Essentra Components screws

Diameter: 5 mm - 10 mm
Length: 43.5 mm - 90 mm

... grubs the workpiece. Made of wear-resistant hardened steel. Have internal hex for tightening the screw. Statistic Load Capacity (kN): 4.5 to 20 Thread Size: M5x0.8 M6x1 M8x1.25 M10x1.5 Length: 8.5 ...

Diameter: 5 mm - 10 mm
Length: 9 mm - 42.9 mm

... holds the workpiece. Made of wear-resistant hardened steel. Have internal hex for tightening the screw. Statistic Load Capacity (kN): 4.5 to 20 Thread Size: M5x0.8 M6x1 M8x1.25 M10x1.5 Length: 9 ...

Diameter: 4 mm - 24 mm
Length: 12 mm - 100 mm

The serrated ball swivels to allow for self-alignment on uneven surfaces. Statistic Load Capacity (kN): 5.3 to 85.6 Thread Size: M6x1 M8x1.25 M10x1.5 M12x1.75 M16X2 M20X2.5 M24X3

Diameter: 5 mm - 10 mm
Length: 10 mm - 50 mm

GN 1580 Stainless Steel-Screws and nuts in Hygienic Design are certified according to EHEDG guidelines and are therefore ideal for use in hygienic areas. The sealed mounting surface enables components to be mounted without ...

Clamping screws, ball terminal, steel Material: Black-oxide steel, hexagon socket head. Standard executions: Hardened steel ball. GN 605-A: ball for applications requiring a single point contact. GN 605-B: reversible ...

... self-tapping, adjustable and reverse-locked. In the medium to long term, direct screw-fittings with metallic screws in plastics can lead to problems with the fit and failure of the thread ...

... major challenge. To enable the fastening of thin sheet materials and thin-walled components without the need for internally threaded elements, we have developed QUICK FLOW® self-tapping fasteners.

For so-called "banjo screws", the function of the K' in K' thread is also extremely important. The K' in K' thread cuts its own pilot thread into the existing plastic ...

Diameter: 10, 8 mm
Length: 10.7, 13.9, 17.1 mm

... styles of fast-lead captive screw retainers Get the functionality of a "quicker" screw fastening solution and the ease of more forgiving alignment, for frequently accessed applications. These fasteners ...

Diameter: 3 mm
Length: 17 mm

Each screw thread size dictates the total length and thread grip area of the screw, but comes with multiple standoff mounting dimensions to accommodate varying panel ...

Diameter: 4, 3 mm
Length: 8.4 mm - 11.6 mm

Flush mount screws install in panels as thin as 1.3 mm (.05"). Screw fastens into a threaded insert or other threaded receptacle. Flush when fastened Screw ...

Diameter: 8, 12 mm
Length: 17, 22 mm

This Clamping screws is manufactured by Norelem. Its material is made up of tempered steel. In addition, The surface of the said product is heat-treated and black oxide finish.

Knurled screws low head steel and stainless steel, DIN 653 Material: Steel or stainless steel (A 1). Version: Steel grade 5.8, bright; Stainless steel, bright.

Length: 10 mm - 120 mm

Socket head screws DIN 912 / DIN EN ISO 4762, steel or stainless steel Material: Steel or stainless steel (A 2) Version: Steel grade 8.8, black or galvanised. Steel grade 10.9, black or galvanised. Stainless steel A 2-70, bright.

Hexagon Head Self Tapping Screw DIN 7976/ISO 1479 Form C (point) with Slot - Sharp Shaped Head, Stainless Steel A2 with Goebel Silver GL Coating Packaging - Goebel Surface - GOEBEL Silver GL Material - A2 Thread ...

Diameter: 4.3 mm
Length: 13 mm
Batch size: 1,000 unit

Hexagon Head Self Tapping Screw DIN 6928 Form C (point) with Flange and Slot - Sharp Shaped Head, Stainless Steel A2 Packaging - Goebel Material - A2 Thread - C Disc - without

Diameter: 4.2 mm
Length: 13 mm
Batch size: 1,000 unit

Hexagon Head Self Tapping Screw DIN 7976/ISO 1479 Form C (point) with Slot - Sharp Shaped Head, Stainless Steel A2 Packaging - Goebel Material - A2 Thread - C Disc - without

SELF-CLINCHING PANEL FASTENERS (Reduced type) Family Self-clinching panel fasteners Type of product Press-in Captive Screws Receiving material Inox, Light Alloy, Steel Assembly Pressure Coating In ...

SELF-CLINCHING PANEL FASTENERS Family Self-clinching panel fasteners Type of product Press-in Captive Screws Receiving material Light Alloy, Stainless Steel, Steel Assembly Pressure Coating Nichel-Plated SELF-CLINCHING ...

Diameter: 10 mm
Length: 38.5 mm

The zero-point clamping system is designed for set-up-time clamping with cutting and non-cutting processing. It is applicable in food, pharmaceutical and chemical industries. The clamp has an installation clamping module. The clamping ...

Diameter: 16 mm - 26 mm
Length: 50 mm - 76 mm

For horizontal acting toggle clamp plus. complete with U-washers, hex nuts and screw with bonded pressure pad, made of oil-resistant neoprene to prevent damage to delicate workpieces. Hardness 85 Shore A, LABS-free (silicone-free). ...

Diameter: 8, 12, 10 mm

STOP SCREW ADJUSTMENT SCREW ► Stop stroke adjustment screw for M12 sensor mount ► Stop stroke adjustment screw with customizable sensor mount

Diameter: 10, 8 mm

STOP SCREW ADJUSTMENT SCREW ► Stop stroke adjustment screw with customizable sensor mount

Clamp screws In different lenghts M 12 + M16

Diameter: 5 mm - 42 mm
Length: 10 mm - 260 mm

Diameter: 5 mm - 42 mm
Length: 6 mm - 200 mm

Diameter: 3 mm - 24 mm
Length: 3 mm - 170 mm

Diameter: 12 mm - 30 mm
Length: 175, 125 mm

Levellings stud with small hexagon on top. For PRP Jacmount® Adjustable Levelers.

Diameter: 12 mm - 30 mm
Length: 125 mm - 175 mm

Levelling studs with large hexagon on top. For PRP Jacmount® Adjustable Levelers.

Diameter: 20 mm
Length: 175, 150 mm

The SW15 series of levelling screw is engineered with a hexagonal head. Moreover, this unit is ideally used with PRS or PRSK Jacmount Adjustable Levers.

Diameter: 2 mm - 36 mm
Length: 4 mm - 200 mm

HEXAGON HEAD SCREW - STAINLESS A2 - DIN 933 - ISO 4017

Diameter: 1.6 mm - 24 mm
Length: 3 mm - 220 mm

HEXAGON SOCKET HEAD CAP SCREW - STAINLESS STEEL A2 - DIN 912 - ISO 4762

Diameter: 2.5 mm - 20 mm
Length: 5 mm - 150 mm

HEXAGON SOCKET COUNTERSUNK HEAD SCREW - STAINLESS STEEL A2 - DIN 7991 - ISO 10642

Diameter: 6 mm - 24 mm
Length: 20 mm - 120 mm

... thrust screws can also be used for clamping, tightening or supporting of non-parallel surfaces. The flat-faced, movable ball enables a flat load transmission. Material Ball Ball-bearing steel, hardened Stainless ...

Diameter: 6 mm - 24 mm
Length: 20 mm - 120 mm

... Maximized load transmission due to moveable ball. Material Ball Ball-bearing steel, hardened Stainless steel, hardened Screw Heat-treated steel, 1200 ±100 N/mm2 Stainless steel 1.4305

Diameter: 4 mm - 16 mm
Length: 10 mm - 80 mm

Diameter: 6 mm - 16 mm
Length: 30 mm - 80 mm

Diameter: 8 mm - 30 mm
Length: 36.6 mm - 100 mm

Manufacturing Process CNC Machining & Injection Molding PEEK material performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties ...

Diameter: 1 mm - 3 mm
Length: 4 mm - 80 mm

Plastic screws are fasteners used for assembling plastic components. Nylon screws can be used with or without nuts and bolts . Plastic screws are lightweight, tough, resistant to corrosion, ...

Length: 10 mm - 35 mm

Plastic screws are fasteners used for assembling plastic components. Nylon screws can be used with or without nuts and bolts . Plastic screws are lightweight, tough, resistant to corrosion, ...

Diameter: 3, 4, 5, 6 mm
Length: 4 mm - 30 mm

Plastic screws are fasteners used for assembling plastic components. Nylon screws can be used with or without nuts and bolts . Plastic screws are lightweight, tough, resistant to corrosion, ...

Diameter: 10 mm
Length: 18 mm

insulated terminal screw, negative steel, zinc coated safetylock yellow black head with measuring point

Diameter: 10 mm
Length: 18 mm

... measuring point Different thread sizes Ready to shipping Shipping with DPD 2 years warranty Directly from manufacturer Fast service Product information "insulated terminal screw M10 x 18, negative" insulated ...

Diameter: 10 mm
Length: 18 mm

... measuring point Different thread sizes Ready to shipping Shipping with DPD 2 years warranty Directly from manufacturer Fast service Product information "insulated terminal screw M10 x 18, negative, ...

Diameter: 2 mm - 3 mm
Length: 4 mm - 18 mm

■ Self-tapping screws for mounting PCB on bosses or standoffs. ■ EM-3-6 self-tapping screws are suitable for mounting 1.6mm or thicker PCB.

Hexalobular (TORX) screws for enclosures. Recommended to be used for tamper resistance, or for an robust look and feel. Requires the use of a torx screwdriver.

Diameter: 3 mm - 6 mm
Length: 6 mm - 10 mm

SSHS-UC is a hex socket head cap screw with special low profile for fixing thin plates. Stainless steel SUSXM7 is used in the main body of the screw. The head height is 1.5mm or less. Since the SSHS-UC ...

Diameter: 2 mm - 6 mm
Length: 4 mm - 10 mm
Batch size: 10 unit

SSHS-UCL is a hex socket head cap screw with special low profile. This screw is made of the stainless steel, SUSXM7, and washed in the ISO Class 7 cleanroom (Class 10000 of U.S. Federal Standard). Characteristics ...

Diameter: 3 mm - 12 mm
Length: 6 mm - 40 mm
Batch size: 1 unit - 20 unit

The Extra Low Profile Socket Head Cap Captive Screw SPE series possesses unique characteristics: Anti-fall design to minimize the risk of loss. Suitable for fastening protective and inspection covers that are frequently ...

Quick installation VALDINOX offers a wide range of universal fixings and accessories, 100% compatible. Our quick installation accessories save time and costs by reducing fixing elements required and thus minimizing the risk of execution ...

Diameter: 7 mm - 13 mm
Length: 10 mm - 60 mm

This order link is for 100pcs. This kind of IP69K Powertrain Vents Screw-in Type M20x1.5 is good for Powertrain, Gearbox, New Energy Battery Pack IP69K, IP68, Breather with Valve. Milvent Venting Plug ...

Performance: Metal Dual Vent is designed to improve double check valve have risk to let the dust particulates entry enclosure during negative pressure happen under a tough environment. The structure inside combines a porous filter under ...

M4x0.7 Venting Element,Screw In Vents, Pressure Release Vavle,Waterproof Venting Plug, Breather Plug, Battery Pack Vents . etc The new design tiny venting screw (pressure release elements) with an ...