JAKSA gas solenoid valves

Voltage: 12, 24, 220, 230 V
Temperature: -10 °C - 140 °C
Pressure: 0 bar - 50 bar

PNEUMAX offer a vast range of solenoid valves in brass and stainless steel designed to control air, water, steam and all fluids that are compatible with the materials (body and seals) used in the range. ...

Temperature: -10 °C - 130 °C
Pressure: 10 bar

... self feeding solenoids, designed according to the following configuration: •Solenoid-spring valve •Solenoid-solenoid valve Pneumax ...

Temperature: -20 °C - 70 °C
Pressure: 10 bar

... feeding solenoids, designed according to the following configuration: • Solenoid-spring valve • Solenoid-solenoid valve • Solenoid ...

DN: 1.3, 1.8 mm
Voltage: 12, 24 V
Temperature: 0 °C - 55 °C

... flows with more stroke Specifications *********** Valve Type: 2-Way or 3-Way, Normally-Closed or Normally-Open, Fully-Ported (3-Way) Medium: Compatible Fluids (40 micron filter recommended) Air ...

DN: 0.6, 1, 1.5 mm
Voltage: 6, 12, 24 V
Temperature: 0 °C - 65 °C

... ultra-low leak applications Specs: ------- Valve Type: 2-way bi-directional or 3-way normally-closed & universally ported Ports: Inlet and outlet through manifold + 3-Way: Exhaust through top of valve Operating ...

Voltage: 12, 24 V
Temperature: 0 °C - 70 °C
Pressure: 0 bar - 2 bar

The Clippard NIV Series Media Isolation Valve is a solenoid-operated device that uses a flexible diaphragm to isolate the actuation mechanism from the fluid path. Media isolation valves ...

DN: 1.5 mm - 2.5 mm
Voltage: 12 V - 380 V
Temperature: 0 °C - 60 °C

... installation requirements. The solenoid can be easily and quickly replaced without interfering with the pressurised part of the valve. On the same mechanical part different types of solenoids ...

DN: 0.6 mm - 1.6 mm
Voltage: 5 V - 24 V
Temperature: 0 °C - 50 °C

... portable oxygen concentrators or emergency lung ventilators. For applications that demand more robust performance levels, the KLE version has been designed to control higher pressures and flow rates than traditional ...

DN: 10.5, 25, 16 mm
Voltage: 24 V
Temperature: 0 °C - 50 °C

... compact design and aluminium body, the valves and solenoid valves Series D are suitable for a wide range of industrial applications, from traditional uses right through to more innovative ...

DN: 3 mm
Temperature: -25 °C - 80 °C
Pressure: 0 bar - 14 bar

... from 0 bar up Short switching times Suited for fine vacuum down to 1,33·10-3 mbar Assembled oil and grease-free For a.c. solenoid systems with integrated rectifier (40 to 60 Hz)

Voltage: 24 V
Temperature: -20 °C - 65 °C
Pressure: 3 bar - 10 bar

• Assists machine designers in complying with the European Machineries Directive • Can help existing machinery to comply with PUWER (Provision and Use of Work Equipment Regulations) • Controlled increase of downstream pressure on start ...

Voltage: 24 V
Temperature: -20 °C - 80 °C
Pressure: 3 bar - 17 bar

- Assists machine designers in complying with the European Machineries Directive - Can help existing machinery to comply with PUWER (Provision and Use of Work Equipment Regulations) - Controlled increase of downstream pressure on start ...

DN: 0.25, 0.35, 0.5, 0.125 in
Pressure: 0.5 mbar - 1,500 mbar

DN: 0.25 in - 1.5 in
Temperature: -5 °C - 60 °C
Pressure: 0.5 mbar - 3,000 mbar

Servo-controlled 3-way vacuum solenoid valves The 3-way vacuum solenoid valves in this series are 2-position valves with pneumatically servo-controlled ...

DN: 0.25 in - 3 in
Temperature: -5 °C - 60 °C
Pressure: 0.5 mbar - 3,000 mbar

Servo-controlled 3-way vacuum solenoid valves with two electric coils These solenoid valves have the same function and the same structure as the previously described ...

DN: 10 mm
Voltage: 12 V
Temperature: 5 °C - 50 °C

PIT-10 solenoid valves are the latest development in modern pneumatic design, where the main trends focus on miniaturisation, enhanced performance, reduced power and reliability. Numerous versions are ...

DN: 8 mm
Voltage: 12 V - 220 V
Temperature: -15 °C - 50 °C

... Hz): 30 Max input pressure (bar): 010 Max torque for coil nut (Nm): 1 Response time (ms): 8÷15 Product series: Valve PIV on base Time (Cycles): 25 million Type: Electro-pneumatic on base Voltage tolerance: ...

DN: 15 mm
Voltage: 24 V - 220 V
Temperature: -10 °C - 50 °C

• Possible assembly on single and multiple bases • Monostable manual actuation as standard • Assembly in any position • Operation with filtered lubricated or unlubricated • Low power absorption Quantity per package: 0 Minimum ...

DN: 1 mm - 6 mm
Voltage: 24, 110, 230 V
Temperature: -10 °C - 80 °C

... controlled solenoid valve operates without differential pressure up to 90 bar, even in closed media circuits. It is therefore perfect for high-pressure and dispensing applications. • Extensive pressure ...

DN: 40, 50, 13.5, 27.5 mm
Voltage: 24, 230, 110 V
Temperature: -10 °C - 80 °C

... closed applications such as cooling or filling systems • Vacuum • Liquid gas • Filling systems Design • Diaphragm valves • Forced lifting of the valve diaphragm • 2/2-way valve, ...

DN: 13 mm - 50 mm
Voltage: 110, 230, 24 V
Temperature: -10 °C - 60 °C

The poppet valve with diaphragm seal for control of air or water is suitable for all-purpose use with either medium. • Brass or stainless steel casting design • Electrical connection via solenoid ...

DN: 10 mm
Voltage: 5 V - 24 V
Temperature: -40 °C - 49 °C

... 15 psig and power as low as 318 mW, genvi is the ideal candidate for high flow control solenoid valve applications flowing air or gas. The new genvi solenoid ...

DN: 7 mm
Voltage: 3 V - 24 V
Temperature: -40 °C - 49 °C

LHD Series valves are compact, 7 mm conventional control solenoid valves intended for medical and scientific applications flowing air or gas. Available ...

DN: 7 mm
Voltage: 3 V - 24 V
Temperature: -40 °C - 49 °C

... state, these valves don’t consume power, generate heat, or produce noise. Their reliable bi-stable switching performance in a miniature size is ideal for battery powered applications flowing air of gas. Application ...

DN: 5 mm - 50 mm
Voltage: 12 V
Temperature: -20 °C - 80 °C

... is the largest solenoid valve manufacturer in India and a leading global solenoid valve supplier. Since 1967, Rotex has served over 7000 customers across 73 countries ...

DN: 1.2 mm - 1.6 mm
Voltage: 12 V
Temperature: -20 °C - 80 °C

... pressure solenoid valve We offer a range of proven high pressure solenoid valves intended for use with compressed air and high pressure water. Specification of 2 way ...

DN: 12, 20, 25, 40 mm
Voltage: 12 V
Temperature: -30 °C - 75 °C

2 Port direct operated, high orifice normally closed solenoid valve Features of 2 way direct operated high orifice solenoid valve: Bubble Tight Shut Off. Vibration Resistance ...

DN: 0.125, 0.25 in
Voltage: 24 V - 230 V
Temperature: -10 °C - 130 °C

Internal parts: stainless steel Seals: NBR, EPDM, FPM, PTFE Viscosity: 21 mm2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical protection: IP65 (with plug to ISO 6952 ...

DN: 0.25, 0.125 in
Voltage: 24 V - 230 V
Temperature: -10 °C - 130 °C

Internal parts: stainless steel Seals: NBR, EPDM, FPM, PTFE Viscosity: 21 mm2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical protection: IP65 (with plug to ISO 6952 ...

DN: 0.25, 0.125 in
Voltage: 24 V - 230 V
Temperature: -10 °C - 165 °C

Internal parts: stainless steel Seals: NBR, EPDM, FPM Viscosity: 21 mm2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: max 1000 cycles/min Electrical protection: IP65 (with plug to ISO 6952 / ISO ...

DN: 4.5 mm
Voltage: 12, 6 V
Pressure: 0 bar - 7 bar

... 2 Power - 2.5W Structure - N.C pressure compensation valve Main Features 1. Good sealing effect and large flow 2. Low hysteresis 3. High repeatability Application - 1. Suitable for air and ...

DN: 4.5 mm
Voltage: 12, 5 V
Pressure: 0 bar - 7 bar

... Power - 2.8W Structure - N.C pressure compensation valve Main Features - 1. Good sealing effect and large flow 2. Low hysteresis 3. High repeatability Application - 1. Suitable for air ...

DN: 2 mm
Voltage: 12, 24 V
Pressure: -70,000 Pa - 300,000 Pa

Structure - Direct-acting diaphragm, 2 way NC No.of ports - 2（specified inlet and outlet） Body material - POM,PVDF,PTFE Diaphragm material - EPDM,FKM,FFKM Voltage - 12V/24V Flow rate - 6.8g/s(25℃，50KPa ，H2O） Power consumption - ...

DN: 0.125, 0.25 in
Temperature: -10 °C - 140 °C
Pressure: 0 bar - 40 bar

Component Parts and Materials 1 Body: Brass 2 Seals: NBR - EPDM - FKM 3 Welded armature tube: Stainless steel 4 Fixed and mobile core: Stainless steel 5 Springs: Stainless steel Operator diameter 10 mm

DN: 0.25, 0.125 in
Temperature: -10 °C - 140 °C
Pressure: 0 bar - 18 bar

Component Parts and Materials 1 Body: Brass 2 Seals: NBR - EPDM - FKM 3 Armature tube: Brass 4 Mobile core: Stainless steel 5 Springs: Stainless steel Maximum allowable pressure 40 bar Operator diameter 10 mm

DN: 0.125, 0.25 in
Temperature: -10 °C - 140 °C
Pressure: 0 bar - 13.5 bar

Component Parts and Materials 1 Body: Brass 2 Seals: NBR - EPDM - FKM 3 Welded armature tube: Stainless steel 4 Fixed and mobile core: Stainless steel 5 Springs: Stainless steel Room temperature with coil class H - 10 °C + 80 ...

DN: 1.5 mm - 4 mm
Voltage: 12 V - 220 V
Temperature: -10 °C - 140 °C

VQ direct electrovalves, are particularly suitable to control water, air, inert gas, steam and for all fluids in general (not aggressive). The extremely compact brass body, gives to them the possibility to be used in ...

DN: 10 mm - 25 mm
Voltage: 12 V - 220 V
Temperature: -10 °C - 140 °C

VQ indirect electrovalves, are particularly suitable to control water, air, inert gas, steam and for all fluids in general (not aggressive). The extremely compact brass body, gives to them the possibility to be used ...

DN: 10 mm - 25 mm
Voltage: 12 V - 220 V
Temperature: -10 °C - 140 °C

VQ membrane electrovalves, are particularly suitable to control water, air, inert gas, steam and for all fluids in general (not aggressive). The extremely compact brass body, gives to them the possibility to be used ...

Voltage: 24 V - 220 V
Temperature: -40 °C - 60 °C

QLight QEB solenoid valve box is explosion proof. It has aluminium housing and cover, which ensures high resistance to corrosion and a long service life. The box is waterproof. It is also resistant to ...

DN: 3.5 mm
Voltage: 24 V
Temperature: 0 °C - 55 °C

... Poppet valve Order no.: 97.100.00.00 For more information, please visit: https://kuhnke.kendrion.com/industrial/ics/en/kuhnke-pneumatic-fluid-technology/valves/fluid-isolation-valves.html Valve ...

DN: 3.5 mm
Voltage: 24 V
Temperature: 0 °C - 55 °C

... Reset: Spring Valve type: Poppet valve Order no.: 97.100.24.00 For more information, please visit: https://kuhnke.kendrion.com/industrial/ics/en/kuhnke-pneumatic-fluid-technology/valves/fluid-isolation-valves.html Valve ...

DN: 3.5 mm
Voltage: 24 V
Temperature: 0 °C - 55 °C

... : Poppet valve Order no.: 97.110.00.00 For more information, please visit: https://kuhnke.kendrion.com/industrial/ics/en/kuhnke-pneumatic-fluid-technology/valves/fluid-isolation-valves.html Valve ...

DN: 0.25 in
Voltage: 0 V - 30 V
Temperature: 0 °F - 174 °F

... proportional solenoid valve PSV proportional solenoid valve PSV proportional solenoid valve, PSV Valve - Product ...

DN: 2.3, 0.8, 1.6 mm
Voltage: 24 V
Temperature: 0 °F - 149 °F

... -DP: All body ports are M5. • A-DG: G 1/8 male output port for mounting directly to suction cups, air cylinder, or the pilot port of a larger valve. Ports 1 and 3 are M5.