- Hydraulics - Pneumatics >
- Valve >
- High-pressure check valve >
- THE LEE COMPANY
THE LEE COMPANY high-pressure check valves
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
DN: 65 mm - 600 mm
Pressure: 110 bar - 760 bar
The Edward Tilting Disk Check Valve is a large bore valve designed to close as quickly as possible, minimizing loud, damaging slamming and vibration noises caused by ...
DN: 8 mm - 30 mm
Pressure: 400, 700, 500 bar
Temperature: -40 °C - 80 °C
In the closed state the check valve type RHC has zero leakage. It can be screwed-in and can be integrated into control blocks. The necessary mounting holes are straightforward to make. The check ...
HAWE Hydraulik SE
DN: 5 mm - 14 mm
Pressure: 500, 700 bar
Temperature: -40 °C - 80 °C
Check valves with hydraulic release are a type of check valve. They block one or both hydraulic consumer lines or are used as a hydraulically actuated drain valve ...
HAWE Hydraulik SE
Pressure: 700, 500, 280 bar
Temperature: -40 °C - 80 °C
Flow rate: 15 l/min - 160 l/min
Check valves with hydraulic release are a type of check valve. They block one or both hydraulic consumer lines or are used as a hydraulically actuated drain or circulation ...
HAWE Hydraulik SE
DN: 8, 5.5, 6 mm
Pressure: 400, 280 bar
Temperature: -40 °C - 149 °C
... Every Lee shuttle valve is the smallest in its flow class – often one-third the size of existing shuttle valves with comparable flow rates. Each component offers a low ...
THE LEE COMPANY
DN: 0.125 in - 1 in
Pressure: 0 bar - 551.6 bar
Temperature: -85 °C - 225 °C
... line-up of poppet-style check valves offers exceptionally high flow capacity for their size compared to ball-style valves. In some cases, the poppet-style ...
THE LEE COMPANY
DN: 0.187 in - 1 in
Pressure: 3,000 psi - 8,000 psi
Temperature: 400 °F
... types of miniature check valves are available: Axial Flow Check Valves Side Exit Check Valves Zero ...
THE LEE COMPANY
Pressure: 90 bar
Temperature: -50 °C - 140 °C
The Danfoss NRV and NRVH check valves are optimized for use in liquid, suction and hot gas lines in air conditioning applications to ensure correct flow direction. The NRVH valve ...
DN: 4 mm - 25 mm
Pressure: 350 bar
Temperature: -30 °C - 80 °C
Check valves prevent any flow in one direction. In the opposite direction, free flow with minimal pressure drop is possible. Advantages - High ...
BUCHER Hydraulics
DN: 6 mm - 8 mm
Pressure: 0 bar - 1,000 bar
Temperature: -50 °C - 85 °C
Available in two different nominal sizes, this check valve protects upstream equipment from possible damage caused by back pressure and prevents contamination. Thanks to its compact ...
DN: 2 mm - 16 mm
Pressure: 700 bar
Temperature: -40 °C - 80 °C
... a seal that can be opened and closed repeatably. The valve parts are made from high-strength hardened steel whereby the valve seat is specially processed and the patented ball cup is ...
DN: 3 mm - 6 mm
Pressure: 700 bar
Temperature: -40 °C - 80 °C
... pilot-operated check valves are leak-proof check valves with which the flow direction from B to A is open and the flow direction from ...
DN: 40 mm - 400 mm
Pressure: 10 bar
Temperature: -10 °C - 80 °C
Used for water pumping stations, sewage water, leaded and viscous fluids Low head loss Full bore Self cleaning Silent Technical specifications Face to face dimensions according to EN 558 - series 48
Pressure: 0 bar - 320 bar
Screw-In Valve up to 320 bar Miniature-Non Return Valve as Screw-In Valve from stainless steel for thread M6. – Suitable for high pressure areas – Simple ...
Pressure: 3 bar - 230 bar
Temperature: -30 °C - 80 °C
Flow rate: 14, 380 l/min
The valve is made of high-quality stainless steel and has a metallic seal. Available in different thread designs.
Pressure: 4.2 bar - 350 bar
Temperature: -40 °C - 220 °C
Flow rate: 1 l/min - 90 l/min
Soft sealed non return valve as screw-in valve G1/8 from stainless steel
Pressure: 700 bar
Manually operated check valve. Used to hold load with single or double acting cylinder. Manually opened to allow oil to flow back to oil reserve when cylinder retracts.
Pressure: 0 bar - 1,380 bar
Available in two pressure ratings: 'XC15' Series rated 15,000psi (1,035bar) 'XC20' Series rated 20,000psi(1,380bar) The Alco Valves High Pressure Non ...
DN: 15 mm - 100 mm
Pressure: 40 bar
Temperature: -200, 200, 400, 550 °C
DISCO non-return valve RK 16 for special applications The RK 16 series is suitable for liquid, gas, steam and especially aggressive media. The temperature range extends from -200 °C to 550 °C and the pressure ...
GESTRA AG
Pressure: 0 psi - 10,000 psi
Series HPCV is a High Pressure, One-Piece Body, Zero Leak, Check Valve for High Pressure and Severe Service applications. ...
DN: 0.5 in - 2 in
Pressure: 10 bar
Temperature: 0 °C - 80 °C
... water networks, building PRESSION PFA/PS in bar 80° Drilled boss 1/4", POM (polyacetal) plug CLOSING SYSTEM : double check valve POM(polyacetal) GUIDE : POM (polyacetal) / SEAL : NBR (nitrile) or EPDM lip-ring
DN: 0.5 in
Pressure: 10 bar
Temperature: 0 °C - 80 °C
for drinking water protection, clear liquids, water, gaz PRESSURE PFA/PS in bar θ 80° Drilled boss 1/4, POM (polyacetal) plug CLOSING SYSTEM : double check valve POM (polyacetal) GUIDE ...
DN: 8 mm - 50 mm
Pressure: 100 bar - 400 bar
Temperature: 0 °C - 100 °C
high pressure fluids, water, hydrocarbons, gas, general industrial applications... PRESSURE PFA/PS in bar θ 100° CASING : high pressure check ...
Pressure: 420 bar
Temperature: -54 °C - 204 °C
Flow rate: 160 l/min
HCV10-P1 allows flow from ① to ②, and blocks flow in the opposite direction. The cartridge has a fully guided poppet which is spring-biased closed until sufficient is applied at pressure ...
Hydrabase
Pressure: 350 bar
Temperature: -54 °C - 204 °C
Flow rate: 12 l/min
A screw-in, cartridge-style shuttle valve, for use in blocking circuits where a priority of flow/direction is given to a higher pressure circuit. Flow: See performance chart Internal leakage: 0.25 ...
Hydrabase
DN: 0.75 in
Pressure: 250 bar
Temperature: -54 °C - 204 °C
A screw-in, cartridge-style shuttle valve, for use in blocking circuits where a priority of flow/direction is given to a higher pressure circuit. LS04-P0 allows flow from the higher ...
Hydrabase
DN: 65 mm - 150 mm
Pressure: 160 bar - 400 bar
Temperature: -10 °C - 550 °C
high-pressure lift check valve – design of the body is straight sealing – check valve disc – sealing surface is welded by hard facing ...
ARAKO spol. s r.o
DN: 10 mm - 65 mm
Pressure: 63 bar - 500 bar
Temperature: -196 °C - 600 °C
... TRD 201 on request Medium - water, steam, gas, oil, petroleum products, non-aggressive and aggressive substances Material - 1.0460, 1.5415, 1.7335, 1.7383, 1.4571 Connection - weld ends, flanged ...
ARAKO spol. s r.o
DN: 10 mm - 65 mm
Pressure: 63 bar - 630 bar
Temperature: -196 °C - 600 °C
... 12266-1; part 2 Design options: – without oil and grease – with spring – delivery on request according to TRD 201 Material - water, steam, non-aggressive substances Medium - 1.0460, 1.5415, 1.7335, ...
ARAKO spol. s r.o
DN: 6 in
Pressure: 16 bar - 420 bar
Temperature: -29 °C - 400 °C
High-Pressure Swing Check Valve Supplier: High-Pressure Swing Type Check Valves, ASTM A216 WCB, API 6D, BS 1868, 6 ...
DN: 0.5 in - 4 in
Temperature: -20 °C - 232 °C
... Ball check C) Swing check D)Lift check E)Wafer check Investment forging Working pressure: 150lb-2500lb WOG Materials: Forged steel ,Forged ...
DN: 1.813 in - 7.063 in
Pressure: 3,000 psi - 20,000 psi
Temperature: 121 °C
... designs and manufactures various types of API Spec 6A valves suitable for the demanding environments of onshore and offshore drilling and production, including large-bore completions pressure ...
DN: 15, 20, 25 mm
Pressure: 0.3 bar
Temperature: -30 °C - 105 °C
... costs. The spring-loaded check valve requires a minimum 0.34 bar (5 psi) pressure drop to overcome the spring force and lift the valve seat, allowing the check ...
DN: 16 mm - 100 mm
Pressure: 0 bar - 1,000 bar
Flow rate: 20,000 l/min
... Towler legacy, the VC line of high-pressure check valves are built to take on difficult operations and keep working. The line includes standard check ...
DN: 40 mm - 500 mm
Pressure: 16, 25 bar
Temperature: 80 °C
The Model 80N Check Valve is a non-slam, lift type, non return valve that opens to allow flow in the required direction and smoothly closes drip tight ...
DN: 50 mm - 200 mm
Pressure: 10, 16 bar
Resilient-seated non-return valve with sinking ball and free flow passage for minimum friction loss. Especially suitable for use in polluted media as the shape of the valve prevents the ...
DN: 15 mm - 50 mm
Spring loaded, globe style lift check valve ASME Class 800 may be installed in horizontal and vertical piping applications. 5540 series lift check valves are designed ...
Pentair Valves & Controls
DN: 100 mm
Pressure: 18 MPa
... of the valve body. The muffler check valve can only be installed on horizontal pipelines, preferably on vertical pipelines. In high-pressure small-diameter check ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining