KROHNE in-line flow meters

Volumetric flow rate: 0.2 m³/h - 212 m³/h
Process temperature: -20 °C - 60 °C
Process pressure: 0 bar - 16 bar

... of the EE741 flow meter is optimised for easy installation and maintenance. Once the gauge mounting block is installed in the pipeline, the transmitter can be installed and removed without any pipework. ...

The DLM is a compact in-line measurement system for the continuous recording of bulk solid streams using non-impact force measurement. The material stream is “gently” deflected via an in-line ...

Process pressure: 2 MPa

... and unity assumption of phase fractions. From these fractions and the total mass flow rate from the venturi meter, inline pressure and temperature measurements, the flow ...

Process temperature: 0 °C - 49 °C

... provides the most accurate measurement. Teledyne Isco 730 Bubbler Flow Modules use an internal air compressor to force a metered amount of air through a bubble line submerged in the flow ...

... Coriolis mass flow sensors with up to +/-0.10% mass flow accuracy and +/0.0005 g/cc density accuracy for liquids and slurries or +/-0.25% mass flow accuracy for gases. The integrated ...

Volumetric flow rate: 0 l/min - 420 l/min
Process temperature: 0 °C - 90 °C
Process pressure: 0 bar - 420 bar

High accuracy turbine flow meters with built-in loading valve and thermistor, for use with hydraulic fluids. Flows up to 400 lpm (100 US gpm). For use with oils, fuels, phosphate-esters Bi-directional ...

Process temperature: 0 °C - 50 °C
Process pressure: 0.2 bar - 11 bar
Precision: 1, 2, 3 %

... Sensor The MEMS semiconductor chip is the centerpiece of the thermal mass flow meter. Analog-digital conversion takes place in the sensor Totalizer In addition to the actual flow, ...

Mass flow rate: 325 kg/h
Volumetric flow rate: 325 l/h
Process temperature: -60 °C - 200 °C

... 0325 Coriolis meter is a combination Density meter and Mass Flow Meter with a maximum mass flow rate of 325 kg/hr (12 lb/min) or 49 bbl/day, and a nominal ...

Volumetric flow rate: 0.3 us gal/min - 30 us gal/min
Process pressure: 500 psi - 1,500 psi
Precision: 2 %

The PI series has the following characteristis and/or options: 10:1 turn down ratio Less sensitive to viscosity change Mechanical pointer and scale readout Optimized for circulating lubricants with viscosities between ...

Process temperature: -35 °C - 140 °C
Process pressure: 16 bar - 40 bar
Precision: 0.3 %

Application Sewage treatment Printing and dyeing Paper making Chemical industry Electricity, Pharmaceutical, Metallurgy Benefits Accuracy: 0.3%, 0.5% Infrared touch button RS485, 4-20mA output, frequency output Double-layer ...

Process temperature: 0 °C - 40 °C
Process pressure: 0 bar - 1.96 bar

The FX Series gravity flow detectors employ a precision differential pressure transducer to detect liquid level variations in a measuring cylinder. The detectors are capable of measuring instantaneous and cumulative fuel ...

Volumetric flow rate: 0 l/min - 500 l/min
Process temperature: 0 °C - 50 °C
Process pressure: 0 bar - 10 bar

Thermal mass flow meter based on high precision MEMS technology (CMOS sensor). Pressure and temperature insensitive according to the CTA constant temperature principle. Also insensitive to pressure ...

Volumetric flow rate: 10 l/min - 200 l/min
Process temperature: 20 °C - 110 °C
Process pressure: 5,075 psi

... pressure. This product also accepts reverse flow (without flow metering). The SMD on the other hand can and must not be subjected to reverse flow. Designed for installation in straight ...

Volumetric flow rate: 0 l/min - 10 l/min

... stand-alone mass flow meter from Axetrist. It is housed on an enclosure that delivers protection from hazards brought by environmental and electrical factors. It is a suitable alternative to standard ...

Precision: 0.35, 0.5 %

MagneW PLUS+ electromagnetic flowmeters are designed to measure every sort of liquid, including water, chemicals, slurries, and corrosive liquids. The standard model has a mirror-smooth PFA liner for excellent adhesion ...

... Thermal Mass Flow Controller is one of its class. It is very specifically designed for sensitive applications where a low pressure drop across the controller is considered critical. Cleanliness of the M330B Low Pressure ...

Volumetric flow rate: 0 us gal/min - 120 us gal/min
Process pressure: 5,000 psi

Ideal flow meter for oils, grease, fuel, solvents, polyurethanes, brake fluid, Skydrol® and other non-abrasive lubricating fluids, such as in the process of measuring cylinder position in engines. Features: ...

Volumetric flow rate: 0 l/min - 15 l/min
Process temperature: -20 °C - 65 °C
Process pressure: 0 bar - 20 bar

... sensor connector. Four flow ranges are available from 2 ml/min to 15 litres per minute, accuracy is ±1% over the whole flow range. Flowmeters for Process & Control: The Titan Process ...

Volumetric flow rate: 0 m³/h - 1,362.7 m³/h

The CPFM-8800 series is a family of advanced flow meters based on the Coriolis principle fabricated exclusively from PFA (Perfluoroalkoxy) polymeric material. CPFM-8800 flow meters ...

Volumetric flow rate: 2.5 m³/h
Process temperature: 0 °C - 30 °C
Process pressure: 16 bar

... volumetric meters developed within the framework of the MID (Measuring Instruments Directive) and field requirements. The meter is very compact, thus adapting to the most restrictive environments (i.e. ...

... range selection input, counter status output and many more! Excelent noise immunity for reliable process control Optional “Fast Response” model for short-run batch applications Averaging function for pulsating ...

Process temperature: -20 °C - 60 °C
Process pressure: 0.25 bar - 4 bar

... companies for remote copying, monitoring, and control of industrial and commercial gas meter users, and to perform statistical analysis of gas meter gas consumption and meter status. ...

Process temperature: -25 °C - 150 °C

Process pressure: 16 bar
Precision: 0.5 %

... of electromagnetic flowmeter display part flow meter and wireless communication module. The wireless communication module is equipped with IOT network card, that is SIM card. Its ...

... billing in civil, industrial and agricultural sector and for flow measurement in residual water treatment. Converter performance has been developed to meet the need to measure even small flow rates with ...