaturen
DN: 0.25, 0.125 in
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 70 °C
This allow air flow in only one of the two directions. EAN code: - 8056686166792 Quantity per package: - 5 Minimum order quantity: - 5 Unit of measure: - items Thread type - Cylindrical Threaded port - 1/8"
DN: 8, 6, 4 mm
Pressure: 0.5 bar - 12 bar
Temperature: -20 °C - 60 °C
The VNR L check valve belongs to the LINE ON LINE® family, which means it can be connected to all the other components in series or in parallel. Available in the version for pipe-pipe connection with two push-in fittings, ...
DN: 0.125, 0.25 in
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 70 °C
This allow air flow in only one of the two directions. EAN code: 8024986016567 Quantity per package: 10 Minimum order quantity: 10 Unit of measure: items Threaded port: 1/8"
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 60 °C
Flow rate: 200 l/min - 1,400 l/min
Stop valve with manual override option. • Valve function: piloted non-return function • Screw-in with external thread • Pneumatically piloted • Pilot air connection: M5, G1/8, G1/4, G3/8, QS-4 • ...
DN: 0.88 mm - 1.01 mm
Pressure: 0 psi - 250 psi
The CKV series check valve permits free flow in one direction and no flow (checked) in the opposite direction. This valve is specified in many applications because of its very low cracking pressure (typically ...
Beswick Engineering Co, Inc.
DN: 0.88 mm - 3.2 mm
Pressure: 0 psi - 250 psi
This Ultra Miniature low cracking pressure check valve permits free flow in one direction and no flow (checked) in the opposite direction. This valve is specified in many applications because of its very ...
Beswick Engineering Co, Inc.
DN: 2, 0.125 mm
Pressure: 0 psi - 100 psi
The CKV38 series check valve permits free flow in one direction and no (checked) flow in the opposite direction. The valve is specified in many applications because of its very low cracking pressure ...
Beswick Engineering Co, Inc.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining