Gates nitrile rubber hoses
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Inner diameter: 9.5 mm - 25.4 mm
Outer diameter: 14 mm - 35.1 mm
Pressure: 165 bar - 5,500 bar
... high quality, abrasion-resistant rubber, MXT™ is a universally applicable premium product offering performance above industry standards. Tested to 600,000 impulse cycles, 3 times the industry standards. More flexible ...
Gates Europe
Inner diameter: 16, 12, 25, 19 mm
Outer diameter: 21.8, 36.8, 29, 25.4 mm
Pressure: 1,400 bar
Recommended for extremely high pressure hydraulic applications. ID5K is designed to meet or exceed all requirements of ISO 18752 Grade D and SAE100R13. It has been tested to 2,300,000 cycles at 133% of working pressure. This FAR exceeds ...
Gates Europe
Inner diameter: 16, 19, 25, 31 mm
Outer diameter: 50, 27.6, 31.4, 38.7 mm
Pressure: 168 MPa
Recommended for extremely high pressure hydrostatic drive applications. HD-UHP is designed to meet or exceed all requirements of ISO 3862 R15 specifications and performance requirements of EN 856 4SP (-10 to -20) and EN 856 4SH (-12 to ...
Gates Europe
Outer diameter: 25 mm - 168 mm
Pressure: 15.9 bar
Temperature: -20 °C - 46.1 °C
Transair Flexible Hoses are engineered for easy installation in tight spaces. Due to the tight bend radius, a flexible hose can be installed in tight, close quarter areas. ...
Outer diameter: 25 mm - 168 mm
Pressure: 15.9 bar
Temperature: -20 °C - 46.1 °C
Transair Flexible Hoses are engineered for easy installation in tight spaces. Due to the tight bend radius, a flexible hose can be installed in tight, close quarter ...
Inner diameter: 6.4 mm - 25.4 mm
Outer diameter: 11.5 mm - 33.3 mm
Pressure: 1,275 psi - 3,260 psi
Parker's Parkrimp Medium Pressure No-Skive hose BCH1 according to EN 857 1SC - ISO 11237 with the No-Skive thin cover hose construction is a hose classified as "Good". This means that ...
Parker Hose Products Division - Europe
Inner diameter: 4 mm - 12 mm
Outer diameter: 7 mm - 17 mm
Pressure: 1,160 psi
General Purpose, Industrial Rubber Tubing Versilon™ Nitrile flexible, fluid transfer tubing from Saint-Gobain is widely used in industrial applications requiring chemical resistance. It is economical, ...
Inner diameter: 0.5 in - 2 in
Outer diameter: 0.8 in - 2.26 in
Pressure: 5,000 psi
... times longer than standard hose during hose-to-hose and hose-to-metal abrasion tests per ISO 6945 and offers superior ozone and weathering resistance. The optional ...
Inner diameter: 19 mm - 100 mm
Outer diameter: 31 mm - 118 mm
Pressure: 10 bar
... Stainless steel SZR crimp fittings FEATURES Outer Layer CR rubber, smooth and green. Reinforcement Stainless steel wire spring and synthetic cord reinforcement. Inner Layer NBR rubber, ...
Inner diameter: 0.5 in
Pressure: 160 bar
Delivered length: 6 m
Manufactured in NBR with a steel reinforcement braid. With two swaged nuts and male-male adaptor on both ends. 6 m x 1/2". Working pressure: 160 bar. Connection threads: 1/2" BSP (MM).
Inner diameter: 0.25 in
Delivered length: 4 m
Manufactured in NBR with a high density steel reinforcement braid. With two swaged nuts and male- male adaptor on both ends. 4 m x 1/4". Working pressure: 400 bar. Connection threads: 1/4" BSP (MM).
Inner diameter: 6 mm - 25 mm
Outer diameter: 13.1 mm - 36.1 mm
Pressure: 450, 400, 360, 320, 225 bar
... surpasses them by a wide margin, meaning that equipment fitted with Infinity hoses can be run harder for longer. Infinity, like the majority of Manuli’s hoses, has a Nitrile Rubber ...
MANULI HYDRAULICS
Inner diameter: 13 mm - 100 mm
Pressure: 16 bar
Temperature: -30 °C - 80 °C
... CIP installations. Both, tube and cover are resistant to oil and fats and is FDA Compliant. Blaudieck® LGD is manufactured to European standards. Specifications Construction Tube: White, non-porous and smooth NBR ...
Continental Industry Contitech
Refuelling hoses for petroleum based products and chemicals are quality hoses by ELAFLEX / ContiTech, setting the standards. Available as reel, cut lengths or assemblies e.g. TW hose ...
Elaflex Hiby GmbH & Co. KG
... airfield all hose type can be optional ordered with NEON bands for improved visibility. Distribution usually by authorized distributors, agents and subsidiaries. OEMs are supplied directly by ELAFLEX. 'YELLOW BAND' ...
Elaflex Hiby GmbH & Co. KG
... Avoid permanent kinking. Type FHD is a collapsible marine bunkering hose. It can be reeled up fiat, takes little space to stow away and is easy to handle. Used as pressure discharge hose for ail Petroleum ...
Elaflex Hiby GmbH & Co. KG
Inner diameter: 40 mm - 305 mm
Pressure: 1.5 bar - 6 bar
Temperature: -10 °C - 60 °C
Hose designed for the transport of abrasive materials in hard working conditions. It is equipped with an internal formulation layer composed of nitrilic rubber and PVC, as well as an external rigid PVC ...
Inner diameter: 40 mm - 152 mm
Pressure: 8, 10 bar
Temperature: -20 °C - 75 °C
Flat hose for transfer and transport of agricultural irrigation and construction at low pressure. Great flexibility and lightness. Easy installation. Applications Transvase, transport and impulse of drinking water, ...
Inner diameter: 40 mm - 406 mm
Pressure: 0.098 bar - 5.39 bar
PVC/NBR hose with double reinforcement, textile and metallic spiral for aspiration and transfer of fluids in the agricultural and industrial sector. Very flexible, even at low temperatures. Layers Galvanized polyester ...
Inner diameter: 50.8 mm - 102 mm
Pressure: 2.2 bar - 10 bar
Temperature: -40 °C - 50 °C
PVC/NBR hose reinforced with a grey anti-shock rigid PVC spiral. Its particular mixed rubber nitrylic formulation gives it a high flexibility at extreme low temperatures. Its profile with a slightly ...
IPL SPA
Inner diameter: 25 mm - 203 mm
Pressure: 3, 6, 8 bar
Temperature: -10 °C - 60 °C
PVC layflat hose, with special PVC/NBR liner (black inside and blue outside), with high tenacity polyester textile reinforcement. Very light and easy to handle, it has a high resistance to ageing, UV rays, ozone, atmospheric ...
IPL SPA
Inner diameter: 50.8, 76.2, 101.6 mm
Outer diameter: 66.6, 96.2, 123 mm
Pressure: 6, 7 bar
... tank drop hose, reinforced with an anti-shock rigid PVC spiral and Polyester yarn; exposed spiral for easy handling and dragging. The hose is conductive (R<102 Ohm/m) by earthing the copper wire under ...
IPL SPA
Inner diameter: 0.5, 9.6, 19.2, 16 in
Outer diameter: 15.9, 26.5, 18.9, 22.9 mm
Pressure: 16 bar
Inner diameter: 16, 20, 25 mm
Outer diameter: 23, 29, 34 mm
Pressure: 15 bar
Rubber hose reinforced with textile fibres. Made of flexible SBR and NBR, with resistant polyester fibre reinforcement. Applications Compressor equipment used ...
Inner diameter: 6 mm - 51.8 mm
Outer diameter: 17 mm - 71.5 mm
Pressure: 35 MPa - 70 MPa
ARTERY° WIRE SPIRAL HYDRAULIC RUBBER HOSE Inner Tube: NBR synthetic rubber, which is suitable for biodegradable hydraulic oil delivery Reinforcement: 4-layer or ...
Guangzhou YuBen Hydraulic Technology Co., Ltd.
Inner diameter: 51 mm - 152 mm
Outer diameter: 66 mm - 171 mm
Pressure: 6, 18 bar
Suction and delivery rubber hose, tested and certified by BUREAU VERITAS for use in Atex area (Ex-Zone), suitable for powdery and granular dry food products. Manufactured according to GMP (Reg. (CE) 2023/2006).
TUDERTECHNICA - TUBIGOMMA DEREGIBUS SRL
Inner diameter: 38 mm - 407 mm
Outer diameter: 70 mm - 460 mm
Pressure: 10 bar
Suction and delivery conductive rubber hose suitable for abrasive materials like coal dust, sand, stone chips in dredging operations. Can be assembled with reusable aluminum coupling system.
TUDERTECHNICA - TUBIGOMMA DEREGIBUS SRL
Inner diameter: 25 mm - 102 mm
Outer diameter: 37 mm - 118 mm
Pressure: 30, 10 bar
Extremely flexible suction and delivery rubber hose suitable for fatty and non-fatty food products. Hose tested according to the main norms for food contact materials ...
TUDERTECHNICA - TUBIGOMMA DEREGIBUS SRL
Inner diameter: 19 mm - 63 mm
Outer diameter: 28 mm - 77 mm
Pressure: 10 bar - 48 bar
Two-layer hose in thermoplastic PVC, PU, NITRILE RUBBER compound with embedded galvanised steel spiral with polyester yarn reinforcement for suction and delivery of oils, blue diesel, ...
MERLETT
Inner diameter: 30 mm - 254 mm
Outer diameter: 33.8 mm - 261.6 mm
Pressure: 10 bar - 28 bar
... vulcanized rubber compound have been tested with oxygen at a pressure of 300 psi +/- 10 psi (2100 kPa +/- 70 kPa), and a temperature of 70 degrees Celsius +/-1 degree (158 ºF +/- 18 ºF) for a period of 96 hours, after ...
Tipsa
Inner diameter: 20 mm - 305 mm
Outer diameter: 24 mm - 313.2 mm
Pressure: 11 bar - 38 bar
... vulcanized rubber compound have been tested with oxygen at a pressure of 300 psi +/- 10 psi (2100 kPa +/- 70 kPa), and a temperature of 70 degrees Celsius +/-1 degree (158 ºF +/- 18 ºF) for a period of 96 hours, after ...
Tipsa
Inner diameter: 65 mm - 152 mm
Outer diameter: 71 mm - 159.2 mm
Pressure: 12 bar - 20 bar
... vulcanized rubber compound have been tested with oxygen at a pressure of 300 psi +/- 10 psi (2100 kPa +/- 70 kPa), and a temperature of 70 degrees Celsius +/-1 degree (158 ºF +/- 18 ºF) for a period of 96 hours, after ...
Tipsa
Temperature: -20 °C
Durable Hose-DUZ is a 3-ply nitrile rubber municipal fire hose with both the cover and liner extruded independently and double vulcanized along with high tensile strength ...
Inner diameter: 38 mm - 101.6 mm
Outer diameter: 49 mm - 113.5 mm
Pressure: 0 bar - 6 bar
... Highly flexible spiral suction and delivery hose for filling and dis-charging milk tankers, but also for use in the food and drinks industry for conveying alcoholic or non-alcoholic beverages. Feature: Extremely ...
Semperflex
Inner diameter: 19, 25 mm
Outer diameter: 31, 39 mm
Pressure: 25 bar
... electrical resistance R less than 1,000,000 Ohm Standard EN ISO 2398 Inner tube NBR Reinforcement synthetic yarn braids Cover NBR Resistant to weather, ...
Inner diameter: 20 mm - 152 mm
Pressure: 15, 17, 20, 25, 30 bar
Temperature: -30 °C - 80 °C
Excellent resistant flat hose, made of rubber, double layer of polyester insert Material: Specially-formulated black nitrile rubber, double layer. Polyester thread ...
Inner diameter: 5.4 mm - 22.2 mm
Outer diameter: 11.2 mm - 30.5 mm
Pressure: 52, 69 bar
The 200 series hose features a reinforced chlorinated Polyethylene (CPE) synthetic rubber liner, wrapped in a double stainless steel external braid for additional resistance to abrasion. Ideal for use ...
Inner diameter: 20 mm
Outer diameter: 27 mm
Pressure: 14 bar
Hose 1 1⁄4"-LP-20-01500 14 BAR is one of the Hyva Hoses with the highest safety standards. This hose has a Maximum Working Pressure of 14 bar, with an inner diameter of 1 1⁄4 and a length ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining