DN: 50 mm - 400 mm
Pressure: 16 bar
Temperature: -50 °C - 200 °C
Engelsberg butterfly valve SP210 Lug Type PN10/16/ANSI 150lb Reliable valve for shut-off or simple regulation of corrosive gas and liquids. The valve is completely tight in closed ...
Pressure: 10 bar
Temperature: 150 °C
... request. Internal Assembly The internal assembly includes two valve seat seals by default. Valve seat A can be executed either with a shrunk or screwed valve seat seal, whereas valve ...
GEA Procomac S.p.A.
Feeding and metering slide gate series is specifically designed for gravity-flow applications. The variable slide gate actuation setting enables fractional material flow and full-open or closed formats. It is constructed with carbon steel-infused ...
DN: 0.25 in - 0.5 in
Pressure: 980,000 Pa
Temperature: -10 °C - 150 °C
... epoch-making combination valve that enables manual flow control and fully on/fully off two-stage control by means of an air actuator. -The control of the fluid by means of a diaphragm ...
KITZSCT
DN: 2 mm - 8 mm
Pressure: 0 Torr - 20 Torr
Temperature: 150, 200 °C
... travel gate valves. The gate carriage moves in the valve body on a set of wheels, moved back and forth by a manual or pneumatically-actuated valve stem. Htc ...
Highlight Technology Corp.
DN: 100 mm - 400 mm
Aluminum butterfly valve for handling powders available from Ø100 to Ø400 mm. The valve can be supplied for hot materials with manual lever or pneumatic drive.
SCUTTI
DN: 1, 0.375, 0.5, 0.25 in
iPolymer Water Valve (WV) is manufactured in three material choices: PVC, Polypropylene, or PVDF. The valve has a spring return and is pneumatically actuated to open ...
International Polymer Solutions Inc.
PDA Pneumatic Control Valves allow for direct remote control of individual friction modules simultaneously on a brake. Brake friction modules can turned on or off from the PDA to set brakes to run ...
DN: 3 in - 24 in
... AIS-compliant knife gate valve is now available from DeZURIK. The AIS-compliant knife gate valve is based on DeZURIK’s successful KGC-BD design which is a cast stainless steel, resilient seated and bi-directional ...
DN: 2 in - 24 in
... iron body. Series 1100 (Split Body, Resilient Seated Butterfly Valve) Our resilient seated butterfly valve is our most commonly sold butterfly valve. This series butterfly valve ...
Valtorc
DN: 65 mm - 350 mm
Pressure: 1.6 bar - 26 bar
Temperature: -196 °C - 650 °C
... of single seat control valve are of trim balanced design, offering good dynamic stability. These valves can work under relatively high pressure drop conditions. The actuator for P3/J3 series can be ...
Wuxi Smart Auto-control Engineering Co., Ltd.
Sanitary Stainless Steel SS304 Air Pressure Relief Valve with manometer for fermentation tank Available Standard: ISO,DIN,3A,SMS Valve Type :Safety Valve Seal: Silicon/EPDM/PTFE Application: ...
Slide valves are used for complete closure of a pipe in the case of explosion, and therefore they are suitable for protection of production technologies with danger of dust explosion. Suitable for pneumatic ...
DN: 40 mm - 250 mm
Control valves with pneumatic actuator -Flow control, mixing and distribution of liquids, steam and gases; two and three way -Steam desuperheating for pressure reduction and simultaneous cooling ...
DN: 0.5, 0.25, 0.75 in
Pressure: 0 bar - 5.5 bar
Temperature: 0 °C - 82 °C
Furon Q-Valve Pneumatic Valves from Saint-Gobain are cost-effective, high-performance products used for semiconductor processing. They are compatible with most common installations, and ...
DN: 0.75 in - 1.5 in
Pressure: 0.3 bar - 8.6 bar
Temperature: -20 °C - 85 °C
... Diaphragm Valve BRD and BDV series are dust collector valves used specifically in dust collector and baghouse systems. The two chambers of the dust collector valves are connected together ...
DN: 7, 4 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
PRESSURE SAFETY VALVE ► For maintaining the position of a double-acting cylinder if the operating pressure drops ► The valve consists of 2 check valves that are unlocked pneumatically
Pressure: 100, 500, 1,000 bar
... Poppe + Potthoff Maschinenbau GmbH develops and manufactures high-pressure valves for the control and regulation of volume flows in hydraulic applications. The valves are pneumatically ...
DN: 2 mm - 17.5 mm
Pressure: 1,400 bar
Temperature: 10 °C - 80 °C
... aforesaid valves allow not only to fill, but also to carry out the delivery under pressure with nominal diameters being double compared with the valves that are normally on the market for the pressure ...
... sampling valve is designed according to the latest construction standards and recognized safety rules. Advantages • A sample can be taken during the process to ensure that the output meets specifications before further ...
DN: 4 mm - 13 mm
Pressure: 12 bar
Temperature: -20 °C - 80 °C
Using the Universal Series technology, the Parker Legris light series valves offer the advantages of compactness, ease of operation and long-term reliability. Features/Benefits: • - Easy-to-Use • - Ease of operation ...
... Way and 3-Way ‘Y’ Valves are available in manual or air-operated platforms and are used in gravity flow systems. Both the manual and air-operated diverters ...
Manually operated. Motor/electrical actuator operated. Shutters type SKT can be installed into a grain spout for the regulation or cutting off of the flow. The shutter type SKT is controlled by ...
DN: 50 mm - 150 mm
Pressure: 0 bar - 25 bar
Temperature: 0 °C - 230 °C
Cleanvalve is a bottom flush valve designed for use on glass-lined, Stainless Steel or Nickel Alloy reactors / Tanks. This easy-to-operate, easy-to-clean, self-draining valve allows for a variety of ...
DN: 65 mm - 150 mm
This model is designed for installation in a flight conveyor line. Materials: Our samplers are made of austenitic stainless steel Standard materials (according to AISI): 316Ti and 321
Please specify:
Help us improve:
remaining