- Hydraulics - Pneumatics >
- Compressor >
- Aluminum blower >
- ebm
Ebm aluminum blowers
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Flow: 170 m³/h - 190 m³/h
Nominal power: 30, 32 W
... solution for when the heat is on ebm‑papst hot-air blowers rely on tried and proven shaded-pole motors. The hot air impeller is either made from hot-dip aluminized steel, stainless steel or die cast ...
Flow: 0 m³/h - 1,234 m³/h
Operating pressure: 0 mbar - 450 mbar
Nominal power: 0.37 kW - 22 kW
The side channel single-impeller and single-stage (MS) blowers represent one of the main FPZ product ranges. A point of reference in many fields of application, the MS blowers are characterized by a compact ...
FPZ SpA
Flow: 0 m³/h - 2,382 m³/h
Operating pressure: 0 mbar - 375 mbar
Nominal power: 3 kW - 26 kW
... single stage blowers are equivalent to 2 MS blowers in parallel with a single electric motor. This allows an increase in the fluid volume, reaching flow rates up to 2400m3/h-60hz. Characterized by a high ...
FPZ SpA
Flow: 0 m³/h - 570 m³/h
Operating pressure: 0 mbar - 650 mbar
Nominal power: 3 kW - 17 kW
... side channel blower can cover a wide range of flow/pressure combinations. The maximum flow rate that can be treated is 2.400 m3/h while the relative pressure range goes from -450 mbar (vacuum) to +650 mbar (pressure). ...
FPZ SpA
Nominal power: 120 W
The HP-N-Ex ionizing air blower consists of a motor and a fan. The ambient air is drawn on one side and blown off along an anti-static bar. The effective ionizing width is 500 mm. This ionisation blower ...
Flow: 75 m³/h
Operating pressure: 12.09 Pa
... A-PH high pressure blowers. They provide a flow rate up to 75 m³/min and a total pressure difference 12,090 Pa. The minimal wear, direct drive works with offset Frequency Converter (FU) or mounted (FUK). The housing consists ...
Flow: 0 m³/h - 50 m³/h
Operating pressure: 0 mbar - 75 mbar
... The construction of the side channel blowers is based on the lateral ducts principle. The blowers can operate either as exhauster or compressor fans and are designed for continuous service. Full die-cast ...
Ivaco
Flow: 297 m³/h
Operating pressure: 99 mbar
Weight: 2.2 kg
... non-sparking materials. Blower housing assembly constructed of die cast aluminum. Impeller constructed from hardened aluminum. Rubber isolation mounts built into the blower ...
AMETEK Dynamic Fluid Solutions
Flow: 2,887 m³/h - 18,179 m³/h
Sound level: 94, 100, 84, 88, 104 dB
Weight: 50, 59, 93, 250, 304 kg
... -, 5-, 15-, and 30-HP motors producing up to 10,700 cfm (18,179 m3/hr) • One-piece, cast aluminum, spark-resistant, abrasion-resistant, dynamically balanced fan wheel • Backward curved airfoil-shaped ...
Flow: 0 m³/h - 530 m³/h
Operating pressure: 0 mbar - 320 mbar
Nominal power: 5.5 kW
... Anti-corrosion blowers are mainly used in environment with corrosive gas or particles. Advantages: 1. Avoid corrosive gas damaged the blower; 2. Ensure the blower can continuously ...
Dongguan Foersheng Intelligent M&E Co,.Ltd.
Flow: 39, 46 m³/h
Operating pressure: 52, 71 mbar
Nominal power: 0.09 kW
... which extends bearing life and offers superior resistance to washout, rust, and corrosion. Aluminum blower housing, impeller, and cover Aluminum blower housing, ...
GAST
Operating pressure: 140 mbar - 430 mbar
Nominal power: 0.5 kW - 22 kW
... . Other advantages of side channel ventilators with a bare shaft, include: lightweight due to use of aluminium corrosion-proof aluminium friction-free operation, thus no wear to the ventilator ...
Flow: 5 m³/min - 53 m³/min
Operating pressure: 700 Pa - 4,400 Pa
Nominal power: 0.2 kW - 3.7 kW
... waste apparatus, hot air blowers, dryer equipment, incinerators, food and beverage industries, cooling machines and grain elevators. It can produce high pressure and maximum flow rate. It is constructed with aluminum ...
Chuan-Fan Electric
Flow: 42,475.2 m³/h
Operating pressure: 0 psi - 20 psi
... multistage fabricated centrifugal blowers are crucial pieces of equipment that organizations count on to perform well from the moment they’re installed. When you choose Howden over other multistage fabricated centrifugal ...
Flow: 350 l/min - 407 l/min
Operating pressure: 4,200 Pa - 5,019 Pa
Nominal power: 24 W - 33.1 W
Product Parameter: IN freeblowing: 1’250/1’600mA n freeblowing: 31’200/34’500rpm V freeblowing: 355/407 l/min P static: 4’200/5’019Pa PN work. point: 24.0/33.1W VCC Nominal Voltage:24V Features: * Dimensions: 61.4 x 61.4 x 50.8 ...
Boreasa Technologies Co., Ltd
Flow: 55 m³/h - 1,022 m³/h
Operating pressure: 125 mbar - 500 mbar
FPZ MS blowers have high quality finish aluminum case. Blower air flow is 55-1022 m³/h and pressure 125-500 mbar. Vacuum air flow is 55-1022 m³/h and pressure 82-350 mbar. FPEZ MS ...
Eurovac / suomen imurikeskus Oy
Flow: 30 m³/h - 1,000 m³/h
Operating pressure: 6,000 Pa - 65,000 Pa
Nominal power: 0.12 kW - 18.5 kW
Air blower The advantages of XGB blowers: 1. 100% oil free, Insulation class is F, Protection class is IP55. 2. Dual frequency 50HZ and 60HZ are available 3. Made of die cast aluminum ...
Hengsu Holdings Co,.Ltd.
Flow: 600 m³/h - 6,000 m³/h
Operating pressure: 290 mbar
Nominal power: 22 kW - 37 kW
... Power(kw) Airflow(m/h) Pressure(mbar) Vacuum(mbar) Weight(kg) Stage HANK-350 22-37 600-6000 290 270 34-486 Single Centrifugal blower features: 1.low noise, low maintenance, reliable operation, strong and durable. 2.reliable ...
Dereike
Flow: 1,080 m³/h - 3,000 m³/h
Operating pressure: 17, 25, 40 mbar
Nominal power: 0.75 kW - 5.5 kW
... non-stop operation. Blower impeller - The impeller of TB fan is double plate and clip type. It is assembled by light aluminum cutting. The blade is made of fluid arc surface, which ...
Flow: 200 ft³/min - 2,500 ft³/min
Model FPB is a pressure blower that uses a radial aluminum blade wheel providing efficient operation and spark resistant construction. Housing design is fully rotatable and constructed of steel with a ...
Flow: 136 m³/h - 6,000 m³/h
Operating pressure: 17 mbar - 150 mbar
... housing Aluminum impellers that are balanced statically and dynamically Revamped fan housing that allows the end-user to reconfigure the blower in the field by changing the direction ...
Flow: 55 m³/h - 1,050 m³/h
Operating pressure: 0 mbar - 460 mbar
Nominal power: 0.25 kW - 18.5 kW
1 1/4" input-output. Maximum air flow rate 70 m3 / h, Maximum air pressure (+) 120 mBar, Maximum vacuum flow rate 70 m3 / h, Maximum vacuum pressure (-) 110 mBar Weight 7 KG. The sound level is 48 dB (A).
Flow: 140 ft³/min - 2,900 ft³/min
Operating pressure: 8 psi - 24 psi
... rapid cleaning with minimal maintenance. Available accessories to be used with the LC Blowers are the Flexible Blower Sleeves, Blower Vibration Pads, and Blower Silencer Packages.
Flow: 3 m³/min
Operating pressure: 25,000 Pa
Nominal power: 1,450 W
... 12V or 24V Solutions for ventilation CENTRIFUGAL FANS backward fan single suction double suction CROSS-FLOW FANS TANGENTIAL BY-PASS BLOWER TURBINES Fireplaces ...
IPC
Flow: 1 m³/min - 113 m³/min
Operating pressure: 9,800 Pa - 98,000 Pa
Nominal power: 1.1 kW - 185 kW
... Series Roots Blower Description: ZG Blowers with tri-lobe are heavy duty style new products based on MB blowers which technology is from America. Introduction: ZG Blowers ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining