- Machine-tools >
- Machining Center >
- Y-axis lathe >
- INDEX FRANCE
INDEX FRANCE Y-axis lathe
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Diameter: 315 mm
Spindle speed: 4,000 rpm
Maximum part length: 750 mm
... drive for high torques Bar capacity dia. 82 mm, chuck up to dia. 315 mm Orthogonal, linear Y-axis for high accuracy NC tailstock with electrically controlled axis Already included: ...
INDEX FRANCE
Diameter: 400 mm
Spindle speed: 3,150 rpm
Maximum part length: 750, 1,200 mm
... drive for high torques Bar capacity dia. 102 mm, chuck up to dia. 400 mm Orthogonal, linear Y-axis for high accuracy NC tailstock with electrically controlled axis Also available ...
INDEX FRANCE
Diameter: 315 mm
Spindle speed: 4,000, 6, 5,400 rpm
Bar capacity: 82 mm
... guides Orthogonal, linear Y-axis for high accuracy Structured machine design The TRAUB TNA400 stands for consistent further development of proven production solutions from TRAUB. Individually equipped, ...
INDEX FRANCE
Diameter: 400 mm
Spindle speed: 3,150, 5,400 rpm
Bar capacity: 102 mm
... for high torques Spindle clearance dia. 102 mm, chuck up to dia. 400 mm Generously dimensioned bed guides Orthogonal, linear Y-axis for high accuracy The control TRAUB TX8i-s The open control ...
INDEX FRANCE
Diameter: 65 mm
Spindle speed: 6,000 rpm
Bar capacity: 65 mm
Y axis-functionality for surface milling and off-center drilling Compact design and high performance with minimal floor space requirements Spindle clearance up to 65 mm Reduced cycle time through dynamic ...
INDEX FRANCE
Diameter: 110 mm
Spindle speed: 7,000 rpm
Maximum part length: 400 mm
Simultaneous machining using 2 or 3 turrets High acceleration (1g) and high rapid traverses (60 m/min) Workpiece carrier with Y-axis available on main and counter spindles 2 powerful motor spindles ...
INDEX FRANCE
Diameter: 22, 24 mm
Spindle speed: 10,000 rpm
Axe X: 62 mm
Highly-dynamic slides with sliding guide (X-axis) Non-wearing Z-axis due to quills with hydrostatic support Chuck part machining with loading and unloading by robots Up to 16 tool holders with 1 or ...
INDEX FRANCE
Diameter: 40 mm
Spindle speed: 7,000 rpm
Bar capacity: 40 mm
... -dynamic slides with sliding guide (X-axis) Non-wearing Z-axis due to quills with hydrodynamic support Front-opening machine for bar machining Chuck part machining with loading and unloading by robots ...
INDEX FRANCE
Diameter: 16, 13 mm
Spindle speed: 12,000, 8,000 rpm
Axe X: 152, 38 mm
... sliding/fixed headstock automatic lathe is a further logical development of established production technologies. Whether as a Swiss-type sliding headstock lathe or for highly productive use as a fixed ...
INDEX FRANCE
Diameter: 32 mm
Spindle speed: 8,000, 6,400 rpm
Axe X: 140 mm
... tool drive system from TRAUB Equipped with B-axis The TNL32-7B version is an expansion stage, which expands the range of applications by the most demanding machining tasks. With the additional B-axis ...
INDEX FRANCE
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining