EPILOG LASER glass cutting machines

Laser power: 0 W - 30 W
Repeatability: 1,064 nm
Overall length: 1,450 mm

... laser wire cutting technology is used to cut the whole plate of the mobile phone camera protection glass to replace the traditional CNC processing mode. Picosecond laser cutting machine ...

Laser power: 0 W - 40 W
Repeatability: 1,064 nm
Overall length: 1,450 mm

... laser wire cutting technology is used to cut the whole plate of the mobile phone camera protection glass to replace the traditional CNC processing mode. Picosecond laser cutting machine ...

Laser power: 0 W - 40 W
Repeatability: 1,064 nm
Overall length: 1,450 mm

... laser wire cutting technology is used to cut the whole plate of the mobile phone camera protection glass to replace the traditional CNC processing mode. Picosecond laser cutting machine ...

X travel: 610 mm
Y travel: 305 mm
Z travel: 145 mm

... and small series CO2 laser machine LASER TABLE The LS100EX CO2 laser machine is a medium-sized machine for engraving and cutting. Its engraving area matches the ...

X travel: 460 mm
Y travel: 305 mm
Z travel: 145 mm

... signage, creative cutting, and personalization. LASER TABLE The LS100 is enclosed, easy to operate, and is a compact laser engraver. This compact laser engraving machine is suitable for laser cutting ...

X travel: 610 mm
Y travel: 305 mm
Z travel: 145 mm

... and small series CO2 laser machine LASER TABLE The LS100EX CO2 laser machine is a medium-sized machine for engraving and cutting. Its engraving area matches the ...

X travel: 660 mm
Y travel: 660 mm
Z travel: 203 mm

... IntelliMAX® Software with real world cutting data • Programmable Motorized Z-Axis with a precision MAXJET 5i Nozzle Assembly boosts cutting productivity and process efficiency • Tilt-A-Jet taper compensating ...

X travel: 3,302 mm
Y travel: 1,575 mm
Z travel: 305 mm

... Washington, USA • Does not create heat-affected zones or mechanical stresses • Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics • No tool changes ...

X travel: 4,267 mm
Y travel: 2,032 mm
Z travel: 305 mm

... stresses • Machines a wide range of materials and thicknesses, from metals and composites to glass and plastics • No tool changes & minimal fixturing dramatically reduce setup The pinnacle in high ...

X travel: 1,210, 2,250 mm
Y travel: 1,540 mm
Maximum cutting height: 25 mm

... choice of cutting heads - Cutting head with vibrating or non-vibrating blade -Cutting head with orientable blade - Non-vibrating disk - Creasing wheels of 60 or 90 mm of diameter - ...

X travel: 4,050, 2,050, 1,050 mm
Y travel: 1,220, 2,050 mm
Z travel: 150, 220 mm

Water jet machine to simplify cutting of smooth or light material designed for industrial use STRENGHTS Cuztomizable equipment 3 differents sizes Visible laser Additionnal modules for environment ...

X travel: 1,050 mm
Y travel: 750 mm
Cutting speed: 12,000 mm/min

... versatile format. Proposed with a high-pressure pump 4136 bars of 10 to 20 HP, this machine enables the pure water jet cutting of soft materials or abrasive water cutting for hard materials. Compact ...

Overall length: 3,914 mm
Overall width: 3,078 mm
Height: 1,230 mm

The SP3000 Laser Cutter is a CO₂ laser cutter for processing large format materials. - Processing area: 2210 x 3210 mm - Laser power: 60 - 400 W With SP Laser Cutter you can engrave ...

Acceleration: 10 m/s²
Overall length: 3,214 mm
Overall width: 2,520 mm

The SP2000 Laser Cutter is a CO₂ laser cutter for processing large format materials. - Processing area: 1680 x 2510 mm - Laser power: 60 - 400 W With SP Laser Cutter you can engrave ...

Laser power: 60 W - 200 W
Acceleration: 19 m/s²
Overall length: 1,940 mm

The SP500 Laser Cutter is a CO₂ laser cutter for processing large-format materials. - Processing area: 1245 x 710 mm - Laser power: 60 - 200 W With SP Laser Cutter you can engrave ...

X travel: 610 mm
Y travel: 305 mm
Z travel: 178 mm

... Fusion Maker Laser Machine Entry-level laser, professional-grade results Up to 60 IPS (1.5m/s) engraving speeds FEATURES: Machine Enhancements Designed to Increase Productivity The Fusion ...

X travel: 610 mm
Y travel: 610 mm
Z travel: 254 mm

... FEATURES: Machine Enhancements Designed to Increase Productivity The Fusion Edge laser engraving and cutting machines from Epilog Laser combine our top-of-the-line technology and our ...

X travel: 914 mm
Y travel: 610 mm
Z travel: 254 mm

... FEATURES: Machine Enhancements Designed to Increase Productivity The Fusion Edge laser engraving and cutting machines from Epilog Laser combine our top-of-the-line technology and our ...

X travel: 300 mm
Y travel: 200 mm
Cutting speed: 1,500 mm/s

1. Machine's general introductions Our ST-3020-40 desktop model laser engraving machine is designed mainly for engraving and carving the stamp and small art products, this machine ...

X travel: 1,800 mm
Y travel: 1,000 mm
Cutting speed: 1,500 mm/s

... "automatic standby model" . Glass laser tube - fine and strong laser beam, mainly for cutting and engraving on soft materials like the cloths and fabric, machine with the fast cutting ...

X travel: 1,200 mm
Y travel: 1,200 mm
Cutting speed: 1,500 mm/s

... engraving machine with advanced and mature DSP control system, which has the function of "power off memory" and "automatic standby model", Laser tube - fine laser beam, special for cutting and engraving ...

X travel: 900 mm
Y travel: 600 mm
Cutting speed: 1 mm/min - 10,000 mm/min

... plastic, laser cutting plexiglass. ★Product Features: 1. The plastic engraving machine and the plexiglas laser cutting Machine adopts automatic stainless steel crawler ...

X travel: 0 mm - 8,000 mm
Y travel: 0 mm - 8,000 mm
Z travel: 0 mm - 1,000 mm

... speed of the cnc water cutter is faster. 2. The high pressure water cutting machines adopt imported servo motor with accurate positioning and stable operation, the cutting ...

X travel: 600 mm
Y travel: 400 mm
Cutting speed: 0 mm/min - 3,600 mm/min

... reflect rate, longer service life. 5. Cutting effect: equipped with the industry's most advanced transmission system, automatically adjust the cutting speed, natural transition cutting ...

X travel: 3,000, 4,000, 1,000, 2,000 mm
Y travel: 2,120, 3,120, 1,120, 1,620, 4,120 mm

... the series of cutting machines with removable bridge “gantry” type, idea for cutting of large pieces as well as high production volume thanks to the possibility to have the multiple cutting ...

X travel: 1,330 mm
Y travel: 830 mm
Maximum cutting height: 15 mm - 55 mm

The M-800 is a laser cutting system that has a processing area that measures 1,330 mm x 830 mm. It is ideal for use in various operations, such as cutting, engraving, and as well as marking. ...

X travel: 1,800 mm
Y travel: 1,230 mm
Maximum cutting height: 15 mm - 55 mm

The L-1200 series is manufactured by Eurolaser, and is a laser cutting an engraving system that provides accurate and cut quality at highest cutting speeds. It is also capable to any ...

X travel: 1,800 mm
Y travel: 3,200 mm
Maximum cutting height: 58 mm - 80 mm

The L-3200 is a CO2-Laser Machine from Eurolaser. It can cut and engrave a broad range of materials on its 1800 x 3200 mm processing area. This laser machine is one of the largest units of the eurolaser ...

Maximum cutting height: 40 mm
Cutting speed: 800 mm/min - 3,000 mm/min
Overall length: 1,780 mm

... roller allows to lay the big sizes to be worked. SPECIAL EQUIPMENT FOR MOSAIC CUTTING: On the shaft of motor-spindle it is possible to mount a mosaic kit with 11 cutting blades in order to obtain ...

Cutting speed: 800 mm/min - 3,000 mm/min
Overall length: 2,600 mm
Overall width: 1,260 mm

Automatic machine for cuts, antislip incisions, pre-cut and special cut such as: mosaic, triangle, rombhus. Able to work with marble, granite, gres porcellanato, agglomerated, brick and single-double firing. ADVANTAGES ...

Overall length: 3,200 mm
Overall width: 2,100 mm
Height: 1,800 mm

... AUTOMATIC CUTTING MACHINE WITH 2 HEADS MTS is the new automatic machine for multiple linear cutting with diamond discs. Suitable for cutting single-fired, ...

X travel: 1,000 mm
Y travel: 600 mm
Laser power: 80 W

... to minimise material waste, the Blu100 is our best selling CO2 laser cutter. Capable of cutting thicker materials (even 18mm mdf in some cases), this laser cutter is robust, fast, versatile and comes ...

X travel: 1,250 mm
Y travel: 900 mm
Laser power: 100 W

... laser cutting machines is equipped with industrial-grade recirculating water cooling units. Electronically controlled and connected to your machine, this level of cooling helps to increase ...

X travel: 2,500 mm
Y travel: 1,325, 1,500 mm
Laser power: 200 W

Blu250 is the ideal machine for cutting over-sided parts. A truly massive machine, Blu250 is not suitable for all sites but for heavy commercial or industrial users that are cutting ...

X travel: 450, 360, 500, 600 mm
Y travel: 600, 400, 700 mm
Z travel: 50 mm

... Laser Glass Cutting Machine 1. Strengthened and non-strengthened glass cutting, such as: mobile phone glass cover, car glass ...

X travel: 1,600, 1,800 mm
Y travel: 2,500 mm
Cutting speed: 800 mm/s - 1,500 mm/s

... hide leather cutter 1.Specially developed for cutting, punching and marking on stickers, plastic films and other volume materials. 2.No mold, successfully replaced ...

X travel: 4,000 mm
Y travel: 2,000 mm
Z travel: 200 mm

Cutting metal thickness up to 300mm Speed up 50% time Save abrasive and cost saving 28%

X travel: 1,300 mm
Y travel: 2,600 mm
Cutting speed: 0 mm/min - 30,000 mm/min

... What materials can a CO2 laser cutter cut? A CO2 laser cutting machine can cut and engrave various non-metal materials, such as wood, acrylic, paper, feather, fabric, cloth, etc. Application CO2 ...

Maximum cutting height: 25 mm
Cutting speed: 1 mm/min - 1,000 mm/min
Laser power: 130 W - 150 W

... call the 1390 CO2 laser cutting machine as the CNC laser wood cutter machine for small business. It is an industrial-grade laser machine, both for wood ...

Laser power: 80, 100, 150 W

This Co2 Laser etching machine is a mixed laser cutting machine. It uses co2 laser source to engraving and cutting metal and non-metal, such as glass, ...

Laser power: 75 W - 300 W

... Equipped with the blade table, these industrial laser cutter engraver can be used to process rigid advertising boards such as acrylic and MDF. 2. With a wide range of applications, industrial laser cutter ...

Cutting speed: 500 mm/s

... table for cutting very flexible materials. The high rigidity of the CUT-X 400 CO2 laser cutting and engraving machine allows you to obtain a perfect and precise result on all materials. Simple ...

Cutting speed: 500 mm/s

... protected from contaminants. Perfect laser cutting The CUT-X 600 machine allows you to obtain high cutting quality even at high speed. It is also one of the fastest machines ...

Cutting speed: 600 mm/s

... perfect cutting quality, even if your material is not perfectly flat and linear. Simple and intuitive interface Our CUT-X 900 laser cutting machine comes with a man-machine ...

X travel: 2,032, 1,524, 1,320 mm
Y travel: 3,048, 2,048, 2,540, 1,270 mm
Maximum cutting height: 76 mm

... , we have the quickest laser cutting machine for engraving large areas on the market (from a working area of 1320 x 1270 mm). This means that you can achieve a better output at the highest standards of ...

Maximum cutting height: 20 mm
Overall length: 500 mm
Overall width: 600 mm

The LARGE CUTTING MACHINE GM Z-250 is an automatic electric cutting machine with pre-determination of the pieces and resolution of the measurements in millimeters. The ...

Maximum cutting height: 20 mm
Operating pressure: 6 bar
Overall width: 450 mm

The CUTTING MACHINE SP101 STANDARD is a highly versatile machine and has been designed to meet production needs in many sectors. Using the CUTTING MACHINE ...

Maximum cutting height: 17 mm
Tube diameter: 17 mm
Operating pressure: 6 bar

... of the machine. It is possible with the keyboard to set and modify the cutting timings and the motor speed to maximize the productivity and quality of the processed product. Using the keyboard ...

... movement X and Y, Z Cutting wheel Vertical movement. Movement stop "Z" We can limit Z movement (drive) Wash jet To clean the entire cutting area after the cutting operation. Door ...

c-cut is a machine designed for laser cutting, drilling and milling of optically transparent brittle materials, primarily for laser processing of glass. With cericom's ...

X travel: 700 mm
Y travel: 500 mm
Cutting speed: 2 m/s

Small sized systems featuring cutting edge technology providing flexible operation with high performances and safety. ■ The Dragon structure is composed of a coated electro welded metal sheet mono-block. ■ Performances: ...

... laser cutting and marking. • - Processes: cutting, kiss-cutting and marking, engraving and micro-perforation. • - Processable materials: PMMA, acetates, ABS, plastics in general, ...

Laser power: max 800.0 W

... productivity.  • Processes: cutting, engraving and marking. • Processable materials: wood, acetates, acrylic (PMMA), ABS, plastics in general, leather, textiles, marking on glass ...

X travel: 1,300 mm
Y travel: 2,500 mm
Laser power: 150, 80 W

CO2 Laser Cutting Machine 1300*2500mm Applications ✦Applicable Materials: Non-metal materials such as stone, marble, granite, gravestone, tombstone, acrylic, glass, ceramics, ...

X travel: 600 mm
Y travel: 900 mm
Cutting speed: 0 mm/min - 10,000 mm/min

6090 Acrylic Stone Leather Laser Cutting Engraving Machine Crafts Products 60*90cm Laser Machine With Optional HoneyComb Or Blade Sheet Working Table. PRODUCT DESCRIPTION 1.Small ...

... mass production and processing time limitation of garment industry. We develops a new model of automatic feeding laser cutting machine. It can shorten the processing time greatly, save labor power and ...