DELO single-component adhesives
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
... humidity - Resists high temperature, shock and vibration Master Bond MasterSil 773 is an easy to use, solvent-free, one component, exceptionally low viscosity silicone elastomer based conformal coating which provides ...
Master Bond
Key Features • Exceptionally low viscosity • Superior thermal stability • Very little shrinkage upon cure • Cationic curing system Master Bond UV15LV is a high strength, low viscosity, epoxy based UV curable system for bonding, ...
Master Bond
Key Features • Good physical strength properties • Low shrinkage upon curing • Cationic curing system, no oxygen inhibition • Passes NASA low outgassing tests Master Bond UV16 is a low viscosity, high strength epoxy based UV curable ...
Master Bond
Working temperature: 5 °C - 40 °C
High-strength, 1-component silicone structural glazing adhesive, CE-marked Sikasil® SG-20 is a 1-component, neutral-curing structural glazing silicone adhesive, which ...
SIKA INDUSTRY
... universal glue stick for home and office. Its triangular shape allows precise glueing of lines, points and corners. Suitable for paper, cardboard and photos Easy to spread Grease-free application The tesa Easy ...
Tesa
Retaining Compound - high strength, no labelling. LOCTITE 6300 is designed for the bonding of cylindrical fitting parts. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening ...
Henkel LOCTITE
Gasketing Product - no labelling. Ideal for use on rigid metal flanges. LOCTITE 5800 seals close-fitting joints between rigid metal faces and flanges. It cures when confined in the absence of air between close-fitting metal surfaces. ...
Henkel LOCTITE
Gap fill: 0.15 mm
Working temperature: -40 °C - 120 °C
LOCTITE 401 is a general purpose, fast curing, instant adhesive that is ideal for use on porous substrates. LOCTITE 401 is a fast curing instant adhesive designed for the assembly of difficult-to-bond ...
Henkel LOCTITE
Working temperature: -55 °C - 120 °C
TE Internal Description: S1048-TAPE-1X100-FT Alias #: 9-1196924-2 Specification : RK6626, RT-1050/3 Packaging Method : Roll
TE CONNECTIVITY
Application: coating of facematerial / label stock Adhesive coating from 3μm up to 500μm thicknesses Coating width up to 1500mm Temperature resistance from -40°C up to +250°C Low emission Individual adhesive ...
... aggressive synthetic rubber pressure sensitive adhesive is particularly suitable for hard, low tolerance mounting of printing plaes in flexographic printing. Excellent tolerance compliance. The adhesive ...
... displays • General industrial Hot melt adhesives (PDF, 1.68 Mb), also known as glue sticks, are liquefied thermoplastic adhesives available in both low and high-temperature versions. ...
3M
Working temperature: 5 °C - 35 °C
Pattex 100% Repair Gel is a gel structured adhesive for all your small repairs in and around the house. No more sagging in vertical applications while gap filling. No more slipping parts and dripping during the application. Pattex ...
PATTEX
... happens when an anaerobic sealant (adhesive) is sealed between a nut and a bolt on a threaded metal assembly or between two closely fitted metal cylindrical parts. With active metal ions and no oxygen, anaerobic adhesives ...
Permabond
Cyanoacrylate adhesives for super-quick bonding of small parts Rely on DELO's instant glue when bonding tiny parts: Our one-component industry-strength instant adhesive ...
DELO Industrial Adhesives
... seconds for short cycle times in production • UV adhesive suitable for opaque materials • Suitable for a wide range of temperatures • Quick and reliable UV curing Please note: We supply hightech adhesives ...
DELO Industrial Adhesives
... it comes to certain applications, it is impossible to cure adhesives simply by exposing them to light. In addition, the dual curing mechanisms are beneficial, especially when bonding components with shadowed ...
DELO Industrial Adhesives
... 2000 Adhesive Core Range. Whether you need to assemble high-performance products, or make repairs on the fly in tough conditions, these adhesives provide you with a safe, straightforward and streamlined ...
Huntsman Advanced Materials
Polyurethane (PU) thermal insulation glue has advantages of extensive adaptability, strong thermal insulation, superior resisting strength, etc., which are able to meet the strict requirement of outdoor temperature - ...
Working temperature: -55 °C - 150 °C
Shear strength: 11 N
... DeepMaterial multi-purpose UV curing adhesive is a one-component solvent-free product, which can be cured in a few seconds under UV or visible light. It has a fast curing speed, high bonding strength, ...
Shenzhen DeepMaterial Technologies Co., Ltd
Working temperature: -55 °C - 150 °C
Shear strength: 8.6 N
... DeepMaterial multi-purpose UV curing adhesive is a one-component solvent-free product, which can be cured in a few seconds under UV or visible light. It has a fast curing speed, high bonding strength, ...
Shenzhen DeepMaterial Technologies Co., Ltd
Working temperature: -55 °C - 150 °C
Shear strength: 16.8 N
... DeepMaterial multi-purpose UV curing adhesive is a one-component solvent-free product, which can be cured in a few seconds under UV or visible light. It has a fast curing speed, high bonding strength, ...
