Flow: 35, 40, 50 l/min
Head: 55, 46, 38 m
Power: 0.6, 0.52, 0.37 kW
... water di stribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid impurities. LIMITS ...
Speroni
Flow: 35 l/min
Head: 38 m
Power: 0.37 kW
... water di stribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid im pu rities. LIMITS ...
Speroni
Flow: 40, 60 l/min
Head: 38, 58 m
Power: 0.37, 0.6 kW
... water di stribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid impurities. LIMITS ...
Speroni
Flow: 10 l/h - 750 l/h
Pressure: 0.3 bar - 6 bar
Fluid temperature: 5 °C - 40 °C
The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 1,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C
The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 10 l/h - 2,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C
The distinguishing feature of our proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 5,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 0.7 kW
... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components • Polypropylene (Moplen) pump ...
OMG sas di Gibogini Stefano e C
Flow: 25,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 4 kW
... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components. • Polypropylene (Moplen) pump ...
OMG sas di Gibogini Stefano e C
Flow: 5,000 l/h
Pressure: 1.8 bar
Power: 0.7 kW
... bar): ca. 1,8-2 N.B. The filter pumps of the series CESE marked with the letter “M” are equipped with a magnetic entrainment pump, which is designed without mechanical seal. This constructional feature ...
OMG sas di Gibogini Stefano e C
ALLOWS THE DESIRED QUANTITY OF SERUM WITH ABSOLUTE PRECISION AND GRADUALITY TO BE DISTRIBUTED INSIDE THE DOUBLE FILLERS. An optimal system, which docs not altor tho charactoristics of tho sorum graft. Equipped with remote control, ...
Flow: 0 l/min - 1.5 l/min
Fluid temperature: -60 °C - 120 °C
Length: 210 mm
... tubing size based on the following chart. Support manual mode Support fully automatic cycle Semi-automatic cycle Manual start/stop Speed control Basic Parameters Current: 2A max Pump ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.12 l/min - 1.52 l/min
Small volume, high flow Easy to replace the pump tube Stainless steel rotor, long life Stepper motor, precise control Suitable for viscous and non-viscous liquid transfer The wall thickness of the ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.001 l/min - 0.485 l/min
Pressure: 0 bar - 2 bar
Head: 2 m
... 485ml/min.(For intermittent work only) 300RPM supports continuous working mode Easy to operate, can quickly replace the pump tube; High precision, low noise, simple structure, maintenance-free Two tube clamp ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Pressure: 100,000 psi
Fluid temperature: 5 °C - 40 °C
Length: 84 in
Cutting speed increased 50% Cost savings 28% Cutting metal thickness 300mm Motor Rating:45kw/60HP Pressure Range (Deadhead):90,000psi(6200 bar) Flow Rate at Max. Pressure:0.78 gal/min Attenuator Volume:2L Length:83.7in Width:53.7in Height:59.3in
WIN-WIN WATERJET CO.,LTD.
Flow: 7.6 l/min
Pressure: 420 MPa
Power: 100 ch
1 PUMP DRIVE 5 CUTTER HEADS INTENSIFIE PUMPS CAN OPERATE A LOW TEMPERATURES IN HIGH-TEMPERATURE ENVIRONMENTS 10 YEARS, TECHNICAL BREAKTHROUGH Motor Rating：75kW/100HP Pressure Range (Deadhead) ：60,000psi Flow ...
WIN-WIN WATERJET CO.,LTD.
Flow: 3.8 l/min
Pressure: 320 MPa - 380 MPa
Power: 50 ch
Adopt servo motor Save on costs 30% Dual intensifier, continuous operation for 24 hours Motor Rating：37kW/50HP Pressure Range (Deadhead) ：60,000psi Max. Flow Rate at Max. Pressure (60 Hz)：1.00gal/min Attenuator Volume：2L Length：67.7in Width：45.6in Height：59.3in
WIN-WIN WATERJET CO.,LTD.
Flow: 0.002 l/min - 1 l/min
Power: 20 kW
Length: 190 mm
SP 311 Peristaltic Pumps Peristaltic pumps ideal for transferring gas, liquids, mixtures and emulsions in various industries. Easy to use and Reliable • Minimum maintenance (just replace the tube) • ...
Flow: 45 l/min
Pressure: 2 bar - 6 bar
Input diameter: 1.5 in
... supply / transfer with recirculation PUMP PERFORMANCE Ratio: - 8:1 b Max cycles / minute: - 60 Displacement per cycle: - 757 civil code Air consumption @ 6 bar: - 2700 Nlpm PUMP SPECIFICATIONS Lower ...
Airmation ECP srl
Flow: 8.4 l/min
Pressure: 2 bar - 6 bar
Output diameter: 0.8 in - 1 in
... Max Rec'd Cycles / Minute - 90 Displacement Per Cycle - 120cc Air consumption @ 6 bar - 280 Nlpm SPECIFICATIONS: Lower Pump Material - Stainless Steel Pumping stem material - Stainless Steel Hard Chrome opt. ...
Airmation ECP srl
Flow: 8.4 l/min
Pressure: 2 bar - 6 bar
Output diameter: 0.8 in - 1 in
... Max Rec’d Cycles / Minute - 90 Displacement Per Cycle - 120 cc Air consumption @ 6 bar - 280 N.l.p.m. SPECIFICHE: Lower Pump Material - Stainless Steel Pumping stem material - Stainless Steel Hard Chrome opt. 316 ...
Airmation ECP srl
Flow: 60, 80 l/min
Pressure: 14,700 Pa
Power: 39, 58 W
Pressure type Easy restart by micro swith Two directional control valve No need of grounding Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Air injection for bubble bath • Small ...
HIBLOW
Flow: 80, 40, 60 l/min
Pressure: 12,800, 14,700 Pa
Power: 39, 58, 30 W
... control “Dust trap filter” Easy restart by micro swith (XP-60 / 80 only) No need of grounding Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Air injection for bubble bath • Small ...
HIBLOW
Flow: 18, 20 l/min
Pressure: 9,800 Pa
Power: 17 W
Pressure type Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Bubble bath (air bubble injection) • Oxygen supply for fish breeding
HIBLOW
Flow: 2,800 m³/h
Fluid temperature: 180 °C
... thermal shock. The CUP-BB5V range has been designed to produce an advanced pump with reduced whole life costs. All the pump internals can be withdrawn quickly without disturbing pump ...
CELEROS
Fluid temperature: 230 °C
... Category: BETWEEN BEARINGS CUP-BB3 pump is a heavy duty, axial split case, horizontal pump with opposing impellers..... The ClydeUnion Pumps CUP-BB3 pump is a ...
CELEROS
Flow: 2,800 m³/h
Fluid temperature: 180 °C
... radially split pump Product Category: BETWEEN BEARINGS CUP-BB5HP encompasses heavy duty, radially split diffuser type multi-stage pumps..... The ClydeUnion Pumps CUP-BB5HP encompasses ...
CELEROS
Flow: 0.03 l/min - 1 l/min
Pressure: 0 bar - 2.5 bar
Input diameter: 0.3 mm - 6.4 mm
LabDos® peristaltic pumps are displacement pumps on which rollers force the medium which is to be fed through a hose from the outside. The fed material thus does not come into contact with metal parts ...
KD Scientific's Infusion Syringe pumps are suitable for transporting accurate amounts of liquid for numerous syringe pump operations. These applications include the infusion of calibrant into a mass spectrometer ...
KDS
Flow: 40, 74, 38 l/min
Length: 250 mm
Width: 140 mm
High performance standards 100% Oil-free Ultra-High flow rate for quicker operation Excellent gas sealing / Contamination free Long reliable service life Low power consumption and noise level
Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm
The PCP 005 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or fill a determinated ...
DAV TECH Srl
Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm
The PCP 015 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or fill a determinated ...
DAV TECH Srl
Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm
The PCP 050 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or fill a determinated ...
DAV TECH Srl
Flow: 0.26 l/min - 8.5 l/min
Pressure: 50 bar - 700 bar
Length: 526 mm
The UPMD725 RC pump is a double-acting air-hydraulic pump with double pneumatic motor, pneumatic RC drive and 4/3 lever distributor hand valve Equipped with a pressure gauge, the oil ...
Description USB connectable plug&play syringe pump for jfermi bioreactor
Flow: 0.0007 l/h - 0.02 l/h
Peristaltic pump peristaltic, pump, jFermi, 3D, modelperistaltic, pump, jFermi, 3D, model $300.00 Additional or replacement pump (Feed/Acid/Base/Antifoam) for ...
Flow: 52, 130, 375, 715 l/min
Pressure: 8 bar
Fluid temperature: -40 °C - 70 °C
ASTRAsolid (DDS) pumps share the same constructive and performing advantages as ASTRAevo pumps: a fast pneumatic exchanger increased unloading systems for performance optimization (without interfering ...
Argal Pumps
Flow: 9 l/min - 715 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
ASTRAevo range is the ideal solution for most industrial applications. The pumps are conceived with the latest technologies to guarantee higher reliability of the pump, a longer life cycle of the diaphragms, ...
Argal Pumps
Flow: 450 l/min
Pressure: 8 bar
Head: 70 m
The original air-operated double diaphragm QUANTUM pumps are special for their optimized performance and unique advantages that traditional AODD pumps do not have. Solid-block construction made of pure ...
Argal Pumps
Flow: 3,200 m³/h
Pressure: 90 bar
Head: 480 m
... overhung process pump, designed and built in accordance with the latest edition of API 610 (OH2 type), and with over 130 hydraulic combinations available. Overview Designed for all fluids and process conditions, the ...
RUHRPUMPEN
Flow: 366.5 m³/h
Pressure: 1,100 bar
Fluid temperature: -40 °C - 200 °C
... The RDP series of Reciprocating Plunger Pumps is suitable for handling most liquids for Oil & Gas, Industrial and Wastewater Treatment applications. RP's RDP pump series are a type of positive displacement ...
RUHRPUMPEN
Flow: 250 us gal/min - 5,000 us gal/min
Pressure: 40 psi - 519 psi
... multi-stage, turbine pumps for firefighting applications. UL listed and FM approved pump for suction lift conditions. Available with diesel or electric drive. Overview Ruhrpumpen's vertical turbine ...
RUHRPUMPEN
Flow: 1.3 l/min
Pressure: 7, 238 bar
Weight: 16 kg
Larius is expert in high pressure industrial spray technology equipment for demanding protective coating airless application. The Vega 34:1 is an high pressure pneumatic spray package, robust and resistant, for industrial painting ...
LARIUS SRL
Flow: 3.8 l/min
Pressure: 210, 7 bar
Weight: 25 kg
... equipped with a series of professional and performing accessories to ensure the maximum efficiency: the AT250 airless spray gun, compact and easy to handle, guarantees a high volume production; the airless hoses, available ...
LARIUS SRL
Flow: 3 l/min
Pressure: 6.5, 260 bar
Weight: 25 kg
... equipped with a series of professional and performing accessories to ensure the maximum efficiency: the AT250 airless spray gun, compact and easy to handle, guarantees a high volume production; the airless hoses, available ...
LARIUS SRL
Flow: 10 l/min
... solvent pump engineered by Burkle, is a hand operated barrel pump, suitable for the withdrawal of organic solvents and flavoring components. This device features a gas tight construction ...
Bürkle
Flow: 20 l/min
... air filters for ultra-pure drawing-off available as accessory Barrel pump for solvents with discharge hose and stopcock made of stainless steel/PTFE. Solvent pump foot operated ...
Bürkle
Flow: 4 l/min - 30 l/min
OTAL container pumps are characterized by its basic stopper system that can be used in most common containers. During the pumping process, only the tube comes in contact with the liquid. This means that liquids that are ...
Bürkle
Flow: 56 l/min
Power: 220 W
EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • with anti-siphon device • 4 m supply hose as standard • additional hose from 6 to 10 m - ...
Eurial
Flow: 40 l/min
EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • built-in protection filter • 4 m supply hose as standard • additional hose from ...
Eurial
Flow: 50 l/min
EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • built-in protection filter • 4 m supply hose as standard • additional hose from 6 to 10 m ...
Eurial
Flow: 2 l/min
Weight: 490 g
... measurements are performed. In addition, the personal sampling pump In addition, the Apex2 personal sampling pump has an exceptional back pressure capacity. The Casella Apex2 air sampling pump ...
Weight: 1.4 kg
CleanAir dual head peristaltic pump, 3 roller design, 120 Vac. (Ref 9771-BA) Model number 9771-BA is used in Clean Air's SGC-4000 and MAK 6-2 Pump Model Number: Clean Air Dual Head Peristaltic Pump, ...
Flow: 27 l/min
Fluid temperature: 205 °C
Length: 31 cm
... important data. The heated in-line filter and pump assembly helps ensure the accuracy of gas samples by providing a heated path for the gas prior to analysis. The filter, stainless steel needle valve and pump ...
Flow: 1 m³/h - 12 m³/h
Pressure: 10 bar
... flanged vents, supplied with threaded connectors for the controlling of gauges. The wet rotor electronic circulator pumps are built with a pump body enclosed in cast iron, with its motor casing in a ...
DAB
Flow: 0.7, 1.1, 14, 1.6, 2.41 l/min
Pressure: 1,750, 2,800, 805, 1,260, 140 bar
High Pressure hydropneumatic pumps have to make effort tests on components for high pressure. For having a pumping system able to make more than 100.000 pumping cycles in few weeks, for these pumps ...
Flow: 0 us gal/min - 5 us gal/min
Length: 191 mm
Width: 139 mm
... of the quietest and most compact pumps in its class Available in Polypropylene, PVDF (Kynar ®), and conductive Acetal (ATEX Compliant). Conductive Acetal units can be grounded for pumping volatile ...
Versa-Matic
Flow: 0 us gal/min - 6.8 us gal/min
Weight: 1.4, 2.04 kg
Small yet powerful, Versamatic’s ⅜" (10mm) bolted plastic air-operated double-diaphragm (AODD) pump can pump up to 6.8 gpm (26 lpm). Featuring a patented air valve system, count on ...
Versa-Matic
Flow: 0 m³/h - 12 m³/h
Length: 215 mm
Width: 185.75 mm
... AODD pump, along with the ½" bolted plastic pump, features: A corrosion-resistant air section On/off reliability Durable and long-lasting construction Extended-life diaphragms ...
Versa-Matic
Please specify:
Help us improve:
remaining