Garlock lipped seals
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Temperature limit: 260 °C
Diameter: 8 mm - 30 mm
... High-Performance Shaft Seal The thermoelastic high-performance seal Multi-Seal is an alternative for mechanical seals and braided packings. The thermoelastic ...
Diameter: 2,000, 3 mm
... face-type” seal produced in Nitrile or Viton, the Timken line of V-Seals™ function as an additional sealing element. V-Seals are recommended for extreme, high-contaminant environments V ...
Temperature limit: -70 °C - 250 °C
Shore A hardness: 50 unit - 98 unit
Sealing Solution for Hydraulic, Pneumatic and Oleo-Pneumatic Applications JF4 sealing rings are seals with a cross-section comprising 4 lobes. JF4 sealing rings offer a better solution to ensure tightness of hydraulic, ...
Hutchinson Precision Sealing Systems
Temperature limit: -60 °C - 250 °C
Banjo Seals have been developed primarily for the automotive and trucks sector for systems using connectors in the transfer of fluids. They offer significant advantages over metal-only copper or aluminium washers. The ...
Hutchinson Precision Sealing Systems
Temperature limit: -70 °C - 250 °C
Expertise and Innovation As a manufacturer, we can accompany your developments. Always lending an attentive ear to the demands of its clients, Hutchinson O-Ring Division is constantly developing new sealing solutions to meet the client’s ...
Hutchinson Precision Sealing Systems
Temperature limit: 205 °C
Pressure limit: 0 bar - 14 bar
Diameter: 20 mm - 610 mm
... -directional seal with or without shaft rotation, on horizontal or vertical applications. Bolted flange designs are per customer specification. It can be used in thousands of applications from 3/4" to 20" shaft sizes. ...
Diameter: 0.188 in - 12.598 in
... features include: Optimized sealing lip material Spring-loaded sealing lip Optimally balanced sealing lip and flex section Beaded outside diameter Auxiliary ...
SKF
Temperature limit: -30 °C - 204 °C
... resistance. Features and Benefits: Easy by-hand installation — no need for an arbor press Uses less energy than contact lip seals Non-contact engineered labyrinth design reduces shaft drag Non-wearing ...
Garlock
... 60° ± 5 Shore A Surface and colour black Seal lip Yes Position sealing element lateral Product type gasketing Seal type clip-on profile self-locking Clamping edge is or up to 3 Clamping ...
EMKA Beschlagteile GmbH & Co. KG
... Industries Automotive Product Features The seal friction was reduced by narrowing the seal lip by 10% and lengthening it by 70%, compared to conventional bearings ...
Temperature limit: max 80.0 °C
Pressure limit: max 50000.0 Pa
... Radial Shaft Seals are highly ideal for resistance against sludge it also protective to dirt and residue from outside sources. It also features outstanding avoidance to fragmented ingress due to the optimal positioning ...
Simrit
... : The cover and adapter profile made of flexible plastic are used for two different applications. As a cover profile it seals the profile slots against dust and dirt. As an adapter profile with the open side facing ...
Temperature limit: -25 °C - 120 °C
Diameter: 32 mm - 150 mm
for clamp connection according to DIN 32676 series A Short Info Description, addition to product name - for clamp connection according to DIN 32676 series A Construction / Material Specification of the connection solution - Liquid-tight ...
Temperature limit: -25 °C - 120 °C
Diameter: 32 mm - 150 mm
Sealing ring for solid, liquid and gaseous media in the food industry, pharmaceuticals and chemicals, for threaded spigots to DIN 11851 Specification of the connection solution - for threaded spigots with external milk pipe thread ...
Temperature limit: -50 °C - 300 °C
Pressure limit: 0 bar - 15 bar
Diameter: 4 mm - 380 mm
... to conventional lip seals. This benefit allows: The use of standard or stainless steel shafts Removal of surface treatments: carburizing, hard chrome plating, etc… The direction ...
Duff-Norton Europe
Temperature limit: -50 °C - 300 °C
Pressure limit: 0 bar - 15 bar
Diameter: 6 mm - 380 mm
... to conventional lip seals. This benefit allows: The use of standard or stainless steel shafts Removal of surface treatments: carburizing, hard chrome plating, etc… The direction ...
Duff-Norton Europe
Temperature limit: -50 °C - 300 °C
Pressure limit: 0 bar - 15 bar
Diameter: 4 mm - 380 mm
... to conventional lip seals. This benefit allows: The use of standard or stainless steel shafts Removal of surface treatments: carburizing, hard chrome plating, etc… The direction ...
Duff-Norton Europe
Temperature limit: -35 °C - 100 °C
Pressure limit: 0 bar - 400 bar
Diameter: 18 mm - 250 mm
XT200 is an innovative rod seal developed for challenging high temperature applications that require both extrusion resistance and low leakage. Advantages • Superior static and dynamic sealing effect • Long service ...
KASTAS SEALING TECHNOLOGIES
Diameter: 9 mm - 57 mm
... O-Rings are designed for use with our Quick-Fit range of Cable Glands, enabling them to meet protection rating IP68 and to seal against oil, dust and water. Std. Color: black Material: Buna N
Temperature limit: -35 °C - 100 °C
Pressure limit: 450 bar
Diameter: 20 mm - 499 mm
The Hunger TDI tandem seal for inside sealing is a piston rod seal. It can be used with mineral oils and in modifi ed form with water base fl uids, fi re resistant fl uids and compressed air. The ...
Hunger
An opening in the panel can be achieved by cutting the mesh wires during assembly. A special rubber gasket to fit the orifice is available on request, to provide protection for personnel.
Single or double lip seal O-ring seals, hydraulic seals, x-ring joints, made-to-measure seals.
... THE RANGE 100MHz-10GHz - RIP-STOP FABRICS THAT ALLOW SELF-TERMINATING CUT ENDS ON GASKETS - AVAILABLE ON REELS, CUT-TO-LENGTH or PREFORMED READY TO INSTALL GASKET - PRESSURE SENSITIVE ADHESIVE ...
Diameter: 6 mm - 3,000 mm
Characteristics O/OG Type Medium to high load Medium to high leak tightness Medium spring back Available in shaped seal
Diameter: 6 mm - 3,000 mm
Metal C-Ring for Internal Pressure (CI) and External Pressure (CE) are designed for high pressure (system pressure energised).
Characteristics Medium to high radial load Medium leak tightness Close tolerances on shaft and bore Not available in shaped seal
... graphite bonded to a precision machined monel core providing a leak free seal and blow out resistance Highly compressible Sigma 600 to conform to flange face corrosion damage, to seal and prevent ...
Flexitallic
Utilizes an external ring which accurately centers gasket on flange face: provides additional radial strength to prevent gasket blowout and acts as a compression stop. A general purpose gasket ...
Flexitallic
Incredibly robust and resilient, metal-wound Change heat exchanger gasket is designed to deliver the most dynamic seal ever. Manufactured with proprietary equipment, using a 5-times thicker metal spiral ...
Flexitallic
Temperature limit: -269 °C - 600 °C
Pressure limit: 250 bar
SIGRAFLEX® HOCHDRUCKPRO, impregnated with adhesive-free inserts made from 0.05 mm stainless steelfoil 316L; inner and outer eyelet made from stainless steel 1.4571 and centering ring
Temperature limit: -269 °C - 550 °C
Pressure limit: 250 bar
SIGRAFLEX® HOCHDRUCKPRO, impregnated with adhesive-free inserts made from 0.05 mm stainless steelfoil 316L; inner and outer eyelet made from stainless steel 1.4571
Temperature limit: -269 °C - 550 °C
Pressure limit: 250 bar
SIGRAFLEX® HOCHDRUCKPRO, impregnated, with adhesive-free insert made from 0.05 mm stainless foil 316L and inner eyelet made from stainless steel 1.4571 and pre-compressed centering ring.
Metal bead gaskets Material profile Sheets coated with elastomers in the coil process or bright metal sheets are processed into high-quality metal bead gaskets using the progressive die method. For ...
FKM oil seals 882 References TECHNE has in stock a broad range of FKM oil seals : single ou double lip with standard profiles. The spring can be carbon steel or stainless steel, on ...
TECHNE
... V-ring seal has been designed to prevent the ingress of dust, dirt, water and oil, while keeping grease inside the system. V-Seal can be used to protect a wide range of bearings. It is sometimes used ...
TECHNE
Diameter: 10 mm - 300 mm
... Clamp seal according to SMS ISO 2852 Clamp seal according to BS OD/BS4825-3 Profiles Four profiles for PTFE enveloped clamp seals are available: Clamp seal type ...
TECHNE
The Migutec® profile is utilized for the division of floor surfacing into particular fields. It is also efficient for the dissipation of stresses. Also, the unit is suitable for use in field-limiting or in contraction joints. In ...
The MIGUTEC floor expansion joints are comprised of aluminum connection profiles between which spans an elastic insert of high-quality Synca elastomer. The profiles can be made up of stainless steel or brass cappings. They are utilized ...
... joint is used in the construction of parking decks, industrial structures, shopping centers, logistics centers and bridges. It seals movement joints in new construction and also during the course of renovation works. ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining