MAGTROL compression load cells

Rated force: 58.8 N - 588.4 N
Rated load: 6 kg - 60 kg

Features - Calibrated for 4 corner loads - IP65, IP67 - Extremely durable structure built to withstand excessive loads and impacts

Rated force: 0.5 tf - 5 tf

... steel housing ideal for using in the food/chemical industry Rocking absorption type Designed for tanks and hoppers Compression typed

Rated force: 10 tf - 30 tf
Rated load: 10,000 kg - 30,000 kg

... sealed stainless steel construction protection from water, moisture and corrosion(IP68)* Advanced load design for tanks, hoppers and truck scales Compression type

Rated load: 5 kg - 4,400 kg

... accuracy your application requires, you will find a suitable load cell. Fully approved Global approvals such as OIML, NTEP, ATEX, FM are provided as standard; thus the load cells ...

Rated load: 220 kg - 4,400 kg

The SLB215 Beam Load Cell is equipped with a threaded load-introduction hole.This makes the load cell very easy to integrate into new or existing weighing ...

Rated load: 7.5 t - 22.5 t

... parameters for predictive diagnostics. The SLC611D load cell is the optimal choice for any form of multi-load-cell scale when accuracy and reliability are key. Connectors ...

Rated load: 0.11 lb - 10,000 lb

Honeywell miniature load cells are designed to fit into systems with limited space or tight clearances. The Model 31 series are Honeywell's highest accuracy, rugged, miniature load cells ...

Honeywell miniature load cells are designed to fit into systems with limited space or tight clearances. Model 53 bonded, foil strain gauge transducers are designed for cost efficient production and testing ...

Honeywell’s X-Y force sensor is constructed of two strain gauge bridges mounted at 90° and isolated by a flexure system. The complete, two-component system, including flexures, is machined from one specially-prepared ...

This equipment finds suitable association with suspended containers and Big Bags to act as an efficient and favorable load cell. It is made up of quality stainless steal and is sealed in a safe and a ...

The compact SIWAREX WL270 CP-S SA compression load cell is designed to offer rated loads of 10t, 20t, 30t and 50t. The load cel is extensively used ...

The SIWAREX WL-270 CP-S SB is a life cell model designed for applications involving truck scales and high-load container scales. In accordance with OIML R60 for class C3 accuracy, this SIWAREX unit is ...

Rated load: 500 kg - 75,000 kg

... of the PR 6201 load cell NEW: Output signal of 2 mV/V NEW: additional load levels 60 t and 75 t NEW: Accuracy class (C6) from 3 t NEW: even higher corrosion resistance All accessories ...

Rated load: 500 kg - 520,000 kg

Compression load cell from 500 kg to 520 t. They provide absolute precision for container cars and dosing systems. Made of stainless steel, they are highly resistant and also insensitive ...

Rated load: 500 kg - 10,000 kg

The load cell PR 6212 is a state-of-the-art product. This corrosion resistant load cell has a compact design and also features high heat resistance. Its long product ...

Rated force: 50, 100, 200, 300 kN

... including measurement data The KMC100 force transducers are easy-to-install load cells (called pancakes or compression discs) with IP66 protection ...

Rated force: 0 N - 300,000 N

... The KMC130 force transducers are load cells (called pancakes or compression discs) with a large contact surface for better distribution ...

Rated force: 0 N - 300,000 N

Load cell - pancake KMC180 Load cell up to 300 kN with large contact surface and force transmission via through hole in Ø180 x 53 mm housing Measuring ...

Rated force: 0 kN - 250 kN

The Xforce Load Cells are manufactured by Zwick Roell. This product is used in tensile, compression and flexure tests, and for cyclic tests with zero crossing. In making these load ...

Rated force: 100 N - 250,000 N

A range of 'Smart' S-beam shaped loadcells for measuring tension and compression. Various models to measure from 0 - 100 N through to 0 - 100 kN. Accuracy ± 0.25% of full scale.

Rated force: 100 N - 25,000 N

A range of 'Smart' sensors for compression measurement only. Available in miniature and sub-miniature sizes for use where space is very limited. Compressive load is applied to the top of the sensor's ...

Rated load: 5 kg - 40 kg

... Characteristics The precision cell type PC22 is a single Point load-cell of aluminum with an effective moist protection. The fields of applications lie in the section of sales and table ...

Rated load: 10 kg - 500 kg

... shear-beam cell type SB8 is completely tightly welded made from stainless steel. The cell is specified for industry applications like plate form-, table bridges, small container and tank weighbridges. The ...

Rated load: 7.5 kg - 100,000 kg

... The high power load-cell series RC3 is completely tightly welded made from stainless steel. The cell is specified for industry applications like tanks, silos and weighbridges for heavy ...

Rated force: 0 N - 5,000 N

... and development sector. The ultra-miniature compression load cell model 8416 is a flat, circular disc, the bottom of which is sealed with a cover. The load application ...

Rated force: 0 N - 5,000 N

... dimensions and sturdy construction, these miniature compression load cells made of stainless steel can be used in a wide range of industrial applications and in laboratories. ...

Rated force: 0 N - 20,000 N

... and dynamic forces. The load cell is also designed for applications that provide only little space due to its compact design. These properties, together with the sensors dust protection, make the measuring ...

Rated force: 600 kN - 2,700 kN

Product Description HRL Series load cells consist of a high quality stainless steel. This compact load cell is designed specifically for heavy duty ...

Rated force: 0.5 N - 20 N

Product Description The Magtrol MBB-01 Miniature Force Transducers are designed for the measurement of very small positive and negative charges. Entirely made of aluminum, the MBB-01 combines lightness ...

Rated force: 300, 400 kN
Length: 300 mm

DESCRIPTION The Clamping Force Transducer SK-01 from MAGTROL is based on strain gauge technology. It is ideal for the control of ropes, brake clamps and similar devices. It measures the clamping force, ...

Rated force: 10 N - 20,000 N

... concerns like mentioned-below… - I need to do force measurement, but have no idea how to do it. - How should I get the load cell built in to my equipment? - Which amplifier should I choose? - ...

Rated force: 500 N - 20,000 N

Specifications -It is specialized for compression. -It ranges widely in capacity from 500N to 20kN. -It offers high accuracy +/- 0.5%F.S． Feature First, the load cell is designed ...

Rated force: 1,000 N

LMT load cell (Wide temperature range type) Features LMT load cell can be used in temperatures between -40 and +130 degree Celcius. For example, you can utilize ...

Rated load: 250 kg - 100,000 kg

The compression load cells mod. CO are low profile transducers that are mainly used for the construction of weighing and dosing systems in silos, tanks, hoppers etc.

Rated load: 30,000 kg - 500,000 kg

The compression load cells model CT are mainly used in material testing machines.

Rated load: 500 kg - 100,000 kg

Universal load cells mod. TA are high precision cells and for this reason they are mainly used in laboratory machine.

Rated force: 50,000 N

Button sensor for compressive loads of up to 10,000 lb. Compact and rugged, the R02 is ideal for heavy duty applications with space constraints. Features and specifications •Member of the Plug & Test™ ...

These load cells are compatible with the LS Series test machines, the TA1 texture analyzer and the FT1 friction tester. These load cells are S-Beam designed with anti-rotation ...

Rated force: 2.5 N - 50,000 N

... bridge strain gauged load cells compatible with the DFS-R-ND Series digital force gauge. The SLC Series are full bridge strain gauged load cells complete ...

Full bridge strain gauged load cells compatible with the obsolete TCD digital force testers. The TLC Series are full bridge strain gauged load cells complete with ...

Rated force: 10, 1, 2, 5 kN

The electrical force transducers of the model series TesT 302 are often used when cramped spaces and high standards occur at the same time. These sensors, which are made of stainless steel, are available ...

Rated force: 500 N - 20,000 N

The miniature force transducers of the model series TesT 305 are used almost everywhere, where existent space capacities provide no other opportunity. Due to their compact dimensions these sensors have ...

Rated force: 2 kN - 500 kN

... measurements in rough environments. The transducers, which are made of stainless steel, are easy to install. Their convex compression piece provides a correct force transmission in order to achieve excellent measurement ...