- Hydraulics - Pneumatics >
- Pump >
- Water treatment pump >
- Grundfos
Grundfos water treatment pumps
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Flow: 1,100 l/h
Pressure: 28 bar
... is a rugged, industrial grade of metering pumps designed for applications up to 290 gph (1,100 l/h) at pressures up to 406 psi (28 bar). Its cast iron housing with chemical resistant coating enables the pump ...
Milton Roy
Flow: 0 l/h - 200 l/h
Pressure: 0 bar - 16 bar
Fluid temperature: -10 °C - 50 °C
... Industrial wastewater treatment & reuse Solar Controls & Digital Water Management Solar Water Treatment Fertigation & Dosing Community ...
GRUNDFOS
Flow: 6 l/h - 65 l/h
Pressure: 7 bar
Power: 50 W
... peristaltic metering pump to the ProMinent product range. ProMinent is making use of its decades-long experience in the metering pump sector to bring together the best of two worlds. Valve-free metering ...
ProMinent Group
Flow: 5.1 l/h - 410 l/h
Pressure: 2, 4, 8 bar
Power: 400 W
... metering with peristaltic pumps. The new metering pump DFYa, the big brother of the DFXa, adds an intelligent peristaltic pump to the top capacity range of the ProMinent portfolio. The ...
ProMinent Group
Flow: 0.74 l/h - 32 l/h
Pressure: 2 bar - 25 bar
Fluid temperature: -10 °C - 45 °C
Solenoid-Driven Metering Pump Beta All-purpose solenoid-driven metering pump for metering liquid media in water treatment and chemical processes: Solenoid-driven ...
ProMinent Group
Flow: 2,700 m³/h
Pressure: 7 bar
Head: 15 m
Product Brand TKL™ Type Overhung Pumps SubType Industrial Process Pumps The MVE mixed-flow, single-stage volute pump is designed to deliver high volume flow at low to medium heads. ...
FLOWSERVE
Flow: 8 l/s - 4,500 l/s
Power: 500 kW
... too far from the maximum value. PA Archimedean Water Screw Pumps are used in waste water treatment, in drainage and irrigation applications, in the food packaging industry, ...
Flow: 120 l/min
Head: 26 m
With the Drum pump F/FP 425 there is less than 0.05 l residual amount left in a 200 l drum, so maximum 0.02 %. The pump has an integrated backflow valve that is easy to close before taking the pump ...
Flow: 21 l/min
Head: 5.6 m
The small drum pump JUNIORFLUX with fixed motor FEM 3070 is especially suitable for pumping comparably small quantities out of containers such as canisters or drums of up to 200 litres. ...
Flow: 0 us gal/min - 285 us gal/min
Pressure: 0 psi - 120 psi
Head: 20'06"
NEW ARO AIR OPERATED DOUBLE DIAPHRAGM PUMP! 3” NON-METALLIC PUMP MODEL ARO® EXP Series diaphragm pumps now include new 3” non-metallic models available in polypropylene or PVDF. The ...
ARO, Ingersoll Rand
Flow: 200 l/min
Pressure: 1 bar - 8 bar
1” non-metallic diaphragm pump The ARO nonmetallic 1” PD10P-XXS-XXX compact pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. It ...
ARO, Ingersoll Rand
Flow: 0 l/min - 467 l/min
Pressure: 1 bar - 8 bar
1”1/2 non-metallic diaphragm pump The ARO nonmetallic 1”1/2 PD15P-XXS-XXX air operated diaphragm pump is a favorite of OEMs everywhere around the world. It is designed to be fully corrosion resistant. ...
ARO, Ingersoll Rand
Flow: 0 l/min - 18.9 l/min
Pressure: 0 psi - 100 psi
Fluid temperature: 82 °C
Our Husky air-operated double diaphragm pumps are loaded with features to help you get the job done right, every time, and are built to save you money. The Husky 205 air-operated diaphragm pump features ...
Flow: 0.1 m³/h - 6,700 m³/h
Pressure: 16 bar
Head: 0.1 m - 3.5 m
... Recirculating activated sludge from the nitrification to the denitrification stage of activated sludge tanks Economic handling of stormwater, river water, surface water ...
KSB S.A.S. - France
Flow: 24 l/min
Pressure: 7 bar
Head: 70 m
Flow: 55 l/min
Pressure: 8 bar
Head: 80 m
Flow: 110 l/min
Pressure: 8 bar
Head: 80 m
Flow: 825, 800 m³/h
Head: 129 m
Power: 90 kW
STANDARDISED MONOBLOC ELECTRIC PUMPS An incredibly extensive and efficient range which provides a flexible response to market requirements thanks to the numerous versions available with incredible delivery times. Compact ...
Pressure: 10, 30 bar
ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely ...
Flow: 0.35 l/min - 0.5 l/min
Pressure: 30 mbar - 350 mbar
The Bimor’s driving force, the bimorph, comprises two parallel piezoelectric wafers. Their nature is to expand or contract depending on the direction of the voltage. Therefore, when an alternating current is applied, one wafer expands ...
Nitto Kohki Europe
Flow: 0.4 l/min
Pressure: 100 mbar
Operating principle The Bimor’s driving force, the bimorph, comprises two parallel piezoelectric wafers. Their nature is to expand or contract depending on the direction of the voltage. Therefore, when an alternating current is applied, ...
Nitto Kohki Europe
Flow: 0.01 l/min
The Bimor’s driving force, the bimorph, comprises two parallel piezoelectric wafers. Their nature is to expand or contract depending on the direction of the voltage. Therefore, when an alternating current is applied, one wafer expands ...
Nitto Kohki Europe
Flow: 57 m³/h
Pressure: 2 bar
Head: 0 m - 12 m
... Submersible pump for stationary and portable wet well installation. Pump with fitted float switch for fully automatic operation. Liquids For the pumping in domestic areas of: Sewage not containing ...
Flow: 4 m³/h - 150 m³/h
Pressure: 18, 24 bar
... time required so far. NEMO® progressing cavity pump: Save costs due to FSIP® design In block construction with a flanged drive, this NEMO® pump is particularly compact and economical. ...
NETZSCH Pumps & Systems
Flow: 0.0024 m³/h - 300 m³/h
Pressure: 8, 24, 12, 18 bar
... progressing cavity pump even difficult substances can be conveyed gently and with low pulsation, regardless of fluctuations in pressure and viscosity. Low costs with the NEMO® BY progressing cavity pump In ...
NETZSCH Pumps & Systems
Flow: 0.003 m³/h - 350 m³/h
Pressure: 72, 60, 48, 36, 24 bar
... The pump is ideally suited for high-pressure applications. Four different rotor/stator geometries are available, enabling the pump to be customized perfectly to your application case. Furthermore with ...
NETZSCH Pumps & Systems
Flow: 0 l/s
Pressure: 0 bar
Head: 0.5 m - 75 m
ZUG V VORTEX Cast iron vortex impeller Full free passage Soiled biological liquids and non-strained wastewater Suitable for civil pumping stations and lifting wastewaters in livestock farms and industrial plants
Zenit
Flow: 401, 462 l/min
Head: 10.2, 11.6 m
Power: 0.3 kW - 0.74 kW
... seals in silicon carbide and alumina graphite in oil sump, and V-ring in direct contact with the liquid. Ecological dry motor. Pump body in single casting with motor casing.
Zenit
Flow: 0 l/min
Pressure: 0 bar
Head: 1 m - 15.3 m
... opposing silicon carbide mechanical seals in oil sump, and V-ring in direct contact with the liquid. Ecological dry motor. Pump body in single casting with motor casing.
Zenit
Pressure: 0 bar - 0.772 bar
... tubing life. Each pump comprises a front panel with controls, a pump head, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump ...
Flow: 1 l/min - 7.4 l/min
Pressure: 0 bar - 0.772 bar
... tubing life. Each pump comprises a front panel with controls, a pump head, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump ...
Flow: 0 m³/h - 0.078 m³/h
Pressure: 0 bar - 0.869 bar
... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...
Flow: 0.5 l/h - 15 l/h
Pressure: 3 bar - 16 bar
Power: 10 W - 29 W
Simple dosing pump in newest generation The MAGDOS LB solenoid-diaphragm dosing pump is a good-value alternative for simple and continuous dosing tasks. It is especially suitable for water ...
Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m
Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...
Flow: 0 l/s - 8,300 l/s
Pressure: 6, 4 bar
Head: 0 m - 10 m
... typical pump for large capacity at low discharge heads (circulation pump with axial impeller). Available in welded or cast construction with reinforcing ribs. Applications Crystallisation plants Vaporisation ...
Flow: 0 l/s - 1,100 l/s
Pressure: 0 bar - 16 bar
Head: 0 m - 140 m
... Self-cleaning impeller profile EOA / EOSA waste water pumps are optimised for fluids with high levels of solids and fibres. The EOA series for untreated wastewater with a free passage ...
Flow: 105 l/h - 54,000 l/h
Pressure: 16, 7.5 bar
Fluid temperature: 80, 90 °C
... Hose pump will handle your toughest pumping needs — from abrasive and aggressive to shear-sensitive and viscous fluids. Abaque pumps currently operate in some of the most demanding environments including ...
Flow: 4 m³/h - 17 m³/h
Pressure: 5 bar - 15 bar
Power: 7 kW - 11 kW
... 70 dB at 1 meter Typical applications: WATER TREATMENT: lime cream, ferrous chloride, activated carbon, reagent feed, coagulant, flocculate dispersion, alum, sludge & foams MINERAL ...
Albin Pump
Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW
... dB at 1 meter Typical applications : WATER TREATMENT : lime cream, ferrous chloride, activated carbon, reagent feed, coagulant, flocculate dispersion, alum, sludge & foams MINERAL ...
Albin Pump
Flow: 1.7 m³/s - 17.1 m³/s
Pressure: 7.6, 6.9, 3.4, 4.5 bar
Power: 0.18 kW
PERISTALTIC METERING PUMP (KM2) - ALBIN PUMP Specifications: Flow rate: up to 65 l/h (17 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control ...
Albin Pump
Flow: 48, 40 m³/h
Pressure: 16 bar
Head: 135 m
... centrifugal pump The pump is a two-stage vertical centrifugal pump equipped with stainless steel shaft, mechanical shaft seal, and closed impeller. Applications: • Boiler water ...
Flow: 40, 48 m³/h
Pressure: 16 bar
Head: 135 m
... centrifugal pump The pump is a two-stage horizontal centrifugal pump equipped with stainless steel shaft, mechanical shaft seal, and closed impeller. Various application such as ...
Flow: 0 l/min - 950 l/min
Pressure: 1 bar - 8.5 bar
Head: 80 m
... flow rate and pressure. If a valve is closed the pumps can handle this without problems. The TC-X pumps can operate dry and generate relatively high Vacuum Pressure, so the pump ...
IWAKI Europe GmbH
Flow: 1 l/min - 80 l/min
Head: 28, 20 m
Power: 0.37 kW - 0.55 kW
The MMP series is characterized by the heat and pressure resistance. The bearing made of SIC-D supports the reliability and the freedom from maintenance. High and low temperature media can be transfered without any problems.
IWAKI Europe GmbH
Flow: 4 l/min - 79 l/min
Pressure: 1 MPa
Head: 50 m
... characteristics of the MEK series. The pumps are appliable in diverse applications with a variety of chemicals. The sealless, corrosion-resistant and leakage-free construction are special features of these pumps. ...
IWAKI Europe GmbH
Flow: 26.5 l/min - 1,000 l/min
Pressure: 1.5 bar - 8 bar
Head: 8 m
... advantages of our PIVOT Series AODD pumps are: • Air motor with exclusive frictionless pivot-shaft air valve resulting in: o Larger flow delivery o Smooth pump operation o Reduced flow pulsation ...
SAMOA Industrial, S.A.
Flow: 210 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m - 8 m
... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller System ...
SAMOA Industrial, S.A.
Flow: 200 l/min
Pressure: 1 bar - 8 bar
Head: 8 m
... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller System ...
SAMOA Industrial, S.A.
Flow: 0 l/h - 13,000 l/h
Pressure: 0 bar - 10 bar
Fluid temperature: 0 °C - 80 °C
... combined with the latest peristaltic hose technology results in a heavy-duty pump for the most demanding applications. The EZstrip hose pump is a heavy-duty peristaltic pump with extra-large ...
NOV Inc.
Flow: 225 m³/h
Pressure: 24 bar
Fluid temperature: -10 °C - 100 °C
... solids-entrained multiphase fluids such as drilling muds, drill cuttings and produced waters need to be transferred with a steady flow and low shear. The new API 676 EZstrip™ pumps provide a practical, ...
NOV Inc.
Flow: 0 l/h - 72,000 l/h
Pressure: 0 bar - 36 bar
Fluid temperature: -10 °C - 110 °C
... progressive cavity pump MIP system that will dramatically improve efficiencies in maintenance and decline interruptions. This new shorter, lighter and lower pumping package provides the solution for mines that have a ...
NOV Inc.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining