JAKSA pilot-operated solenoid valves

Pressure: 0 bar - 6 bar
DN: 18 mm
Voltage: 230 V

2/2 TOTAL ISOLATION SOLENOID VALVES Model DL18NOpa G3/4 DN18 Air operated

Pressure: 0 bar - 15 bar
DN: 2 mm
Voltage: 24 V

2/2 TOTAL ISOLATION SOLENOID VALVES Model XDL2N G1/4 DN2 High pressure FEATURES: Pilot completely dry Wetted parts AISI 316L Operating pressure 15 bar max Higher pressure ...

Pressure: 0 mbar - 500 mbar
DN: 12 mm - 50 mm
Voltage: 200, 230 V

... INSTALLATION INSTRUCTIONS: Horizontal position with solenoid upright is preferred. Valve iz supplied in closed state; before use, pull the button on top of valve to open. ATTENTION! ...

Pressure: 0 bar - 10 bar
DN: 2 mm
Voltage: 230, 12 V

2/2 VALVES FOR GAS CYLINDERS Models PL3/PL10 TECHNICAL DATA Internal parts: stainless steel Seals: NBR Fluid temperature: -10°C to +60°C Ambient temperature: max +50°C Voltage: 230, 115, 48, 24 V AC / 24, 12 ...

Pressure: 0 mbar - 500 mbar
DN: 12 mm - 50 mm
Voltage: 200, 230 V

... GAS LINE SHUTOFF VALVES NC *Connected to 230VAC through plug with built-in rectifier (included). Low-noise design for applications that require very quiet operation. Valves are always to be installed ...

Temperature: -10 °C - 100 °C
Pressure: 10 bar - 1,000 bar
DN: 0.25 in

1000 BAR MAX SOLENOID VALVES NOTES: *80 W pull / 4 W hold PEEK is a non-elastic sealing material, a slight leakage on valve seat can be expected at low fluid pressure. OPTIONS: Other ...

Pressure: 10 bar - 500 bar
DN: 5 mm - 8.5 mm
Voltage: 200, 24 V

... DISPENSING AND SIMILAR USE SOLENOID VALVES PEEK is a non-elastic sealing material, therefore a slight leakage on valve seat can be expected at low fluid pressure. OPTIONS: Other ...

Temperature: -10 °C - 100 °C
Pressure: 0.3 bar - 10 bar
DN: 0.5, 0.375 in

Internal parts: stainless steel Seals: NBR, EPDM, FPM Fluid temperature: -10°C to +85°C (NBR); +100°C (EPDM, FPM) Ambient temperature: max +55°C Viscosity: max 21 mm2/s Response times: opening 0.05 - 1 s; closing ...

Pressure: 0.3 bar - 12 bar
DN: 0.5, 0.375 in
Voltage: 24 V - 230 V

Internal parts: stainless steel Seals: NBR, EPDM, FPM Fluid temperature: -10°C to +85°C (NBR); +100°C (EPDM, FPM) Ambient temperature: max +55°C Viscosity: max 21 mm2/s Response times: opening 0.05 - 1 s; closing ...

Temperature: -10 °C - 100 °C
Pressure: 0.3 bar - 12 bar
DN: 0.5 in

Internal parts: stainless steel Seals: NBR, EPDM, FPM Fluid temperature: -10°C to +85°C (NBR); +100°C (EPDM, FPM) Ambient temperature: max +55°C Viscosity: max 21 mm2/s Response times: opening 0.05 - 1 s; closing ...