GEMU stainless steel valves

DN: 0.25 in - 3 in
Pressure: 2,000 psi

Threaded, 2-Piece, Std. Port, Stainless Steel Ball Valve, 2000 CWP to 1", 1500 CWP to 2", 1000 CWP to 3",Sizes: 1/4" to 3" (DN 8 to DN 75)

DN: 60 mm - 400 mm

Throttle valves, hand-operated Throttle / Shut-off valve without a seal and hand operated Größere Durchmesser auf Anfrage Zur manuellen, stufenlosen Regulierung von Strömungen

DN: 0.5 in - 2 in
Temperature: -10 °C - 200 °C

... CF3M) Actuator body material: Polyamide PA6 (reinforced fibreglass 30%) Seal material: PTFE Position indicator as standard Valves DN32÷DN50 complying with 97/23/EC Directive Category

DN: 12 mm

This is the LBS-PN 64 series of ball valves from FG Inox. It is engineered from an AISI 316 stainless steel and is made with a female threading type on both ends. The series comes in ...

DN: 25 mm - 300 mm
Pressure: 15 MPa
Temperature: -20 °C - 60 °C

... cutting model, high accuracy and long life ◆Valve plate and stem is above the runner in opening condition, no bear flow and no accumulate debris, long life ◆More higher pressure, better closing when the valve ...

DN: 80 mm - 1,200 mm
Pressure: 10 bar - 100 bar
Temperature: 600 °C

Somas butterfly valves helps to control your flow! Steam, gas, water or other fluids, Somas butterfly valves can handle them all. The valves are made of high quality stainless ...

DN: 25 mm - 150 mm

The "Monopok" valve is a 1/4 turn ball valve shutoff, with full waterway, made of an aluminium alloy section heat-treated. The whole is machined on a computerised and automated machine tool, which guarantees ...

Pressure: 150 bar

... Isolation Valve provides a solution for vital explosion isolation applications. It operates in milliseconds to provide a mechanical barrier within a pipeline. The High-Speed Isolation Valve has a stainless-steel ...

DN: 13.5 mm - 60.3 mm
Pressure: 0 bar - 10 bar

AVCON Hand Operated Valves, Type 6227M are available in following configurations. 6227MXX6 Spigot weldable end to ISO 4200 & BS 4825. 6227MXX7 Tri-Clamp body to ISO 2852-1993(E). 6227MXX3 Spigot butt weld. Application ...

These AWH butterfly valves are synonymous with quality, reliability and high hygiene standards. Supplemented with a comprehensive range of accessories, these valves therefore offer the ideal solution ...

DN: 50 mm
Pressure: 10 bar
Temperature: -20 °C

The sampling valve 125A is standard DN50 sampling valve by FAMAT. It is used for sampling of powders, granules, pastes and liquids under process conditions in the pharmaceutical, chemical and food industries.

DN: 28 in - 40 in
Pressure: 110 psi
Temperature: 175 °F

... each side of the valve for lower bolt tightening torque. Stem shall be of 304 stainless steel non wetted, 2-piece design fully engaging with the disc. Valves shall have ...

DN: 8 mm - 50 mm
Pressure: 138 bar
Temperature: -20 °C - 160 °C

Barstock ball valve monobloc type class 800 in stainless steel A479 316/316L, full bore, F/F ISO 7/1 threading or F/F NPT, Fire safe, Antistatic device.

DN: 0.5 in - 12 in
Pressure: 100 psi - 290 psi
Temperature: -29 °C - 316 °C

... Body & Plug Carbon Steel, Stainless Steels, Duplex Stainless Steels, Monel, Inconel, Hastelloys, Titanium, Zirconium, etc. Sleeve PTFE, RPTFE, ...

DN: 0.125, 0.25, 0.375, 0.063 in
Pressure: 10,000, 15,000 psi
Temperature: 650, 450, 350, 200 °F

... Materials include high tensile type 316 stainless steel for the valve body and hardened 17-4PH stainless steel lower section stem. Air operators ...

DN: 0.5 in - 10 in

Ball valves have 4 different types of bodies: Welded: they guarantee the absence of leaks during the valve lifetime and do not require operational maintenance. This can be a very important ...

DN: 0.5 in - 2 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 200 °C

... WITHOUT TOOLS Description Indumart Series PVS100 Pressure Actuated Angle Seat Valves are ideal for on/off flow control of most fluids compatible with bronze or stainless steel. Tight ...

DN: 0.25, 0.375, 0.5, 0.75 in
Pressure: 0 bar - 350 bar
Temperature: -20 °C - 130 °C

The ZFT2251B series from Dicsa has a body made out of AISI 316 Stainless Steel and a needle made out of X 10 Cr Ni S 1809. It has a PTFE antiextrusion ring and a handwheel made out of GD Al SI 12. It ...

... Specification OEM service for Valve body casting Investment Casting Lost Wax Casting Precision Casting CNC Maching Material: Ductile Iron, Cast Iron, Carbon Steel, ...

DN: 15 mm - 900 mm
Pressure: 1,600,000 Pa - 42,000,000 Pa
Temperature: -196 °C - 380 °C

Ball Valve Body materials: carbon steel, stainless steel, alloy steel WCB, LCB, CF3, CF3M, CF8, CF8M, MONEL, and more. Valve Ball type: ...

DN: 15 mm - 800 mm
Pressure: 20 bar - 420 bar
Temperature: -50 °C - 200 °C

Side Entry Valves suitable for Oil & Gas production, processing, transportation, distribution, chemical and petrochemical refining including system isolation, pressure level and flow measurement, instrument drain, ...

DN: 25 mm - 150 mm
Pressure: 0 bar - 10 bar

Inexpensive shut-off fitting in the hygienic product and CIP section Solidly designed valve disk Safe guidance of the disk thanks to bushes in the housing Seal with a small volume and extension gaps for compensating ...

DN: 10 mm - 65 mm
Pressure: 16 bar
Temperature: -10 °C - 200 °C

Farbo presents a new pneumatic globe valves series. The body in stainless steel makes new valves suitable for all applications which require aggressive fluids and performances ...

DN: 65 mm - 600 mm
Pressure: 16 bar
Temperature: -10 °C - 110 °C

Material - Stainless Steel Typology - Static balancing, Metering station Connection - Wafer Stainless steel Wafer metering station For EN1092 PN16 flanges Design ...

DN: 15 mm - 125 mm

Suitable for use in industrial chemical complexes, for gas and water distribution and food industry Body material from bar (A 105 or AISI 316) Thread ball body-cover Flanges drilled acc.to ANSI Possibility of equipment with handlever, ...