- Power Transmission - Mechanical components >
- Bearing and Linear Guide >
- One-way clutch with internal bearings >
- Cross & Morse
Cross & Morse one-way clutches with internal bearings
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Torque: 29 Nm - 260 Nm
Diameter: 15 mm - 40 mm
Rotational speed: 900 rpm - 3,600 rpm
Bearing (6200s) with a built-in cam clutch Bearing (6200s) with a built-in cam clutch. Depending on the operating atmosphere an oil seal type is also available. Can ...
Tsubakimoto Chain
Torque: 70 Nm - 2,300 Nm
Diameter: 25 mm - 110 mm
Rotational speed: 160 rpm - 600 rpm
... for low to mid-speed and middle load applications. Features ・Uses a cam and roller structure where rollers serve as a bearing, allowing for a more compact design. ・Pre-lubricated with grease. ・No lubrication maintenance ...
Tsubakimoto Chain
Torque: 105 Nm - 366,000 Nm
Diameter: 20 mm - 320 mm
Rotational speed: 165 rpm - 1,300 rpm
... powertransmission,the cam used in BR-HT Cam Clutch offers a unique cross section that provides positive mechanical engagement only when needed. Otherwise, the Cam Clutch rotates freely with absolutely ...
Tsubakimoto Chain
Torque: 110 Nm - 31,000 Nm
Diameter: 20 mm - 155 mm
Rotational speed: 96 rad.min-1 - 5,000 rad.min-1
... face with sprag lift-off X Application as Backstop Overrunning Clutch For application as backstop in installations with high speeds in freewheeling operation. For ...
RINGSPANN
Torque: 220 Nm - 25,000 Nm
Diameter: 20 mm - 155 mm
Rotational speed: 630 rad.min-1 - 2,600 rad.min-1
... with sprags, available in three types Application as Backstop Overrunning Clutch Indexing Freewheel Features Integrated Freewheels ...
RINGSPANN
Torque: 45 Nm - 160,000 Nm
Diameter: 12 mm - 300 mm
Rotational speed: 400 rad.min-1 - 5,500 rad.min-1
... face with sprags, available in four types Application as Backstop Overrunning Clutch Indexing Freewheel Features Complete Freewheels FB are ...
RINGSPANN
Torque: 373 Nm - 33,900 Nm
Diameter: 15 mm - 160 mm
Rotational speed: 0 rpm - 3,600 rpm
... each face to enable the fitting of gears, sprockets, pulleys, etc. Four types of clutch are offered MG Series - Standard clutch for general overrunning, backstop and index applications, ...
Cross & Morse
Torque: 54 Nm - 2,440 Nm
Diameter: 50.8 mm - 114.3 mm
Rotational speed: 300 rpm - 1,800 rpm
... groove ball bearing with snap ring in outer race locating in recess dia. D. The outer race of the clutch is tapped for attaching sprocket, gear or ratchet arm Intended primarily for indexing applications, ...
Cross & Morse
Torque: 53 Nm - 1,695 Nm
Diameter: 16.5 mm - 56 mm
Rotational speed: 1,800, 2,500, 2,000 rpm
... outside diameter is the same as 62 series ball bearing enabling simple fitting beyond the bearing on intermediate or output shafts of gearboxes. Bore sizes range from 16.5 mm to 56 mm for operation alongside ...
Cross & Morse
Suitable for all small machine applications where compact dimensions are required Grease lubricated and sealed for life, offering reliability with maintenance-free duty Dimensional interchangeability with other leading manufacturers ...
RENOLD
Torque: 210 Nm - 27,500 Nm
Diameter: 0.5 in - 15 in
Rotational speed: 350 rpm - 3,600 rpm
The FR series by Ringspann is is full face one way clutch used for bolting the face in inch dimension with sprags. This is a sealed sprag freewheel in inch dimension ...
SIAM RINGSPANN
Torque: 55 Nm - 68,000 Nm
Diameter: 12 mm - 150 mm
... Features Complete Freewheel FGR R A1A2 with mounting flange are sealed roller freewheels with ball bearings. They are oil lubricated. The freewheels FGR R A1A2 ...
SIAM RINGSPANN
Torque: 230 Nm - 2,500 Nm
Diameter: 20 mm - 85 mm
Rotational speed: 90 rpm - 500 rpm
... with short delivery times. Application as - Backstop - Indexing Freewheel For application as backstop in installations with low speeds in freewheeling operation. For application ...
SIAM RINGSPANN
Diameter: 70 mm
... it to be used even in contact with delicate surfaces (avoids damage, scratches, marks) Equipped with two 2RS watertight bearings which guarantee excellent smoothness and stability. Available with flat (orange) and ...
Diameter: 34, 45, 50 mm
... does not stain or damage the product; - high stiffness combined to high mechanical/impact resistance thank to co-molded bearing; - reduced friction with excellent performance and ease of rolling; - the conical roller ...
One-way bearing One-way roller bearing with clamping contour exterior Integrative ball bearing as floating bearing ...
Torque: 0.9 Nm
... (8 pound inch capacity), economical, fully journaled clutch, for use when axial space is at a minimum, but long life is paramount. The Polyclutch Shell-Pak is a fully automatic over-running clutch that ...
Torque: 94 Nm - 543 Nm
Diameter: 15 mm - 60 mm
Rotational speed: 1,000 rpm - 2,000 rpm
... pre-lubricated with sealing rings. All GMN complete freewheel clutch units can be used as indexing clutches, backstops or as overrunning clutches. The freewheel clutches ...
GMN
Torque: 176 Nm - 588 Nm
Diameter: 15 mm - 45 mm
Rotational speed: 1,000 rpm - 1,700 rpm
... pre-lubricated with sealing rings. All GMN complete freewheel clutch units can be used as indexing clutches, backstops or as overrunning clutches. The freewheel clutches ...
GMN
Torque: 60 Nm - 543 Nm
Diameter: 10 mm - 60 mm
Rotational speed: 2,500 rpm - 10,100 rpm
GMN complete freewheel clutch units are particularly suited for high torque requirements. The FPD, FND, RA, FP and FN series are characterized by an integrated ball bearing and an additional ...
GMN
Torque: 0.5 Nm - 2.8 Nm
Rotational speed: 4,500 rpm - 7,000 rpm
... D-Series, but which are installed in your housing. The clutch has near zero backlash & allows high overrunning speeds, making them ideal for machines requiring overrunning, backstopping, freewheeling or one-way ...
Torque: 55, 93, 130 Nm
Diameter: 52, 62, 47 mm
Rotational speed: 4,200, 6,000, 5,200 rpm
The CKN series is a freewheel incorporating a 62.. series bearing, self-centring, grease-lubricated and comes with water protection This model is equipped with a keyway on the inner race and should be ...
C.T.S.
Torque: 20 Nm - 35,000 Nm
Diameter: 8 mm - 130 mm
Rotational speed: 250 rpm - 3,600 rpm
The GF Series freewheels are self centering. From size 8 to size 20, centering is steel on steel, while from size 25 to 130, centering is ensured by 2 160.. series bearings. Torque forces are transmitted ...
C.T.S.
Torque: 55 Nm - 70,000 Nm
Diameter: 12 mm - 150 mm
Rotational speed: 200 rpm - 5,600 rpm
... be applied to the freewheels before operation, following instructions given on page 12. Each freewheel is supplied with two paper gaskets that must be inserted between the outer race and the flanges. ...
C.T.S.
Torque: 0.08 Nm - 0.98 Nm
... ball bearing technology, we were able to develop and design these one-way clutches with features such as a built-in clutch element integrated into a molded design. We can apply this technology ...
TOK Europe GmbH
Torque: 0 Nm - 156,000 Nm
Diameter: 180 mm - 300 mm
Rotational speed: 70 rpm - 1,300 rpm
The RSCI 20-130 series by Stieber is a Backstop clutch which comes with an inner race rotating. This tool is ideal for freewheeling. The bearing must be provided in an operation to ensure ...
STIEBER
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining