JAKSA direct-operated solenoid valves
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
DN: 1.5 mm - 2.5 mm
Voltage: 12 V - 380 V
Temperature: 0 °C - 60 °C
... installation requirements. The solenoid can be easily and quickly replaced without interfering with the pressurised part of the valve. On the same mechanical part different types ...
CAMOZZI AUTOMATION
DN: 0.6 mm - 1.6 mm
Voltage: 5 V - 24 V
Temperature: 0 °C - 50 °C
... such as portable oxygen concentrators or emergency lung ventilators. For applications that demand more robust performance levels, the KLE version has been designed to control higher pressures and flow rates than ...
CAMOZZI AUTOMATION
DN: 0.8 mm - 1.3 mm
Voltage: 6 V - 24 V
Temperature: 0 °C - 50 °C
High chemical resistance in contact with fluids The media-separating solenoid valves Series KDV are designed to control critical fluids such as aggressive, high-purity or temperature-sensitive ...
CAMOZZI AUTOMATION
DN: 0.7 mm - 1.1 mm
Voltage: 12 V - 24 V
Temperature: -5 °C - 50 °C
The direct operated solenoid valve is the interface between pneumatic and electronic. In fact, it is actuated by an electrical signal and in turn gives ...
PNEUMAX
Voltage: 12, 24, 220, 230 V
Temperature: -10 °C - 140 °C
Pressure: 0 bar - 50 bar
PNEUMAX offer a vast range of solenoid valves in brass and stainless steel designed to control air, water, steam and all fluids that are compatible with the materials (body and seals) used in the range. ...
PNEUMAX
Temperature: -50 °C - 150 °C
Pressure: 12 bar
Stainless steel brand series have been engineered and developed to meet process automation and Oil & Gas severe service requirements, where material performances, product reliability and health and safety issues are critical elements. ...
PNEUMAX
DN: 1.3, 1.8 mm
Voltage: 12, 24 V
Temperature: 0 °C - 55 °C
... flows with more stroke Specifications *********** Valve Type: 2-Way or 3-Way, Normally-Closed or Normally-Open, Fully-Ported (3-Way) Medium: Compatible Fluids (40 micron filter recommended) Air ...
Clippard
DN: 0.6, 1, 1.5 mm
Voltage: 6, 12, 24 V
Temperature: 0 °C - 65 °C
... ultra-low leak applications Specs: ------- Valve Type: 2-way bi-directional or 3-way normally-closed & universally ported Ports: Inlet and outlet through manifold + 3-Way: Exhaust through top of valve Operating ...
Clippard
Voltage: 12, 24 V
Temperature: 0 °C - 70 °C
Pressure: 0 bar - 2 bar
The Clippard NIV Series Media Isolation Valve is a solenoid-operated device that uses a flexible diaphragm to isolate the actuation mechanism from the fluid path. Media isolation valves ...
Clippard
DN: 0.25, 0.375, 0.5 in
Temperature: -5 °C - 60 °C
Pressure: 1 mbar - 1,500 mbar
... which is activated by an electric coil. The solenoid pilot valve shutter in NBR nitrile rubber or Vulkollan®, is an integral part of the actuator mobile core. Both the orifices of the ...
VUOTOTECNICA
DN: 0.25, 0.35, 0.5, 0.125 in
Pressure: 0.5 mbar - 1,500 mbar
VUOTOTECNICA
DN: 0.5, 1 in
Temperature: -5 °C - 60 °C
Pressure: 0.5 mbar - 1,500 mbar
... techniques and of the in-depth knowledge of our technicians. This series of solenoid valves is patented. The DDN solenoid valves are direct drive, ...
VUOTOTECNICA
Voltage: 24 V
Pressure: 150,000 Pa
For reliable control of the coolant flow: Bosch solenoid valves are designed with decades of experience in thermal, fluid and energy circuits. Due to their robustness and design optimized for volume flow, ...
Robert Bosch GmbH
Voltage: 12 V
Pressure: 150,000 Pa
For reliable control of the coolant flow: Bosch solenoid valves are designed with decades of experience in thermal, fluid and energy circuits. Due to their robustness and design optimized for volume flow, ...
Robert Bosch GmbH
Voltage: 24 V
Pressure: 150,000 Pa
For reliable control of the coolant flow: Bosch solenoid valves are designed with decades of experience in thermal, fluid and energy circuits. Due to their robustness and design optimized for volume flow, ...
Robert Bosch GmbH
DN: 10 mm - 25 mm
Voltage: 120, 230 V
Pressure: 150 mbar - 200 mbar
Class A gas safety valves to EN 161 for automatic shut-off, closed when de-energized, quick opening, quick closing, for gas and air, with socket, EU certified. Class A gas safety valves to EN 161 ...
DN: 0.125 in
Temperature: -10 °C - 100 °C
Pressure: 0 bar - 20 bar
EV310A covers a wide range of small competitive, direct-operated 3/2-way solenoid valves for use within industrial applications, for example as pilot ...
Danfoss Industrial Automation
DN: 10 mm
Voltage: 12 V
Temperature: 5 °C - 50 °C
PIT-10 solenoid valves are the latest development in modern pneumatic design, where the main trends focus on miniaturisation, enhanced performance, reduced power and reliability. Numerous ...
METAL WORK
DN: 8 mm
Voltage: 12 V - 220 V
Temperature: -15 °C - 50 °C
• Possible assembly on single and multiple bases • Monostable manual actuation as standard • Assembly in any position • Operation with filtered lubricated or unlubricated • Maximum ambient temperature: 50®C • Low ...
METAL WORK
DN: 15 mm
Voltage: 24 V - 220 V
Temperature: -10 °C - 50 °C
• Possible assembly on single and multiple bases • Monostable manual actuation as standard • Assembly in any position • Operation with filtered lubricated or unlubricated • Low power absorption Quantity per package: ...
METAL WORK
DN: 1 mm - 6 mm
Voltage: 24, 110, 230 V
Temperature: -10 °C - 80 °C
... controlled solenoid valve operates without differential pressure up to 90 bar, even in closed media circuits. It is therefore perfect for high-pressure and dispensing applications. • Extensive pressure ...
DN: 2, 4, 3, 5 mm
Voltage: 12 V - 230 V
Temperature: -30 °C - 90 °C
The 0330 valve is a direct-acting, media-separated pivoted armature valve. It is available as a 2/2 and 3/2-way variant. As a 3/2-way variant, it can be used as a distributor or mixing ...
BÜRKERT FLUID CONTROL SYSTEMS
DN: 0.8 mm - 2 mm
Voltage: 12, 24 V
Temperature: 0 °C - 50 °C
• 2/3-Port Solenoid Valve for Chemical Liquids • Applicable fluid: Chemical liquids • Flow rates up to 0.9 l/min (water) and 57 l/min (air) • Isolated structure • With power saving circuit • 2 models: ...
SMC
DN: 0.25, 0.375 in
Temperature: -40 °C - 105 °C
Pressure: 25 bar
... decision - complete range of solenoid valves Danfoss offers a complete range of servo-operated solenoid valves for air conditioning systems. EVR ...
DN: 10 mm
Voltage: 5 V - 24 V
Temperature: -40 °C - 49 °C
... 15 psig and power as low as 318 mW, genvi is the ideal candidate for high flow control solenoid valve applications flowing air or gas. The new genvi solenoid valves ...
THE LEE COMPANY
DN: 7 mm
Voltage: 3 V - 24 V
Temperature: -40 °C - 49 °C
LHD Series valves are compact, 7 mm conventional control solenoid valves intended for medical and scientific applications flowing air or gas. Available ...
THE LEE COMPANY
DN: 7 mm
Voltage: 3 V - 24 V
Temperature: -40 °C - 49 °C
LHL Series valves are compact, 7 mm magnetically latched control solenoid valves that feature ultra-low power consumption (as low as 5.5 mJ/switch), low noise, and flow rates as high ...
THE LEE COMPANY
Voltage: 24 V
Temperature: -20 °C - 65 °C
Pressure: 3 bar - 10 bar
• Assists machine designers in complying with the European Machineries Directive • Can help existing machinery to comply with PUWER (Provision and Use of Work Equipment Regulations) • Controlled increase of downstream pressure on start ...
Norgren
Voltage: 24 V
Temperature: -20 °C - 80 °C
Pressure: 3 bar - 10 bar
... Provision and Use of Work Equipment Regulations) Controlled increase of downstream pressure on start up Medium: - Compressed Air
Norgren
DN: 3 mm
Voltage: 230, 24 V
Temperature: -25 °C - 80 °C
... from 0 bar upwards Short switching times Suited for fine vacuum 1,33·10-3 mbar Assembled oil and grease-free For a.c. solenoid systems with integrated rectifier (40 to 60 Hz)
Norgren
DN: 0.375, 0.25, 0.125 in
Voltage: 6 V - 240 V
Temperature: -194 °C - -181 °C
... equipment, pumps, compressors, boilers, burners, food processing and many others. Specifications Valve ActuationSolenoid; Solenoid - Direct Acting; Solenoid - Latching Body ...
ASCO
DN: 7 mm - 21 mm
Voltage: 12, 24 V
Temperature: 0 °C - 50 °C
... volume vs standard threading solenoid valves • Improve mobility/portability - 80% reduction in weight vs standard threading solenoid valves • Save cost - very ...
Parker Fluid Control Division - Europe
DN: 0.79 mm - 1.59 mm
Voltage: 12 V - 24 V
Pressure: 0 bar - 69 bar
The AG Series solenoid valve gives you a highly adaptable design for practically all applications requiring flow between CV 0.019 and 0.300. This robust 2- or 3-way miniature solenoid ...
GEMS SENSORS & CONTROLS
DN: 3.5 mm
Voltage: 24 V
Temperature: 0 °C - 55 °C
... occupied pneumatic connections or leads) Reset: Spring Valve type: Poppet valve Order no.: 97.100.00.00 For more information, please visit: https://kuhnke.kendrion.com/industrial/ics/en/kuhnke-pneumatic-fluid-technology/valves/fluid-isolation-valves.html ...
Kendrion Kuhnke Automation GmbH
DN: 3.5 mm
Voltage: 24 V
Temperature: 0 °C - 55 °C
... occupied pneumatic connections or leads) Reset: Spring Valve type: Poppet valve Order no.: 97.100.24.00 For more information, please visit: https://kuhnke.kendrion.com/industrial/ics/en/kuhnke-pneumatic-fluid-technology/valves/fluid-isolation-valves.html ...
Kendrion Kuhnke Automation GmbH
DN: 3.5 mm
Voltage: 24 V
Temperature: 0 °C - 55 °C
... occupied pneumatic connections or leads) Reset: Spring Valve type: Poppet valve Order no.: 97.110.00.00 For more information, please visit: https://kuhnke.kendrion.com/industrial/ics/en/kuhnke-pneumatic-fluid-technology/valves/fluid-isolation-valves.html ...
Kendrion Kuhnke Automation GmbH
Voltage: 24 V
Temperature: -20 °C - 80 °C
Pressure: 350 bar
The Zone Valve is primarily used for oil applications. It is possible to have between 1 to 5 Zones. Each Zone or outlet is independently activated by 24 V DC solenoid coils. This valve ...
Voltage: 12, 24, 110 V
Temperature: -20 °C - 100 °C
Pressure: 400 bar
"SHUT OFF" valve is the basic component to transform a standard progressive lubrication system into a programmable system. The "SHUT OFF" valve comprises a solenoid valve ...
DN: 2.3, 0.8, 1.6 mm
Voltage: 24 V
Temperature: 0 °F - 149 °F
... -DP: All body ports are M5. • A-DG: G 1/8 male output port for mounting directly to suction cups, air cylinder, or the pilot port of a larger valve. Ports 1 and 3 are M5.
DN: 0.125 in
Voltage: 230, 24, 115, 48 V
Temperature: -10 °C - 130 °C
Seals: NBR, EPDM, FPM, PTFE Ambient temperature: +55°C max Viscosity: 21 mm2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical protection: IP65 (with plug to ISO 6952 ...
JAKSA SOLENOID VALVES
DN: 0.25, 0.125 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 130 °C
Seals: NBR, EPDM, FPM, PTFE Ambient temperature: +55°C max Viscosity: 21 mm2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical protection: IP65 (with plug to ISO 6952 ...
JAKSA SOLENOID VALVES
DN: 0.125, 0.25 in
Voltage: 115, 230, 24 V
Temperature: -10 °C - 130 °C
Internal parts: stainless steel Seals: NBR, EPDM, FPM, PTFE Viscosity: 21 mm2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical protection: IP65 (with plug to ISO 6952 ...
JAKSA SOLENOID VALVES
DN: 10 mm
Voltage: 12, 230, 120, 24 V
Temperature: -20 °C - 100 °C
... -way solenoid valve has a completely plastic encapsulated coil. The armature is sealed by a bellows made of PTFE backed by an additional safety diaphragm. The valve body is available ...
DN: 2 mm
Voltage: 12 V - 230 V
Temperature: -20 °C - 100 °C
... -way solenoid valve has a completely plastic encapsulated coil. The armature is sealed by a bellows made of PTFE backed by an additional safety diaphragm. The valve body is available ...
DN: 2 mm
Voltage: 24 V - 230 V
Temperature: -10 °C - 50 °C
The GEMÜ 0326 Directly controlled 3/2-way pilot solenoid valve is designed for mounting to a compact aluminium rail as a valve battery for mounting in ...
DN: 2 mm
Voltage: 24 V
Temperature: -10 °C - 95 °C
Perfect for the integration of a second lubricant circuit, this 2/2-way valve can engage the circuit (pressure-free), while the OS-BP pump is in non-operating state. Model versions: - - currentless when closed Housing ...
DN: 1.6 mm
Temperature: -20 °C - 90 °C
Pressure: 0 bar - 20 bar
Material: Housing: Brass · Pin and spring: Stainless steel · Seals: NBR Power input: DC 5 W / AC 6.5 VA
DN: 6 mm
Temperature: -10 °C - 90 °C
Pressure: 0 bar - 1 bar
... Housing: Brass · Pin and spring: Stainless steel · Seals: NBR LED - no Clock rate - 2000 cycles/min. AC [VA] - 10.0 DC [W] - 6.0
DN: 1.8 mm - 6 mm
Voltage: 12 V - 24 V
Temperature: -10 °C - 80 °C
Application : Air, water, gas Size : 1/8", 1/4" Direct acting; 3/8"…2"Operated Working Pressure : 0…16 Bar (1/8", 1/4") / 0,5…16 Bar (3/8"...2" ) Core, Tube :Stainless Body : Brass Seal ...
SMS-TORK
DN: 0.375 in - 1 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 80 °C
... series solenoid valves is direct operated and full body design. That is supply direct acting solenoid valve up to max ...
SMS-TORK
DN: 0.125 in - 2 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 160 °C
The S4010 (Normally Close) , S4011 ( Normally Open ) Series features solenoid valves designed for applications in fuel oil, burners, etc. These valves are built with stainless steel ...
SMS-TORK
DN: 2 mm
Voltage: 12, 24 V
Pressure: -70,000 Pa - 300,000 Pa
Structure - Direct-acting diaphragm, 2 way NC No.of ports - 2(specified inlet and outlet) Body material - POM,PVDF,PTFE Diaphragm material - EPDM,FKM,FFKM Voltage - 12V/24V Flow rate - 6.8g/s(25℃,50KPa ,H2O) Power ...
Keyto Fluid Technology
DN: 2.4 mm
Voltage: 24 V
Pressure: 0 bar - 4.5 bar
... material - PPA diaphragm material - FKM Dimension - 40.5*23*65.4 No. of ports - 2 Power Consumption - 6.5W Structure - Direct acting piston type Voltage - / Flow Rate - 10L/min Main Features - 1. Small size, ...
Keyto Fluid Technology
DN: 1.5 mm
Voltage: 12, 24 V
Pressure: -70,000 Pa - 400,000 Pa
Structure - Rocker diaphragm type, 2 way NC No.of ports - 2(specified inlet and outlet) Body material - PEEK,PVDF Diaphragm material - EPDM,FKM,FFKM Flow rate - 6.5g/s(25℃,50KPa ,H2O) Power consumption - 3.5W Main features - 1.Large ...
Keyto Fluid Technology
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Asco direct-operated solenoid valves
- PARKER direct-operated solenoid valves
- Bosch direct-operated solenoid valves
- CAMOZZI direct-operated solenoid valves
- Clippard direct-operated solenoid valves
- METAL WORK direct-operated solenoid valves
- Norgren direct-operated solenoid valves
- PNEUMAX direct-operated solenoid valves
- THE LEE COMPANY direct-operated solenoid valves
- VUOTOTECNICA direct-operated solenoid valves
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining