- Environment - Health - Safety >
- Air Treatment and Noise Management >
- Extraction fan >
- Dresser-Rand
Dresser-Rand extraction fans
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Air flow: 9.8 ft³/min - 293 ft³/min
... input fan type, offered in 3 product classes and 5 outer frame dimensions. Enclosure covers without fans are also available. Installation and maintenance is easy utilizing a square mounting hole. What ...
Air flow: 14 m³/h - 700 m³/h
Noise level: 27 dB - 75 dB
The 7F Series of fans and filter fans for cabinets and electrical panel are products to ventilate and safeguard against high temperatures. The range includes the following features (according to Type): ...
Rotational speed: 2,800 rpm
Noise level: 10 dB
Don't give hearing damage a chance! The Sound Absorbing Fan (SAF) reduces noise by more than 10 dB, reducing the risk of hearing damage. The exhaust fans from the SAF series are equipped with sound insulation ...
PLYMOVENT
Air flow: 2,400 m³/h
... Flex, T-Flex extraction arms FAN-28 is a wall-mounted extraction fan FAN-28 is especially designed to fit the large diameter (200mm) arms in our ...
PLYMOVENT
Air flow: 3,000 m³/h
... extention crane and stationary filter The FAN 42 is an extraction fan used for small welding fume extraction systems The FAN 42 is a wall-mounted ...
PLYMOVENT
Air flow: 4.6 m³/h
Rotational speed: 12,000 rpm
Noise level: 23 dB
Axial compact fans are suitable for high air performance with moderate pressure build-up. The flow of air through the fan blades is parallel to the rotation axis. ebm-papst offers a wide selection of ...
ebm-papst
Air flow: 500 m³/h - 1,870 m³/h
Noise level: 52 dB - 63 dB
... radial fans on KryosROOF provide high flow rates and heads to ensure the correct airflow within the cabinet. In addition, there is a high efficiency version with EC fans and an active control probe, ...
Air flow: 1,000 m³/h - 35,000 m³/h
The Extractair® is a centrifugal fan that allows the evacuation of polluted air to the workstations. Installed on the roof and connected to piping networks, it is used to: - Cleaning and air renewal; - Cooling ...
NEU-JKF
Air flow: 1,000 m³/h - 35,000 m³/h
... and renewing, - cooling of hot environments, - acceleration of drying and evaporation, - extraction of vapours and steams. The Nylair® fans are axial fans covering a wide flow range ...
NEU-JKF
Air flow: 5,600 m³/h - 34,300 m³/h
... of centrifugal fans EXTRACTAIR® C are suited to various applications. Connected to a piping network they allow the polluted air extraction on workstations such as: - Suction of welding ...
NEU-JKF
Air flow: 0 m³/h - 1,000 m³/h
Fans are used in combination with duct on KEMPER welding smoke exhaust arms, telescopic arms and suction hoses. They are used for venting or ventilation wherever filtering the air is not important. Due ...
KEMPER
Air flow: 0 m³/h - 3,000 m³/h
Fans are used in combination with duct on KEMPER welding smoke exhaust arms, telescopic arms and suction hoses. They are used for venting or ventilation wherever filtering the air is not important. Due ...
KEMPER
Air flow: 2,000 m³/h - 4,000 m³/h
... . Applications For extraction tables, extraction hoods and extraction arms High levels of smoke and particles Non-stop operation Benefits Low investment costs because extraction ...
KEMPER
Air flow: 700 ft³/min
Nederman portable Fans are simple and powerful ventilation units for service, repairs and other temporary work. Ideal as an extractor for welding fumes, steam, dust or for providing fresh air during work ...
BAF - Fans For Extraction Arm Bomaksan branded BAF model fans are specially designed to work with extraction arms. Bomaksan BAF series fans are preferred ...
Air flow: 6,600 m³/h
Rotational speed: 2,890 rpm - 2,940 rpm
FUMEX FTE is a range of radial fans for use at high concentrations of dust-laden air. Fan housings and impellers are made from heavy-duty steel sheet for industrial use. The welded impeller has straight ...
Fumex
Air flow: 15,000 m³/h
Rotational speed: 2,755 rpm - 2,950 rpm
Noise level: 70 dB - 94 dB
... has curved blades and is made from welded galvanised sheet metal. The fan complies with the ErP Directive and is optimised for use in conjunction with the Fumex fume extraction and automatic control ...
Fumex
Air flow: 600 m³/h
Rotational speed: 2,800 rpm
... airflow of up to 600 m³/h (165 l/s). The fan is optimised for use together with Fumex systems for fume extraction and automatic control. C 600 is available in both 1-phase and 3-phase versions. The ...
Fumex
Air flow: 580,000 m³/h
... to 2,700 Pa. Suction on both sides. With coupling or belt drive - frequency converter operation also possible. The housing and impellers with blades bent backwards are made of steel or stainless steel. Variable connection ...
Elektror airsystems
Air flow: 33,600 m³/h
... rooms Fan motor situated away from the main air flow Can be connected to suction as well as distribution ducts Technical data TFV 900: Free discharge air volume: 33,600 m³/h Air ...
Air flow: 0 m³/h - 33 m³/h
Filter Fan FPO size 1 (92 x 92 mm) for climatising control cabinets and enclosures. Configuration: FPO – airflow direction: OUT (version: suction). Optimal filter fan for control cabinets: the Filter ...
STEGO
Air flow: 0 m³/h - 117 m³/h
Filter Fan FPO size 2 (124 x 124 mm) for climatising control cabinets and enclosures. Configuration: FPO – airflow direction: OUT (version: suction). Optimal filter fan for control cabinets: the Filter ...
STEGO
Air flow: 0 m³/h - 125 m³/h
Filter Fan FPO size 2 (124 x 124 mm) for climatising control cabinets and enclosures. Configuration: FPO – airflow direction: OUT (version: suction). Optimal filter fan for control cabinets: the Filter ...
STEGO
Air flow: 90, 168, 233 m³/h
Diameter: 100, 150 mm
Rotational speed: 2,120, 2,200, 2,280 rpm
Autonomous and intelligent extractor fan for the bathroom. It automatically adjusts its performance to the ambient conditions and ventilation requirements via a presence detection sensor and a humidity ...
Soler & Palau
Air flow: 300 m³/h - 2,070 m³/h
Diameter: 100 mm - 400 mm
Rotational speed: 860 rpm - 2,860 rpm
In-line centrifugal duct fans suitable for wide range of general residential, commercial and industrial exhaust or supply ventilation applications. Circular in-line duct fans from 100 to 400 mm diameter. Models ...
Soler & Palau
Air flow: 87 m³/h
Diameter: 99 mm
Rotational speed: 2,691 rpm
... In usual extract fans the vibrations are transmitted to the surrounding areas while in SILENT extractor fans the vibrations are absorbed by the Silent Blocks. Interchangeable bars ...
Soler & Palau
NESTRO fans are the heart of every extraction system - proven, efficient and durable. If the fan is installed on the raw gas side, it blows into the filter system and is referred to as ...
NESTRO Lufttechnik GmbH
NESTRO transport fans transport the material to be filtered, e.g. in long pipelines or in the event of high volume flow requirements. They support/relieve the burden on the extraction fans.
NESTRO Lufttechnik GmbH
NESTRO fans are the heart of every extraction system - proven, efficient and durable. If the fan is installed on the clean gas side, it sucks air through the filter system and is referred ...
NESTRO Lufttechnik GmbH
Air flow: 25 m³/h - 29 m³/h
Noise level: 33 dB
same design as the PF series filterfans snap fastener developed and patented by Pfannenberg door mounting without screws in accordance with VDE 0113 (EN 60204) simple filter mat exchange during operation with integrated foam seal ...
PFANNENBERG
Air flow: 55 m³/h
The filter fans are required to ventilate your electrical and electronic equipment and protect them from dirt and dust thanks to its integrated filter. They are easily mounted on the side wall of the cabinet. It is ...
EURODIFROID
Air flow: 110 m³/h
The filter fans are required to ventilate your electrical and electronic equipment and protect them from dirt and dust thanks to its integrated filter. They are easily mounted on the side wall of the cabinet. It is ...
EURODIFROID
Air flow: 120 m³/h
The filter fans are required to ventilate your electrical and electronic equipment and protect them from dirt and dust thanks to its integrated filter. They are easily mounted on the side wall of the cabinet. It is ...
EURODIFROID
Air flow: 2,700, 3,850 m³/h
Portable extraction fan for welding fumes The portable FACILE extraction fan is particularly suited to protecting the operator from fumes and particulate when working ...
AERSERVICE EQUIPMENTS SRL
Air flow: 100 m³/h - 19,000 m³/h
Centrifugal fans with forward curved blades in galvanised sheet metal Extraction of air which is clean or with a low volume of particulates, exhaust gases, welding fumes, etc. - Structure: The structure ...
AERSERVICE EQUIPMENTS SRL
Centrifugal fan with forward curved blades in galvanised sheet metal Extraction of air with a low volumes of particulate, exhaust gases, welding fumes, etc. - Structure: The structure of the extraction ...
AERSERVICE EQUIPMENTS SRL
Air flow: 10,102 m³/h - 77,340 m³/h
Diameter: 26 in - 69 in
Noise level: 62 dB - 74 dB
Exhaust Fans with Steel blades & Galvanized Housing Move and refresh the stagnant air in your tunnel, greenhouse or commercial warehouse to create a healthy and more productive environment. Our exhaust fans ...
GIGOLA & RICCARDI S.P.A.
Air flow: 26,600 m³/h - 53,600 m³/h
Diameter: 55, 51 in
Noise level: 77, 76 dB
... structure helps to keep dirt and condensation off the fan. In order to achieve a better balance our fans are equipped with two bearings, instead of one. The two bearings are separated by a distantial. The ...
GIGOLA & RICCARDI S.P.A.
Air flow: 21,356 m³/h - 35,850 m³/h
Diameter: 51 in
Noise level: 75, 72 dB
High Pressure Fan with steel blades & Galvanized Housing Move and refresh the stagnant air in your tunnel, greenhouse or commercial warehouse to create a healthy and more productive environment. Our exhaust fans ...
GIGOLA & RICCARDI S.P.A.
Air flow: 1,520 m³/h - 52,255 m³/h
Rotational speed: 455 rpm - 2,940 rpm
Noise level: 31 dB - 82 dB
400 ºC/2h and 300 ºC/2h axial exhaust fan units with built-in acoustic attenuator Extraction units with axial fans to work immersed in fire risk areas. Fan: • ...
SODECA
... belt-driven centrifugal fans to operate outside the fire risk zone fitted with a backward curved impeller fitted with electric motors and a standardised set of pulleys, belts and guards in accordance with standard ISO-13857. Fan: • ...
SODECA
Air flow: 1,670 m³/h - 12,520 m³/h
Rotational speed: 940 rpm - 1,465 rpm
Noise level: 53 dB - 83 dB
400 ºC/2h centrifugal extractor fans, with forward curved impeller 400 ºC/2h centrifugal single inlet extractor fans for outdoor operation in fire risk zones. Fan: • ...
SODECA
Air flow: 147.5 m³/h - 925 m³/h
Rotational speed: 2,760 rpm - 2,910 rpm
Centrifugal fan with forward curved blades or open blades for low flow rates and medium and high heads. Suitable for exhaust gas, flue gas and granular material suction. Direct-coupled execution only. Maximum air temperature: ...
CORAL PROMINDUS SA
Ducted helical fan with nylon-glass impeller and alternatively cast aluminum impeller. Suitable for moving large volumes of air at low pressure even in the presence of dust or fumes. Maximum air temperature: 60°C. Special ...
CORAL PROMINDUS SA
The ET extraction tower is normally used to draw in large volumes of air with low pressures. Its small size and light weight facilitate installation directly on roofs, either free suction or connected ...
CORAL PROMINDUS SA
Air flow: 250 m³/h - 3,000 m³/h
Centrifugal exhaust-fans are intended particularly for source - capture and are completely adaptable to the EP Series arm line or with the EG and EK arm series by utilizing an adapter flange. These fans ...
Air flow: 250 m³/h - 3,000 m³/h
The J series of exhaust fans is especially engineered for use in ATEX categorized zones. The fans are manufactured in diverse versions, each optimized for use in zones with dust-prone environs or dust ...
Air flow: 100 m³/h - 13,000 m³/h
Metal sheet steel fan complete with inlet and outlet flanges
Air flow: 9,600 m³/h - 52,500 m³/h
Diameter: 638 mm - 1,385 mm
Rotational speed: 393 rpm - 942 rpm
K air extractors are available in several versions, with diameters ranging from 26" to 56", direct-drive, belt-driven or cone-driven. Noise levels are low and efficiency is high. The body is available in galvanized or ...
Air flow: 165, 2,500, 3,000, 3,500, 4,000 m³/h
Diameter: 160 mm
Noise level: 72, 70, 74, 75 dB
The mobile exhaust fan convinces by the very flexible application due to its low construction and the low weight. In connection to a suction hose, the exhaust fan is appropriate to the ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining