Interroll conveyors

Maximum load: 0.001 kg - 150 kg
Speed: 0.15 m/s - 0.34 m/s

The Interroll Cassette system is a drum motor drive system to drive a conveyor belt in supermarket checkouts and in equipment used in supermarkets, including retail-based reversed vending machines. The Interroll Cassette ...

Maximum load: 0.001 kg - 30 kg
Speed: 0.3, 0.38 m/s

Small transition, only ø 17 mm Drum motor as a center drive Self-tracking belt, even for reversible operation No dependency on belt tolerances thanks to fixed cassette length CC Longer belt life due to low tension forces Advantageous ...

Maximum load: 50 kg
Speed: 0.11 m/s - 0.34 m/s

... clever design. The belt is already tensioned and tracked and the conveyor is run in before delivery. This makes on-site installation very quick and easy. The lean construction of the conveyor without ...

Maximum load: 100 kg

The non-powered straight roller conveyor transports materials either manually or via gravity down a slope and is used as an assembly and picking line. The Magnetic Speed Controller 50 can be installed for controlled ...

Maximum load: 100 kg

The non-powered roller conveyor curve changes the transport direction of materials. Material is manually pushed around the curve. The alignment of the material is maintained within the side frames by tapered rollers.

Maximum load: 50 kg
Speed: 0.1 m/s - 1 m/s

The 24 V roller conveyor enables zero pressure accumulation transport of unit loads with the help of a controller. Each zone is powered by a RollerDrive that is connected to a fixed number of idlers via PolyVee belts.

Maximum load: 50 kg
Speed: 0.1 m/s - 1 m/s

The 24 V roller conveyor curves change the direction of transport of the material. The conical rollers retain the alignment of the materials between side frames. A controller enables zero pressure accumulation transport. ...

Maximum load: 50 kg
Speed: 0.1 m/s - 1 m/s

The merge merges two conveyor lines by placing products in the gaps in the material flow. Alternatively, the merge diverts products from a straight conveyor, e.g., by using an HPD (High Performance Divert).

Maximum load: 50 kg
Speed: 0.1 m/s - 1 m/s

The 24 V alignment conveyor guides products diagonally to the transport direction to a side frame, and aligns them to the side guide if necessary. The side guide must be suitable for this purpose.

Maximum load: 50 kg
Speed: 0.1 m/s - 2 m/s

The roller conveyor powered by 400 V is available in 2 operating modes. The permanently powered flat belt conveyor RM 8210 serves as a transport conveyor that requires only one 400-V ...