- Power Transmission - Mechanical components >
- Actuator and Positioning System >
- Clamping cylinder >
- Jergens
Jergens clamping cylinders
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Stroke : 0 mm - 5,000 mm
Pressure: 0 bar - 70 bar
Rod diameter: 13 mm - 140 mm
... tie rod hydraulic cylinders are heavy duty, inch-dimensioned cylinders rated for use at working pressures up to 70 bar depending on the rod end and type of service. Like ail cylinders ...
Stroke : 0 mm - 40 mm
Force: 0 N - 3,000 N
C0D thrust cylinder with diaphragm pistons are available in single and double acting variants for high force to size ratio applications such as clamping, riveting, punching. Forces up to 12000N. Product ...
Stroke : 25 mm
Pressure: 2 bar - 10 bar
Force: 445 N
... in restricted space Neat, clean appearance One-piece body construction Medium: - Compressed Air Port size: - G1/8 Cylinder diameter: - 32 mm
Stroke : 4 mm
Pressure: 2 bar - 10 bar
Force: 55 N
... achieved in restricted space Neat, clean appearance One-piece body construction Medium: - Compressed Air Port size: - M5 Cylinder diameter: - 12 mm
Stroke : 25 mm - 150 mm
Pressure: 3 bar - 8 bar
Rod diameter: 12, 16, 20, 25 mm
... the cylinder. This guidance avoids the problems of buttressing, regularly encountered with ultra-short guides. These pneumatic cylinders are robust and reliable, even at high speed thanks to: screwed ...
Stroke : 8 mm - 10 mm
Force: 8.5 kN - 40 kN
B1.372 Low-block clamping cylinders B1.372 Low-block clamping cylinders single acting with spring return max. operating pressure 500 bar max. clamping ...
Römheld GmbH Friedrichshütte
Stroke : 5 mm - 10 mm
Pressure: 25 bar - 70 bar
Force: 0.3 kN - 10 kN
Threaded-Body Work Supports Advantages ● Side load up to 0.3 kN admissible (B1.9472) ● Space-saving threaded-body version ● Support in recesses and cavities (B1.9472) ● High process safety by double-acting function ● Workpiece ...
Römheld GmbH Friedrichshütte
Stroke : 60 mm - 1,200 mm
Pressure: 0 bar - 200 bar
Force: 9.8 kN - 100.5 kN
... valve function for unthrottled cylinder start ● Fixing thread and centring spigot at both cylinder heads allow mounting of non standard accessories ● Particularly suitable for fixture building by direct ...
Römheld GmbH Friedrichshütte
Stroke : 10 mm - 100 mm
Pressure: 350 bar
Force: 3 kN - 130 kN
Single or double acting, the linear cylinder is mainly used for holding a workpiece against its isostatic references before sarting the clamping process. This range can also be used for internal movements ...
Force: 4 kN - 10 kN
Centring clamp MINI with two clamping points Double-acting, max. operating pressure 250 bar, min. operating pressure 10 bar. Double-acting centring clamp with two clamping ...
Stroke : 6.5 mm - 10 mm
Force: 3 kN - 10 kN
Torque: 5.4 Nm - 30 Nm
... to do so can cause destruction of the clamping element by the escaping diesel effect. The vent hole must be connected. No coolant must be sucked through this. The supporting force should be matched to the clamping ...
Stroke : 6.5 mm - 10 mm
Force: 3 kN - 10 kN
Torque: 5.4 Nm - 80 Nm
... to do so can cause destruction of the clamping element by the escaping diesel effect. The vent hole must be connected. No coolant must be sucked through this. The supporting force should be matched to the clamping ...
Stroke : 115, 75 mm
Bore: 35 mm
Pressure: 2 bar - 10 bar
Clamping cylinders are the ideal solution for clamping pieces, mainly on cutting machines. - Two versions available (short and long type) - Single acting with front spring - Non-rotating - ...
Stroke : 0.22 in
Versatile threaded body cylinders can be used for a variety of high production applications such as workpiece positioning, locating, clamping, ejecting and punching. single and double acting versions ...
Stroke : 25 mm - 40 mm
Force: 1,296 N - 6,471 N
Tube I.D.:25, 32, 40, 50, 63 (mm), The clamp structure of this model is based on the lever principle; it will be tightened as piston putting out. The clamping force is stromger than the swing clamp ...
Lightened hydraulic cylinders Where lightweight requirements are required, we develop solutions that utilise and maximise material properties and component technology to minimise cylinder weight while ...
Stroke : 20 mm
Rod diameter: 45 mm
Force: 30 kN
... for the fixing are: high holding forces, fast clamping, fast releasing, a safe positioning, holding the force and position, and high cycle rates. For such cases we are offering hydraulic swing clamp ...
Stroke : 8 mm - 100 mm
Pressure: 500, 100 bar
Force: 1.2 kN - 62.8 kN
... threaded-body universal cylinders are delivered with the same piston diameters and strokes as the well-proven block cylinders. A hydraulic connection is made at the cylinder bottom by ...
Stroke : 1 µm - 25 µm
Pressure: 1 bar - 10 bar
Force: 650 N
By using the Pneumatic Cylinder, you can automate the clamping of your components, in order to maximize time- and cost effectiveness. In addition, automation guarantees precise measurements, such as clamping ...
SIEGMUND FRANCE
Stroke : 30 mm - 300 mm
Pneumatic cylinders SOBRAIR to increase the mechanical strength Applications: clamping, punching, crimping, swaging, riveting, cutting.
Pressure: 0 bar - 250 bar
Rod diameter: 25 mm - 200 mm
... special cylinders according to individual specifications. All cylinder versions can be produced as servo actuator with/without an integrated position measuring system. Specially developed are Universal ...
Stroke : 0.79, 1.16, 1.66, 0.76 in
Force: 0 kN - 1,000 kN
Top Flange Swing Cylinder These popular and highly adaptable swing style cylinders contain built in features, which allow users to simplify the design process. They are directly interchangeable with ...
Jergens, Inc.
Stroke : 26, 27, 29 mm
Clamp cylinder operating in rod retraction, with a combined clockwise or counterclockwise stroke and a linear stroke for tightening. Possible rotation angles 45°, 60° and 90°. Mounting by square base ...
AUTOMAX
Stroke : 5 mm - 100 mm
Pressure: 200, 320 bar
Force: 307 kgf - 10,345 kgf
The hydraulic lock cylinders of the CB series complete the wide range of special cylinders manufactured by our company for a variety of industrial sectors. Caracteristics The CB hydraulic lock cylinders ...
... series is composed of clamping hydraulic cylinders developed by Clamptek Enterprise Co., Ltd.. They are equipped with cylinder bores in a diameter that ranges from Φ22 up to Φ80 and ...
Clamptek Enterprise CO., LTD.
Stroke : 5,000 mm
Force: 10,000 kN
Clamping cylinder •Load: 1,000 t •Operating pressure: 500 bar •Stroke: up to 5,000 mm •Used in hard rock machinery •For gripper pressing with extension, depending on the machine diameter and high press force
Stroke : 13, 14 mm
Force: 0.85, 1.4 kN
Double-acting swing clamp cylinder with integrated work support. These cylinders stand out for compact design, unparalleled clamping stability, smooth running and minor ...
HYDROBLOCK
Force: 22 kN - 120 kN
HLZ hydraulic cylinders, in conjunction with spring actuated tool clamping and chucking devices, are intended for release and ejection of steep taper tooling and for stationary mounting.
Berg & Co. GmbH Spanntechnik
Stroke : 2 mm - 6 mm
Force: 10,000 N - 23,000 N
... series is composed of clamping hydraulic cylinders developed by OLMEC. It delivers a clamping force without permanent connection to a hydraulic power source. They are specifically designed ...
... secure the base of the cylinder. 3. OS3 outer thread of the cylinder is fixed directly to the cylinder used. 4. OS4 plate structure designed according to the principle of leverage, when ...
Jufan Industrial Co., Ltd.
... versatile cylinder that comes with a variety of piston shapes. It is a single-action cylinder with 3 strokes and a total of 102 different types to choose from. -The spring compartment, which used to be ...
KOSMEK
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining