DN: 100 mm - 400 mm
Pressure: 0.2 bar
... in SINT engineering polymer, stainless steelor cast iron, and a pre-stressed elastomeric seal. For food applications a version with stainless steel disc and integral FDA-approved seal ...
WAMGROUP S.p.A
DN: 100 mm - 400 mm
Pressure: 0.2 bar
... over a million units operating worldwide, WAM VFS-type Butterfly Valves for powdery and granular materials represent one of the Group's most industrial products. VFS Butterfly Valves consist of two ...
WAMGROUP S.p.A
DN: 100 mm - 140 mm
Pressure: 2.5 bar
Temperature: -20 °C - 90 °C
... manufactured from die-cast aluminium, a carbon steel or stainless steel disc including shafts, and an elastomer seal. An adjusting lever or pneumatic or electric actuator can be applied ...
WAMGROUP S.p.A
DN: 4 mm - 50 mm
Pressure: 0 bar - 65 bar
Temperature: -20 °C - 150 °C
... Technologies: • - Industrial valves • - Pneumatic actuation • - Electric actuation Technical Characteristics: • - Fluids: Ail fluids • - Materials: nickel-plated brass or 430 stainless Steel, ...
Parker Legris
DN: 15 mm - 50 mm
Pressure: 7, 10, 25 bar
Temperature: -10 °C - 185 °C
... to chemicals. Long service life Easy integration of automation units with ELEMENT Flow-optimised stainless steel valve body with sleeve, clamp or weld connection
BÜRKERT FLUID CONTROL SYSTEMS
DN: 0.25 in
Pressure: 50 psi - 5,000 psi
Flow rate: 0 l/h - 23 l/h
This high pressure miniature pressure compensating flow control valve is only .250” in diameter and 1.38” in length. This valve provides a constant flow rate over a wide range of pressure differentials. ...
THE LEE COMPANY
DN: 0.281, 0.187 in
Pressure: 0 psi - 5,000 psi
... control valves are 2-way restrictors that allow a designer to specify a different metered flow rate in each direction. These valves are ideal for high-pressure hydraulic applications with system pressures ...
THE LEE COMPANY
DN: 0.375 in
Pressure: 4,000 psi
Temperature: 85 °F
... miniature valve has a maximum restriction of 70 Lohms when fully open and weighs only 16 grams. The metal components are constructed entirely of stainless steel for ...
THE LEE COMPANY
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 60 °C
Flow rate: 5 m³/h
Visual position indicator as standard Dampened closing (closes against flow direction) Suitable for contaminated flow fluids Suitable for vacuum up to max. 90% Reversed flow direction optional Medium: - Aggressive gases and liquids Port ...
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 60 °C
Flow rate: 21,590 l/min
Interchangeable for NC, NO or double acting functions Visual position indicator as standard Dampened closing (closes against flow direction) Suitable for contaminated flow fluids Suitable for vacuum up to max. ...
DN: 0.375 in - 2.5 in
Pressure: 16 bar
Temperature: 180 °C
Parker's shut-off valves are designed for the safe handling of air, gases and liquids for many hydraulic, pneumatic, instrumentation, refrigeration and aerospace applications. Our valves ensure clean, ...
DN: 15 mm
Pressure: 68 bar
Temperature: -20 °C - 200 °C
... These valves are simple to use, you move the handle by a quarter of a turn to open or close the valve. Stainless steel ball valves are used due to the ...
DN: 50 mm - 1,400 mm
Pressure: 25 bar
Temperature: -250 °C - 260 °C
Triple-offset butterfly valve, metal-seated (fire-safe), without gland packing, maintenance-free, with lever or manual gearbox, pneumatic, electric or hydraulic actuator. Body made of steel or stainless ...
KSB S.A.S. - France
Pressure: 0.5 bar - 250 bar
Temperature: -20 °C - 200 °C
WEH® Screw-in Valve TVR400, stainless steel - Series The screw-in valves of the WEH® TVR400 series are mechanical shut-off valves which allow the media ...
DN: 6 mm - 40 mm
Pressure: 1.5 bar
... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation ...
WITT-Gasetechnik
DN: 6 mm - 40 mm
Pressure: 40 bar
... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation ...
WITT-Gasetechnik
DN: 20 mm - 100 mm
Pressure: 25, 40 bar
... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard (installation ...
WITT-Gasetechnik
DN: 0.063, 0.125 in
Pressure: 0 bar - 8.6 bar
Plastic Needle Valves are an adjustable method of flow control. Internally, the pin and body create an adjustable orifice that restricts flow. Useful for instances when the exact flow rate hasn't been determined or to ...
DN: 80 mm - 400 mm
Pressure: 6 bar - 8 bar
Temperature: 0 °C - 120 °C
• Slide gate valve for solids flow on/off control, mainly used as an automatic valve for loss-in-weight feeder refill • Double acting pneumatic drive
Kubota Brabender Technologie GmbH
DN: 80 mm - 400 mm
Pressure: 6 bar - 8 bar
Temperature: 0 °C - 120 °C
• Slide gate valve for solids flow on/off control, mainly used as an automatic valve for loss-in-weight feeder refill • Double acting pneumatic drive
Kubota Brabender Technologie GmbH
DN: 80 mm - 400 mm
Pressure: 6 bar - 8 bar
Temperature: 0 °C - 120 °C
• Slide gate valve for solids flow on/off control, mainly used as an automatic valve for loss-in-weight feeder refill • Double acting pneumatic drive
Kubota Brabender Technologie GmbH
DN: 0.25 in - 2 in
Pressure: 1,200 psi
Temperature: -60 °F - 450 °F
Part Material Body - CF8M or SUS316 Body Cap - CF8M or SUS316 Bail - CF8M or SUS316 Retainer - CF8M or SUS316 Stem - SUS316 Seat - PTFE+15% GF Seal - PTFE Thrust - PTFE Stem Packing - PTFE Stem Gland - SUS304 Stem Nut - SUS304 Handle ...
Golden Mountain Enterprise
DN: 0.25 in - 2 in
Pressure: 2,000 psi
Handle Gland - Vinyl Plastic - Handle - SUS304 - C.S. Plated Stem - SUS316 - C.S. Plated Handle - SUS304 - Gland - SUS316 - C.S. Plated Packing - Glass Filled PTFE - Thrust Washer - Glass Filled PTFE - Seat - Carbon Fibre Keinf ...
Golden Mountain Enterprise
DN: 0.5 in - 3 in
Pressure: 600 psi
* Investment casting, ASTM-A351, CF8M, Class 600, inside screw and screwed bonnet wedge dise. Intégral seat, Nonrising stem, and Handwheel. Body - CF8M Bonnet - CF8M Disc - CF8M Stem - SUS316 Gasket - Teflon Snap Ring - SUS316 Washer ...
Golden Mountain Enterprise
... factors such as the flow conductance and leak-tightness of valves are of great importance. The valves of Leybold are optimized with regard to these demands. For every flange system there are a lot of ...
Leybold
DN: 0 mm - 1.5 mm
Pressure: 0 bar - 34.7 bar
... fluctuations as the needle and valve seat are both manufactured from stainless steel. Working Pressure Range: The NV is rated for a maximum inlet pressure of 500 psig. The metal ...
Beswick Engineering Co, Inc.
DN: 1 mm - 1.1 mm
Pressure: 0 bar - 13.8 bar
The MSV series slide sleeve valve provides an efficient in-line three-way valve. When the sleeve is moved to the “ON” position, fluid is allowed to pass through the valve. When the sleeve ...
Beswick Engineering Co, Inc.
DN: 0.07, 0.375 in
Pressure: 0 psi - 250 psi
... connection. Approximate Weight: 57g in stainless steel (303 & 316). Weight will vary slightly, depending on configuration. Porting: 10-32 female threaded inlet and outlet ports. Features ...
Beswick Engineering Co, Inc.
DN: 0.75, 0.562, 0.375, 0.25, 1 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C
... a high reliability of the valve. MAXIMATOR valves of the 21V series have a cold-machined stainless steel body. Valve bodies are available in six different ...
Maximator GmbH
DN: 0.11 in - 0.56 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C
... thus a high reliability of the valve. MAXIMATOR valves of the 21V series have a cold-machined stainless steel body. Valve bodies are available in ...
Maximator GmbH
DN: 0.25 mm - 14.3 mm
Pressure: 2,500 bar
Temperature: -252 °C - 650 °C
The 36V system is a stainless steel valve that can be operated using a regulating shaft. It has non-rotating stem that provides dependability, and long service lifespans of the device. ...
Maximator GmbH
DN: 6, 12, 16, 10 mm
Pressure: 0 bar - 69 bar
Temperature: -20 °C - 190 °C
BALL VALVE FOR TWIN FERRULE FITTING - STAINLESS STEEL 316
BENE INOX
DN: 10, 15, 8, 25, 20 mm
Pressure: 63 bar
Temperature: -20 °C - 150 °C
MINI BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - STAINLESS STEEL 316
BENE INOX
DN: 8 mm - 50 mm
Pressure: 55 bar
Temperature: -20 °C - 150 °C
1 PIECE BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - LOCKABLE HANDLE - STAINLESS STEEL 316
BENE INOX
Pressure: 400 bar
Temperature: -30 °C - 80 °C
... needed. Consider the following advantages: - Made in high quality hard nickel plated steel. 70 times more resistant than zinc plated steel. - Stainless Steel 316L ...
DN: 0.125 in
Pressure: 0 bar - 34.5 bar
Temperature: 0 °C - 121 °C
... brass valves; 250°F (121°C) - 316 stainless steel valves MATERIALS OF CONSTRUCTION BODY chrome plated brass or 316 stainless steel O-RINGS ...
Aalborg Instruments
DN: 3.175 mm
Pressure: 0 bar - 5.2 bar
Temperature: 0 °F - 150 °F
... PTFE material for fluids contact, and a valve spindle made in rigid CTFE. The valve spindles reduce undesirable material from PTFE. In addition, the shell made of black anodized aluminum or 316 stainless ...
Aalborg Instruments
Pressure: 0 bar - 34.5 bar
Flow rate: 28 l/min
... stepping motor valve A line of electronic two-way metering valves is presented. High precision linear stepping motors drive the valve spindle. The resolution of the stepping motor driven ...
Aalborg Instruments
DN: 0.75 in
Pressure: 0 bar - 138 bar
Temperature: 0 °C - 200 °C
... replacement valve with Brooks® purge meters. The Cartridge III Valve is a multipurpose valve, designed for use with Brooks® purge meters in gas and liquid flow applications. It is ...
DN: 4 mm
Temperature: -18 °C - 93 °C
... sensing technology • Direct valve-to-vacuum cup mount Note: These valves are designed to not seal shut completely. This purposeful small vacuum loss allows the valves to have immediate ...
DN: 8 mm - 25 mm
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 140 °C
... .500 l/h. The sealing concept of the valve is based on the GEMÜ PD design, whereby the actuator is hermetically separated from the medium. All actuator parts (except the seals) are made from stainless ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 8 mm - 25 mm
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 140 °C
... whereby the actuator is hermetically separated from the medium. All actuator parts (except seals) are made from stainless steel. The filling valve is available in pneumatic design F40 ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 6 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C
... GEMÜ 507 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel and is manually operated. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance ...
GEMÜ Gebrüder Müller Apparatebau GmbH & Co. KG
DN: 8 mm - 150 mm
Pressure: 125 bar
Ball valve for food applications according to regulation EU1935/2004, EG 10/2011 and FDA. Three-piece body, pressure rating depending on nominal size up to PN125, ball floating, vacuum-tight. Bore Full and reduced bore Special ...
GEFA Processtechnik
DN: 6 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C
... body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by laser marking ● Body materials: forged stainless ...
SISTO Armaturen S.A.
DN: 6 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C
... diaphragm ● Body designs: 2-way valve body, T-pattern, Y-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by laser marking ● Body materials: forged ...
SISTO Armaturen S.A.
... body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by laser marking ● Body materials: forged stainless ...
SISTO Armaturen S.A.
DN: 1.5 in - 6 in
Pressure: 5 bar
Temperature: 135, 140 °C
The next generation of mixproof valve technology is the result of continued development from both APV and Waukesha Cherry-Burrell process technologies. Used for the reliable separation of dissimilar fluids, the D4 Series ...
Waukesha Cherry-Burrell
DN: 38 mm - 152 mm
Pressure: 7, 10.3, 10 bar
Mixproof valves provide safe separation of dissimilar products within the same valve body. Specifications For general purpose mixproof applications, we offer the W71 Series for standard shutoff service. Materials ...
Waukesha Cherry-Burrell
DN: 12 mm - 152 mm
Pressure: 0 bar - 10 bar
Temperature: 93 °C
Valves / Butterfly Valves Butterfly Valves offer great durability and ease of use for a wide range of services. Features Easy to install and maintain, butterfly valves ...
Waukesha Cherry-Burrell
Please specify:
Help us improve:
remaining