- Robotics - Automation - Industrial IT >
- Automation >
- USB I/O >
- CONTEC
CONTEC USB I/O
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
... one USB digital IO device. • Opto isolation for reliable and improved signal quality • Quick USB setup for plug-and-play configuration • Modular capability–when slotted into the ...
... state-of-the-art connectivity from the device to the entire system. Real-time communication is possible via a built-in Ethernet switch or USB. Users can also connect to third-party and legacy devices because the RMA PLUS ...
The CP-RIO6-A is a 4HP Rear I/O interface for a CP6002, CP6003, CP6004, CP6005, CP6006 & CP6016 Compact PCI card complying to Kontron\'s proprietary RTM pinout. This RTM unit will provide USB, Ethernet, ...
Kontron
The CP-RIO6-B is a 4HP Rear I/O interface for a CP6002, CP6003, CP6004, CP6005, CP6006 Compact PCI card complying to Kontron\'s proprietary RTM pinout. This RTM unit will provide USB, Ethernet, serial,DVI, ...
Kontron
Rear I/O module for Kontron 3U CPCI CPU blades Specifications 4HP and 8HP versions available Two Gigabit Ethernet ports Two USB 2.0 ports One VGA analog port Two SATA ports ...
Kontron
RX3i IO is designed for mission critical discrete and process applications. The rack-based IO offers advanced diagnostics and outstanding flexibility, with a wide range of standard and advanced IO. Features ...
... -DIN rail mounted -Built-in Web Server for diagnostic information and firmware update through Ethernet and micro USB port -Support for daisy-chain/line topologies Specifications Network Adapter / ...
... DOs in 20 mS DIN rail mounted Built-in Web Server for diagnostic information and firmware update through Ethernet and micro USB port Support for daisy-chain/line topologies Support for daisy-chain/line topologies Specifications Network ...
The USB-6501 is a portable, bus-powered USB digital I/O device, providing reliable data acquisition and control at a low price. The device provides overvoltage protection its digital ...
NATIONAL INSTRUMENTS
CODESYS 3 Programmable Gateway for the BL20 I/O System Multiprotocol Ethernet Gateway for PROFINET, EtherNet/IP and Modbus TCP Programmable multiprotocol Ethernet gateway for PROFINET, EtherNet/IP and Modbus TCP OPC-Server CODESYS ...
CODESYS 3 Programmable Gateway for the BL67 I/O System Multiprotocol Ethernet Gateway for PROFINET, EtherNet/IP and Modbus TCP CODESYS V3 programmable acc.to IEC 61131-3 Ethernet and USB programming ...
... for I/O status - Supported operating systems: Windows XP/7/8/10 The USB-5800 series are industrial isolated digital input and output USB 3.0 I/O modules. Its ...
... for I/O status - Supported operating systems: Windows XP/7/8/10 The USB-5800 series are industrial isolated digital input and output USB 3.0 I/O modules. Its ...
The Z-D-OUT (hw.1with micro USB port on the front panel) is used to drive N.5 SPST relays from all of the control systems which are able to communicate with the transmission protocol MODBUS RTU through the RS485 serial ...
SENECA | Automation Interfaces
Z-5DI-2DO is a mixed digital module with a Micro USB front programming port, 5 digital inputs (Redd, Proximity, PNP, NPN, contact) selectable via software, nr.5 totalizers @ 32bit with maximum frequency 5 kHz and settable ...
SENECA | Automation Interfaces
... for counting forward or backward with overflow indication for each totalizer. ON-LINE configuration is possible. The use of a USB/RS485 converter with ModBUS RTU protocol is mandatory for PC programming. Power Supply: ...
SENECA | Automation Interfaces
... digital I/O data acquisition devices.The USB-1024 Series adds 24 lines of logic-level digital I/O to any USB port. TheUSB-1024HLS high output current can drive many logic ...
Measurement Computing
Telematic Module 1x CAN Bus(J1939) 1x USB(mini) GF 30% Polyamid 8(12)-32 VDC 1S Li-on Battery -40C +80C IP67 1x IMU Sensor Up to 4 Digital Inputs Up to 1 Frequency Input Up to 4 Analog Inputs Up to 4 Current ...
Makersan
Wireless I/O Module Cat. M1 / Cat. NB2 1x CAN Bus(J1939) 1x USB(mini) GF 30% Polyamid 8(12)-32 VDC 1S Li-on Battery -40C +80C IP67 1x IMU Sensor Up to 4 Digital Inputs Up to 1 Frequency Input Up ...
Makersan
Wireless I/O Module LoRa / LoRaWAN 1x USB(mini) GF 30% Polyamid 5(9)-12 VDC -40C +80C 1S Li-on Battery IP67 Up to 4 Digital Inputs Up to 1 Frequency Input Up to 4 Analog Inputs Up to 4 Current ...
Makersan
Mini PCIe to M.2 Modules Port: 1 M.2 2242 M key/ 1 M.2 2230 E key Interface: PCIe, SATA, USB (based on motherboards input) Form Factor: Mini PCIe for both full and half sizes
CHIP: uPD720201 PORT: 4 x USB 3.2 Gen1 FORM FACTOR: M.2 B-M key 22mm x 80mm INPUT INTERFACE: PCIe
... type, P-NET via Light-Link, RS-485, USB Interface, Dual 100 Mbit Ethernet • Process Automation Controller • Programmable in COPP • P-NET via Light-Link, RS485 and Ethernet • Dual 100 Mbit Ethernet switch • USB ...
PROCES-DATA A/S
The analog input module MV210-101 has 8 analog inputs which can be connected to various types of RTDs, thermocouples, position encoders, and standard signals. To communicate the input data to a controller, an Ethernet port and Modbus ...
akYtec GmbH
The digital input module MV210 has 20 or 32 digital inputs able to connect switch contacts as well as NPN or PNP transistors. To communicate the input data to a controller, an Ethernet port and Modbus TCP are at your disposal. The module ...
akYtec GmbH
The digital input module MV210 has 20 or 32 digital inputs able to connect switch contacts as well as NPN or PNP transistors. To communicate the input data to a controller, an Ethernet port and Modbus TCP are at your disposal. The module ...
akYtec GmbH
... into 2 sets of 2 inputs, which are isolated from one another. RS-485 and USB ports are isolated from input signals and the supply. The module setting can be easily done through USB or one of the RS-485 ...
... output compatible with logic circuits. Configuration is programmable from PC by the GM Pocket Portable Adapter PPC5092 via USB serial line and SWC5090 Configurator software. Each channel enables a load to be controlled ...
... suite of 17 E3 I/O modules offer up to 34 mixed I/O points to meet varying requirements. Add high-density I/O to our award-winning Graphite® HMIs or deploy in remote stand-alone applications. Connectivity: ...
Red Lion's Sixnet series EtherTRAK®-2 Ethernet enabled I/O modules provide simple and secure remote monitoring for deployments in harsh environments. EtherTRAK-2 offers a low cost per I/O point and rugged ...
CEDIO-P 24/24/2 With 48 digital I/O and 2 analog outputs on board it is the controller with highest I/O packing density.
... devices, Programmable PID and ON-OFF control forms, Automatic PID calculation with Self-Tune or Auto-Tune operations, Mini USB-USB2.0 (Software Download/Configuration), Modular Connection (Maximum ...
Compatible with Modbus RTU (RS-485) Master devices, 15x Transistor output, PNP/NPN output selection, Mini USB-USB2.0 (Software Download/Configuration), Modular Connection (Maximum 16 devices), Snap-in ...
TCG140 is a GSM-GPRS remote IO module for remote site monitoring and control over a mobile network. Quad-bands GSM connectivity; Setup via USB (Windows setup program) or SMS; 2 digital ”dry contact” ...
TCG140-4 is a 4G LTE universal IO module for remote monitoring and control over cellular networks. TCG140-4 is a 4G LTE universal IO module. It covers LTE Cat.1 communication with up to 5 Mbit upload. ...
This product is a USB2.0-compliant analog I/O unit that extends the analog I/O function of USB port of PCs. This product features high-precision 16bit analog inputs (32channels), ...
CONTEC
The Syslogic USB mini card is a software-configurable expansion card with four analogue inputs. The analogue I/O module can be configured for four voltage ranges: 0 to 5V, –5 to +5V, 0–10V and –10 to ...
Syslogic GmbH
The IA-2116-U is a tiny and intelligent 16 Relays module, powered and controlled by any USB port. The IA-2116-U provides both NO and NC (Normally Open and Normally Close) channels, while the relays common line is shared ...
Intelligent-Appliance
... by adding Mect MPNC030 and MPNC035 series modules for analog signals and MPNC020 for digital signals. The analog and digital I/O communicate between each other by internal bus on DIN rail. The VNC allows to create ...
... signals. Additionally, being a standard USB device, this I/O module can also be used in conjunction with any other PC. The ideal solution to bring automotive signals into a standard (MiniITX) PC system. ...
... SPECIFICATION • Connector : 1 × 50 Ω SMA (Center PIN: SMA Female) • SIM Type: Micro SIM * • Port Interface: 1 × Micro USB • Input Voltage : 5-24V DC (Standard : 12V/0.5A)* • Dimensions: 79 x 76 x 24 mm • Mounting ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining