- Hydraulics - Pneumatics >
- Valve >
- Hydraulic check valve >
- HAWE
HAWE hydraulic check valves
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
DN: 0.125 in
Pressure: 1,000 psi
Temperature: 32 °F - 230 °F
Check Valve, 1/8 Ports Notes Not intended for pressure relief Additional Information Air Flow 20 scfm @ 50 psig; 36 scfm @ 100 psig; 580 l/min @ 6 bar Force Cracks at approximately 1/2 psig Max PSI 0-300air/0-1000hyd Mount Direct ...
DN: 0.25, 0.375 in
Pressure: 300 psi
Temperature: 32 °F - 230 °F
Four varieties of check valves are offered by Clippard. Each permits flow in one direction only. All have brightdipped brass bodies that provide inline mounting, Nitrile seals and stainless steel ...
DN: 10 mm
Pressure: 0 bar - 315 bar
Temperature: -30 °C - 80 °C
Size 10; A1 → A2, B1 → B2 or A2 → A1, B2 → B1; mechanically actuated Industrial hydraulic valve in a high performance range. Reliable throttling of the flow to setting value. Spindle with internal ...
Bosch Rexroth - Industrial Hydraulics
Check valves for flow control valve SF-G02 and throttle valve ST-G02 to be stacked below SF-G02 or ST-G02.
Daikin PMC
DN: 1.3 mm - 54.9 mm
Pressure: 420, 500, 700 bar
Temperature: -40 °C - 80 °C
The check valve type RK and RB can be screwed in. The spring-loaded ball check valve type RK and RB is very robust and insensitive to soiling. The check ...
HAWE Hydraulik SE
Pressure: 700, 500 bar
Temperature: -40 °C - 80 °C
Flow rate: 20, 35 l/min
The check valve type RC can be screwed in. The spring-loaded plate valve type RC can be screwed-in in any direction and is particularly suitable for fast switching sequences. Features ...
HAWE Hydraulik SE
DN: 12.5 mm - 32 mm
Pressure: 500, 400, 450 bar
Temperature: -40 °C - 80 °C
The check valve type RE can be screwed in. Type RE is a plate valve without a spring. Type RE is suitable for isolating pressurising loads or as a foot valve for a ...
HAWE Hydraulik SE
DN: 8, 5.5, 6 mm
Pressure: 400, 280 bar
Temperature: -40 °C - 149 °C
Standard Lee shuttle valves are available in three models: a 5.5 mm, 2.1 GPM* model; an 8.0 mm, 4.8 GPM* version; and our new 400 Bar valve. The new 400 Bar Shuttle Valve is just 6 mm ...
THE LEE COMPANY
DN: 0.125 in - 1 in
Pressure: 0 bar - 551.6 bar
Temperature: -85 °C - 225 °C
... line-up of poppet-style check valves offers exceptionally high flow capacity for their size compared to ball-style valves. In some cases, the poppet-style valve provides ...
THE LEE COMPANY
DN: 0.187, 0.25, 0.375, 0.5 in
Pressure: 0 psi - 5,000 psi
Flow rate: 0 l/min - 45.42 l/min
... miniature, zero-leak check valve is only 0.187 inches in diameter and 0.63 inches in length. This check valve utilizes an elastomeric seat material to provide zero leakage ...
THE LEE COMPANY
DN: 3, 4, 5, 6 mm
Pressure: 0 bar - 250 bar
Temperature: -40 °C - 200 °C
WEH® Check Valve TVR200-S1 stainless steel, 0 - 250 bar - Product family The WEH® TVR200 Check valves made of stainless steel are ideal for applications with liquid ...
DN: 4 mm - 50 mm
Pressure: 0 bar - 300 bar
Temperature: -20 °C - 300 °C
Check Valve TVR60-S1, steel, 0 - 300 bar - Product family The TVR60 check valves of galvanised steel are specially designed for applications with hydraulic ...
DN: 8 mm - 50 mm
Pressure: 0 bar - 40 bar
Temperature: -20 °C - 100 °C
Check Valve TVR61-S1, brass, 20 - 40 bar - Product family The TVR61 check valves of brass are designed and perfectly suited for hydraulic and pneumatic ...
DN: 6, 12, 10 mm
Pressure: 10, 16 bar
... securely prevents backflow or back siphonage contamination risks up to Fluid Category 2 John Guest push-fit acetal single check valve provides protection from the reversal of flow or back siphonage ...
DN: 0.88 mm - 3.2 mm
Pressure: 0 psi - 250 psi
... cracking pressures around 0.5 psig. Check valve elements are typically actuated by reverse pressure and are best suited for applications with over 5 psig of back pressure. If the valve ...
DN: 38.1, 50.8, 63.5, 76.2 mm
Valves / Check Valves Ball Check Valves have a 316L stainless steel body with a curved offset ball trap. FEATURES Product flow pushes the ball ...
DN: 6, 8, 12 mm
Pressure: 350, 500 bar
Temperature: -40 °C - 120 °C
C2.940 Flow control valves C2.940 Flow control valves max. operating pressure 500 bar ports: G 1/4
DN: 0.25 in - 0.5 in
Pressure: 500 bar
Flow rate: 15, 55 l/min
C2.9511 Pilot-operated check valves C2.9511 Pilot-operated check valves without/with pre-release pipe-thread type max. operating pressure 500 bar connections: ...
DN: 5 mm - 9 mm
Pressure: 500 bar
Flow rate: 20, 50 l/min
C2.9512 Pilot-operated check valves C2.9512 Pilot-operated check valves without/with pre-release manifold-mounting type max. operating pressure 500 bar connecting ...
Pressure: 700 bar
Check valve, hydraulically pilot operated max. operating pressure 700 bar. Design: Housing made of steel, surface galvanized. Spring-loaded ball acting as a valve element. The ...
DN: 1, 0.5, 0.75 in
Pressure: 350 bar
NON-RETURN VALVE - Bezares SA - Leading hydraulic manufacturer Hydraulic valve for the flow control.
BEZARES S.A.
Pressure: 0 psi - 1,706.4 psi
Temperature: 50 °C
Flow rate: 50 l/min
BEZARES S.A.
Pressure: 0 bar - 1,706.4 bar
Temperature: 50 °C
Flow rate: 50 l/min
BEZARES S.A.
DN: 4 mm - 25 mm
Pressure: 350 bar
Temperature: -30 °C - 80 °C
Check valves prevent any flow in one direction. In the opposite direction, free flow with minimal pressure drop is possible. Advantages - High pressure rating - Virtually zero leakage - Compact ...
BUCHER Hydraulics
DN: 50 mm - 600 mm
Pressure: 25 bar
CHECK VALVE The valve closes totally the pipe line when back flow occurs. The valve is complete with an hydraulic control circuit able to regulate ...
DN: 80 mm - 300 mm
Pressure: 1 bar - 16 bar
The valve closes totally the pipe line when back flow occurs. The valve is complete with an hydraulic control circuit able to regulate operation’s speed during closing, preventing surge. TYPICAL ...
DN: 3 mm - 6 mm
Pressure: 700 bar
Temperature: -40 °C - 80 °C
... pilot-operated check valves are leak-proof check valves with which the flow direction from B to A is open and the flow direction from A to B is normally blocked. If a ...
DN: 2 in - 12 in
Pressure: 300 psi
Temperature: 0 °C - 80 °C
Model HCV, UL Listed Swing Check Valve, also known as NON-Return Valve, is commonly used in water pumping in Fire Systems. The main function the Swing Check Valve ...
DN: 2 in - 12 in
Pressure: 350 psi
Temperature: 0 °C - 80 °C
Model HCV-350GG, theUL Listed Groove Swing Check Valve, allows and easy and faster installation, this valve is commonly used in water pumping in Fire Systems. T he main function the ...
Pressure: 3 bar - 230 bar
Temperature: -30 °C - 80 °C
Flow rate: 14, 250 l/min
Holding Valve, double check valve up to 230 BAR, G1/4 OR Manifold type, HYDRAULIC and PNEUMATIC The valve consists of a one-piece housing and is therefore ...
Inosol
Pressure: 0 bar - 320 bar
Screw-In Valve up to 320 bar Miniature-Non Return Valve as Screw-In Valve from stainless steel for thread M6. – Suitable for high pressure areas – Simple mounting hole – Space-saving ...
Inosol
Pressure: 0 bar - 300 bar
Miniature Check Valve - Individual positioning - Simple mounting hole - Valve combinations possible - For hydraulic and pneumatic applications - Working pressure ...
Inosol
DN: 200 mm
Pressure: 1 bar
Temperature: -40 °C - 90 °C
... basins/tanks - 4000l/h for geomembrane basins) for a pressure loss (groundwater pressure or gas pressure needed for opening the valve) of 60 mbar (60 mm head).
DN: 80 mm - 200 mm
Pressure: 10, 16 bar
Temperature: 60 °C
... Association for Gas and Water Applications), it is your reliable check valve. Perfect for all projects in which water should only flow in one direction: to the consumer. The Dueker check ...
Pressure: 0 bar - 320 bar
VR*-I valves are one-way check valves cartridge type construction and can be used in blocks or panels. In rest conditions, the valve poppet, which is a cone on edge ...
Duplomatic Oleodinamica
DN: 8 mm - 50 mm
Pressure: 100 bar - 400 bar
Temperature: 0 °C - 100 °C
... applications... PRESSURE PFA/PS in bar θ 100° CASING : high pressure check valve in carbon steel SEALS : NBR (nitrile) PRESSURE PFA/PS in bar θ 230° CASING : high pressure check ...
DN: 6 mm
Pressure: 500 bar
Shut-off valves and spring-loaded seat valves from STAUFF: Check valves with metallic seal for tube installation with SP, NPT or UN/UNF female thread. Allow flow in only ...
DN: 8 mm - 100 mm
Pressure: 63 bar
Temperature: -20 °C - 200 °C
Body material Stainless steel CF8M Check valve material Stainless steel 316 PN (End) PN63 End BSP Female/Female Contact sealing metal/metal
TECOFI
DN: 0.5 in - 2 in
... Piece, Standard Port, Threaded One-Way Bronze Ball Valves w/Integral Check feature a cam lock smart ball check valve insert manufactured from polymer materials, NBR rubber ...
DN: 0.25 in - 4 in
Pressure: 16 bar
Temperature: -10 °C - 150 °C
The short stamped check valve is made in stainless steel. Any desired position is possible in respect to the flow of direction shown by the arrow. It has an operating temperature range of -10°C to ...
SFERACO
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining