{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Flow: 0 l/min - 50 l/min
Head: 0 m - 19 m
Power: 500 W
The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. • Media examples: Diesel, heating oil, hydraulic oil, ...
Lutz Pumpen GmbH
Flow: 0 l/min - 95 l/min
Head: 0 m - 14 m
Power: 460 W
Pump set - Explosive media -0205-411 The Pump Set is suitable for thin, flammable and highly inflammable liquids. Perfectly suited for withdrawing or transferring explosive media. * Optionally available ...
Lutz Pumpen GmbH
Flow: 0 l/min - 124 l/min
Pressure: 6 bar
Head: 0 m - 35 m
... joint of the pump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.The max. ...
Lutz Pumpen GmbH
Flow: 80 l/min
Head: 12 m
Pre-assembled pump kit to pump petroleum products out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer tube material aluminium, ...
Flow: 110 l/min
... Designed specifically for dispensing petroleum-based fuel Meet UL-79 specification code Compatible with gasoline, diesel fuel, kerosene, aviation fuel, ...
Flow: 284 l/min
... Designed specifically for dispensing petroleum-based fuel Meet UL-79 specification code Compatible with gasoline, diesel fuel, kerosene, aviation fuel, ...
Flow: 284 l/min
... Designed specifically for dispensing petroleum-based fuel Meet UL-79 specification code Compatible with gasoline, diesel fuel, kerosene, aviation fuel, ...
Input diameter: 53 mm
Output diameter: 53 mm
Drum pumps Material: pump housing made of cast iron Seals: NBR Pump tube diameter: 53 mm Suction tube length: 1000 mm; Therefore, suitable for smaller containers and 200 ...
Input diameter: 19 mm
Output diameter: 19 mm
... an easy fixing in drum. APPLICATION: Fire brigade hand pump ATEX compliant, single-acting hand pump that can be used for following media of hazard classes A I-III: Diesel, heating ...
Flow: 480 l/min
Pressure: 8 bar
Fluid temperature: 100 °C
Diaphragm pump in aluminum series AAB-112 with membranes in EPDM, balls and seats in acetal FLUIDSFRESH OIL | WATER | DIESEL FUEL SECTORSAERONAUTIC | AGRICULTURE | AUTOMOTIVE | LUBE ...
RAASM SpA
Flow: 610 l/min
Pressure: 8 bar
Fluid temperature: 100 °C
Diaphragm pump in aluminum series AAB-2 with multi ported inlet/outlet, membranes in EPDM, balls and seats in acetal FLUIDSFRESH OIL | WATER | DIESEL FUEL SECTORSAERONAUTIC | AGRICULTURE ...
RAASM SpA
Flow: 170 l/min
Pressure: 8 bar
Fluid temperature: 65 °C
Diaphragm pump in aluminum and polypropylene series APPB-1 with 1" flanges, membranes in EPDM, balls in acetal and seats in AISI 316 stainless steel FLUIDSWASTE OIL | FRESH OIL | ANTIFREEZE | WINDSHIELD FLUID | WATER ...
RAASM SpA
Flow: 30, 50 l/min
Pressure: 1.5 bar
Power: 300, 310, 80 W
... up to 30 minutes. BP 3000 diesel transfer pump is equipped with a vane motor with a sintered rotor and acetal resin vanes that ensures greater power and precision in the dispensing phase. The By-Pass ...
PIUSI
Flow: 20, 35, 70, 130 l/min
Pressure: 0 bar - 7 bar
Weight: 6.9, 2.5, 3.6 kg
... along with a compact build and feathered flap valves that cut down noise enable it to be the perfect machine for OEMs - original equipment manufacturers. Notwithstanding that, anyone using the normal AODD pumps ...
Flow: 250 l/min
Pressure: 1.5 bar - 8 bar
Head: 8 m
... aluminium pumps for large volume transfer dispensing and evacuating a variety of fluids. These pumps have an aluminium air motor. Typical applications for these pumps are transferring ...
Flow: 54 l/min
Pressure: 1.5 bar - 7 bar
Head: 5 m - 8 m
... o - Stainless Steel diaphragm-shaft. • - Undersized pump to fit in any application or reduced space. • - Lateral fluid inlet and outlet ports avoid leaking directly onto the pump. • - Compact ...
Flow: 35 l/min
Pressure: 30 bar
Height: 495 mm
air operated piston pumps. Double acting air operated medium pressure pumps for dispensing lubricants from mobile units, oil distribution packages and small systems. Pumps ...
Pressure: 25 bar - 250 bar
Fluid temperature: -20 °C - 80 °C
... T3 and T4 Can be used with variable-speed drives Applications Test equipment for fuel regulators and commercial aircraft Test benches for diesel injectors Fuel ...
Flow: 0 m³/h - 3.5 m³/h
Pressure: 0 bar - 5 bar
Fluid temperature: 0 °C - 70 °C
... required, these self priming pumps can achieve suction lifts up to 8 metres on water. Mono’s CB/SB, G, M and CP Range pumps provide an economic answer to many pumping duties. Simple design and construction ...
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -40 °C - 200 °C
KF series gear pumps are external gear pumps that operate according to the positive displacement principle. Here, the fluid is transported from the suction to the discharge end by rotation of the two ...
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -10 °C - 150 °C
... Type KF-F transfer pumps were developed specifically for use with fuels, especially for marine fuels. These need to be critically considered, especially regarding the lubricity. And ...
Flow: 56 l/min
Power: 220 W
EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • with anti-siphon device • 4 m supply hose as standard • additional hose from 6 to 10 m - ...
Eurial
Flow: 40 l/min
EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • built-in protection filter • 4 m supply hose as standard • additional hose from ...
Eurial
Flow: 50 l/min
EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • built-in protection filter • 4 m supply hose as standard • additional hose from 6 to 10 m ...
Eurial
Flow: 57 l/min
Pressure: 10 bar
Suitable for transfer applications of low viscosity fluids, diesel, non aggressive fluids, short distances without reels. Needle valve for regulating pump speed is included. Designed for quiet and reliable ...
Flow: 5, 2.7, 0.9, 2, 1.3 m³/h
Bare semi-rotary manual pumps Descriptive Construction materials Body, cover and lever: cast iron Inner mechanism: brass Waterproofing: graphite braid NBR flange O-ring, Viton® ...
Pompes Japy
Flow: 2.7, 1.3, 2, 0.9 m³/h
Bare semi-rotary manual pumps Descriptive Construction materials Body, cover and lever: cast iron Inner mechanism: brass Waterproofing: nitrile O-ring Seal: nitrile O-ring, ...
Pompes Japy
Flow: 2, 1.3, 2.7, 0.9 m³/h
Bare semi-rotary manual pumps Descriptive Construction materials Body, cover: bronze Inner mechanism: bronze Lever: bronze (brass as an option) Flange: bronze threaded oval ...
Pompes Japy
CEMO
Flow: 70 l/min
... The standard containers are primed and painted. We offer a 10-year warranty against rusting thro Electric pump CUBE 70 MC50 - self-priming - pump flow rate approx. 70 l/min - electronic flow meter ...
CEMO
Pressure: 10 bar
Fluid temperature: 60 °C
Weight: 600, 720 g
A, AD Type Modern and compact oil burners pump, designed to pump fuel from the tank to the burner nozzle, at the required pressure. The A – AD type pump ...
Elettromeccanica Delta S.p.A.
Flow: 0 l/min - 12.7 l/min
Pressure: 0 bar - 0.75 bar
Suitable for diesel, fresh and salt water Quick diesel transfer with no spillage Bait tank aeration, diesel transfer, water transfer. Water Systems to 80 ºC Continuous rating but should ...
RULE INDUSTRIES
Flow: 85 l/min
Head: 19 m
Power: 500 W
... W motor with A 5 M cable and plug •Suitable for dispensing diesel, heating oil, hydraulic oil, machine oil, engine oil, etc •Pump interior in aluminium •Ready-to-use kit, including a pump, ...
Flow: 23 l/min
... Features Model No.: 18680 Series •The pump head may be mounted at 90° increments on the motor to allow mounting asneeded. •Meets USCG 183.410 & ISO8846 Marine (Ignition Protection) Diesel Transfer ...
Flow: 0.1 l/min - 0.5 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
Flow: 38, 34, 31 l/min
Weight: 3.6, 3.2 kg
... machinery, tractors, excavators, caterpillar, trucks, etc.; the pumps are not suitable for other media and therefore not for oils, gasoline or water. Protank 25, non-self-priming pumps for ...
Flow: 0 us gal/min - 3,000 us gal/min
Pressure: 0 bar - 415 bar
Head: 0'00" ft - 1000'00"
... Canned Motor Pumps are ideal for the following typical plant applications: NUCLEAR Reactor Water Clean-Up (RWCU) Fuel pool Heavy water transfer/collection Main coolant pump Blow ...
Flow: 12 m³/h - 900 m³/h
Pressure: 4 bar - 16 bar
Fluid temperature: 280 °C
Leistritz screw pumps in the L2 range are twin-screw, single-volute, self-priming positive displacement pumps for the low-pressure range. They are used to pump slightly aggressive, slightly ...
Leistritz Pumpen GmbH
Flow: 3.4 m³/h - 113.6 m³/h
Pressure: 13.8, 10.3 bar
Fluid temperature: 260 °C
Take your pump performance to the next level with Blackmer E Series Magnetic Drive Gear Pumps. Innovative, durable and environmentally friendly, E Series Magnetic Drive Gear Pumps have ...
Blackmer
Flow: 0 l/min - 1.6 l/min
Pressure: 10 bar - 200 bar
Fluid temperature: -30 °C - 130 °C
The HPP 200 is a very compact high-pressure pump that is particularly suitable for pressurization when pumping low-viscosity liquids. The basic version of the pump is designed for a continuous ...
Please specify:
Help us improve:
remaining