Shenzhen DeepMaterial Technologies Co., Ltd
Working temperature: -60 °C - 340 °C
Kohesi Bond KB 1427 HT is a marvelous single component epoxy system for bonding, coating, sealing and casting applications. Although it requires a minimum temperature of 150°C for curing, it can achieve ...
Kohesi Bond
Working temperature: -50 °C - 200 °C
Kohesi Bond KB 1427 HT-3 is an exclusive one component epoxy system that can cure completely in 2 – 3 minutes at 150°C. Although it requires a minimum temperature of 120°C for curing, it cures equally fast (3 – 5 minutes) ...
Kohesi Bond
Working temperature: -50 °C - 200 °C
Kohesi Bond KB 1613 HT is a true single component system that requires no mixing and cures hard at elevated temperatures. Although it requires a minimum temperature of 120°C for curing (at which it cures ...
Kohesi Bond
The Hot-melt Polymer Adhesive, manufactured by Reka Klebetechnik GmbH & Co. KG, is a series of hot-melt adhesives which includes sticks, granulates as well as pillows.
Gasketing anaerobic adhesive seals flat mating surfaces and joins flanges on pumps, gearboxes and differential housings. It replaces preformed gaskets and allows contact between metal parts forming a seal which is not ...
Loxeal
Working temperature: -50 °C - 150 °C
Packaging: 30, 500 ml
Cyanoacrylate adhesive for special requirements | high viscosity | longer cure time | odourless and little to no blooming It is less susceptible to moisture effects after curing. WEICON Contact VA 1403 is suited for ...
WEICON
Working temperature: 10 °C - 30 °C
... well to circuit boards and electronic components. The casting compound can be used in electronic engineering for protecting electronic components, semiconductors and building components. ...
WEICON
Working temperature: -40 °C - 90 °C
... sandable, weather-resistant, resistant to UV rays and is free of silicone, isocyanate and solvents. This adhesive and sealant is a strong 2-component system based on hybrid polymer, which enables full-surface ...
WEICON
Working temperature: 110 °C
... your jointing components, both in handcraft as well as in the industrial field. Compared with the customary competition, COSMO PU-100.110 e.g. offers the following properties: - very quick full hardening, also of ...
Weiss Chemie
COSMO PU-100.250 is a particularly quick universal assembly adhesive for reliable and long-lasting assemblies in the building trade as well as for industrial applications. Also at a low processing temperature from 0°C ...
Weiss Chemie
... absorption e.g. in cap timber, absorbent materials • thin transparent adhesive joint • high resistance to weather conditions and to heat up to +110°C • thermosetting, impact-resistant adhesive joint • ...
Weiss Chemie
Working temperature: 15 °C - 25 °C
... versatile toughened, high performance adhesive system that is suitable for bonding a wide range of materials. Spabond™ 435 has been developed from the proven performance of Spabond™ 335, whilst sharing the same hardener ...
Gurit
... FIX-O-FLEX® group of adhesive and sealing materials. When combined with moisture, they harden to create an elastic output. They are made with silyl modified polymers (SMP). They provide several advantages when compared ...
Packaging: 50 ml
... strength anaerobic adhesive • Direct sealing Benefits: • Colour: white • Allows adjustments and repositionings during 30 minutes • Oil, gas, water, vibrations, shock, temperature and corrosion resistant • ...
... Permanent sealing • High strength anaerobic adhesive Benefits: • Colour: orange • Excellent filling capacity • Oil, gas, water, vibrations, shock, temperature and corrosion resistant • One-component ...
Easy to use, can be applied straight from the tub with a 1.6 v-notched trowel Suitable for internal use on absorbent substrates in areas with medium pedestrian traffic. Delivers a fast and clean installation project
... especially for inert materials (e.g. stainless steel or aluminium) or large gaps Accelerates the hardening of STALOC anaerobic adhesives (threadlockers, retaining compounds, surface sealants and pipe thread sealants)
STALOC
Working temperature: 120 °C
... : Guangzhou, Shenzhen or Hongkong Lead Time: 20 days Headliner Spray Adhesive is a spray adhesive designed specifically for repairing automotive interiors. This spray adhesive can ...
Dongguan Dayang Aerosol Chemical Technology Co., Ltd.
Working temperature: 15 °C - 35 °C
... effect. Evenly spray the glue for a distance of 15-30 cm to the adhesive surface. After using please keep the can down, spray about 2 to 3 seconds to avoid nozzle clogged, the best ...
Dongguan Dayang Aerosol Chemical Technology Co., Ltd.
Working temperature: 15 °C - 35 °C
... Guangzhou or Hong Kong Lead Time:20 days Sprayidea Dy-100 Repositionable Temporary Tacky Spray Adhesive is temporary, repositionable, fabric adhesive used to temporarily bond fabric. Odorless, colorless, ...
Dongguan Dayang Aerosol Chemical Technology Co., Ltd.
... build-up of internal strength on cooling. They are physically hardening thermoplastic adhesives which are already present in their final chemical state. Modern hot melt adhesives from Jowat impress with ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining