- Machine-tools >
- Machine Tool Accessory >
- Collet chuck >
- Kitagawa
Kitagawa collet chucks
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
OD Holding Clamps with a machinable jaw are perfect for irregular-shaped workpieces. Simple workholding eliminates the need for custom fixtures. Ideal for clamping small part. When the locking screw is tightened, both jaws tilt ...
Centro-P, ER Précision Collet Chuck The Centro-P ER précision collet chuck is among the very best collet chucks available. Unique, ...
Clamping range: 0.25 mm - 25 mm
Rotational speed: 40,000 rpm
High Speed Collet Chucks The world’s highest precision & multi-purpose collet chuck system is well accepted and recognized by the market for its high-speed application ...
BIG KAISER
Clamping range: 0.08 mm - 0.79 mm
Rotational speed: 40,000 rpm
... precision of our collet, nut and body when used together shatter the common standard of ER collet chucks. The MEGA Series ER Grip collet chucks are ...
BIG KAISER
Clamping range: 3 mm - 12 mm
Rotational speed: 40,000 rpm
... End Mill Collet Chucks MEGA E Chucks are designed exclusively for end milling with high concentricity and rigidity. Gripping force is an important element for end milling with a collet ...
BIG KAISER
Force-actuated. Clamping sleeves optionally vulcanized. Convertible to MFS (required new intermediate piece). Physical characteristics Hardened, low-wear design Integrated lubrication Air sensing prepared Application area Internal ...
RÖHM GmbH
Force-actuated. Clamping sleeves optionally vulcanized. Convertible to MFR (required new intermediate piece). Physical characteristics Hardened, low-wear design Integrated lubrication Air sensing prepared Application area Internal ...
RÖHM GmbH
Force-actuated. Clamping sleeves optionally vulcanized. Physical characteristics Hardened, low-wear design Application area Internal clamping of round workpieces. Turning, milling, grinding and toothing operations, as well as for balancing ...
RÖHM GmbH
4-jaws-clamping chuck - Raring IP 65 Rating IP 65 with pressurization - Protection against copper and bronze - Permanent lubrication
Clamping range: 15 mm - 209 mm
Rotational speed: 1,500 rpm
Always the right solution Jaw clamping in the HAINBUCH chuck or stationary chuck Extremely fast conversion from O.D. to I.D. without detachment of the base clamping device [2 min Self-centering on ...
Clamping range: 25 mm - 209 mm
Rotational speed: 5,000, 3,000 rpm
Always the right solution Jaw clamping in the HAINBUCH chuck or stationary chuck Extremely fast conversion from O.D. to I.D. without detachment of the base clamping device [2 min Self-centering on ...
Clamping range: 16 mm - 40 mm
Jergens 5-Axis ER Collet Fixtures are an excellent workholder for cylindrical parts. Features, Benefits, & Product Specifications: - Material: Hardened Alloy Steel - Use with your existing ER Collets - ...
Clamping range: 1.5 mm - 200 mm
Rotational speed: 3,500 rpm - 6,300 rpm
The collet chucks are designed for demanding clamping geometries and varying workpiece diameters. The high-precision lamella clamping technology makes it possible to cover a clamping range of several ...
Clamping range: 12, 10, 8, 6 mm
KAINDL-MULTISHAFT-collet chuck support for angle grinders 115/125 mm ✔ Extend the range of functions of your angle grinder ✔ Use all tools of a customary straight grinder ✔ For grinding, brushing, carving, ...
collet holder type: Softsynchro Collet holder Softsynchro® for use with threading tools on machines with synchronised spindle. Product features and benefits: For use with collets ...
EMUGE-FRANKEN
collet holder type: Softsynchro Modular MQL Collet holder Softsynchro® Modular /MQL for minimum quantity lubrication for use with threading tools on machines with synchronised spindle. Product ...
EMUGE-FRANKEN
collet holder type: Softsynchro/MMS 1-channel Collet holder Softsynchro®/MQL for one-channel minimum quantity lubrication for use with threading tools on machines with synchronised spindle. Product ...
EMUGE-FRANKEN
Clamping range: 1 mm - 20 mm
The high precision CentroGrip™ collet chucks from Diebold guarantee the best possible radial run-out, with < 1µm for the collet holder body and < 2µm for collets. Due ...
Helmut Diebold
Clamping range: 6 mm - 34 mm
Preci-Point Collet Chuck The Preci-Point collet chuck advances our offerings of “Conventional Workholding”. It is designed for the machining of Ø 6 – 34 mm round parts. ...
Clamping range: 3 mm - 20 mm
The compact collet chuck with Quick-Point® zero-point interface is designed for milling round components with clamping diameters of 3 - 20 mm and uses commercially available ER-32 collets. ...
Clamping range: 0.5 mm - 20 mm
... for antirust Type of taper shank: JIS B6339-AD The ER collet chuck can be applied for end mills, drill bits, drill reamers, taps, and can clamp any cylindrical cutters. With ER collet ...
Clamping range: 0.5 mm - 26 mm
... for antirust Type of taper shank: JIS B6339-AD The ER collet chuck can be applied for end mills, drill bits, drill reamers, taps, and can clamp any cylindrical cutters. With ER collet ...
Clamping range: 0.3 mm - 34 mm
... degree Collets with DIN6499/ISO15488 Standard. EVERY SINGLE Alps Tool's AR collet is inspected without exception. The collets are inspected THREE TIMES at different position, and only ...
ALPSTOOL
Adjustable cutting edge for Y axis positioning. It can be use for coolant through Alignnable chuck center line and drill center line.
ALPSTOOL
Y-X Adjustable concentricity within the range of ±0.1mm. Extended tool life and high precision processing by eccentricity of blade edge due to frictional wear, super-hard drill and reamer processing.(eccentricity of blade edge minimum ...
ALPSTOOL
Clamping range: 50 mm
... opening diameter of this collet is 32 mm. For suitable collets for this chuck please take a look at the table below. For an easy fixturing of the collet chuck, ...
Advantages at a glance Material: steel, rust-resistant Finish: hardened, grinded Central flushing hole Prepared for chip coding Concentricity ≤ 0,005mm Mounted on 3R-Macro 3R-651, 7E-S EROWA versions ...
Collet chucks for collets ER/ESX DIN 6499 / ISO 15488 Concentricity from the taper to the holding part < 0,005 Base-body balanced G 2,5 - 20.000 r.p.m. or U < 1 gmm Special executions ...
... cylindrical shanks in collets DIN 6499/ISO 15488 (ER/ESX) Acceptance Morse taper shank with draw-in thread DIN 228-A tang to modify the holder into execution DIN 228-B on request Concentricity and repeatability outside ...
FAHRION
The product can be applied for end mills, drill bits, drill reamers, taps, and can clamp any straight cutters and tools. *Custom-Built products are available on request. BA2CT40023070A Type:CAT40ᵡER16-2.76 L:2.76 D:1.102 D1:2.5 ...
CHUMPOWER MACHINERY CORP
The Milling chuck can be applied for heavy-duty & higher accuracy cutting. It is designed with inner rolling needles inside. This design can reduce the friction resistance when tightening and in the wear of parts. The ...
CHUMPOWER MACHINERY CORP
The Milling chuck can be applied for heavy-duty & higher accuracy cutting. It is designed with inner rolling needles inside. This design can reduce the friction resistance when tightening and in the wear of parts. The ...
CHUMPOWER MACHINERY CORP
The Duo-Lock collets are perfectly suited for clamping Duo-Lock tools in all established ER collet chucks, driven units and spindles with ER interface. Useable for Duo-Lock milling ...
BT+40 / ER REGO PLUS Colletholders BIG-PLUS SYSTEM licensed by BIG Daishowa Hi-Q® clamping nut included Guarantees highest clamping force and best balancing BT+40 / PG powRgrip® REGO PLUS Colletholders BIG-PLUS SYSTEM ...
HSK-E For high speed cutting (HSC) For automatic tool change Without any drive keys for absolute symmetry
NTs original 4 Points adjustment system for easy, accurate and speedy runout adjustment Suitable for large diameter reaming. Reduce runout to 0-2 microns in under 60 seconds! ~Available in BT, CAT, HSK, AHO & UTS shank types ~Other ...
NT Tool
IMS
IMS
IMS
Rotational speed: 20,000 rpm
■ Suitable for high-speed and high précision cutting; ■ Balanced: G2.5; ■ Runout (X3D): < 0.003 mm.
Ningbo Derek Tools Co., Ltd
Rotational speed: 25,000 rpm
■ For high-speed and high précision cutting; ■ Balanced: G2.5; ■ Runout (X3D): £0.003 mm; ■ No interference due to slim design.
Ningbo Derek Tools Co., Ltd
Clamping range: 75 mm - 200 mm
Rotational speed: 15,000 rpm
HSK-A-ER collet tool holder | ER collet tool holder | milling holder | milling arbor Features: ● Adapter standard: HSK DIN69893-1; ● With ER collet (DIN6499): ER16, ER20, ER25, ER32, ...
Ningbo Derek Tools Co., Ltd
... 50 .. .. Drill chuck arbors •003 54 12 .. .. Reducing adapters •003 54 54 .. .. Modular extensions and reducers •003 57 57 .. .. Front contact extensions and reducers for screw in-tools •004 54 06 .. .. Collet ...
LAIP
Body Material: Steel Mounting Type: Plain Back - Front Mounting Precision Class: Standard Accuracy Chuck Through Hole: NO Unit Of Measure: EA
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining