MAYR emergency brakes
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Torque: 15,000 Nm - 11,545,000 Nm
... compensation for brake pads, brake position sensors, warning sensors for worn brake pads, automatic or manual brake ventilation and brake pads made from ...
VULKAN Marine
Torque: 60,000 Nm - 12,450,000 Nm
... compensation for brake pads, brake position sensors, warning sensors for worn brake pads, automatic or manual brake ventilation and brake pads made from ...
VULKAN Marine
Hydraulic disc brake as operating, parking and emergency brake VULKAN hydraulic brakes are available as positive brakes (hydraulically actuated, spring ...
VULKAN Marine
Torque: 0.23 Nm - 9 Nm
Rotational speed: 4,500 rpm - 10,500 rpm
... overexcitation and power reduction. The ROBA®-servostop® Cobot is a closed-circuit, electromagnetic safety brake. When the brake is applied, a rotor disc with friction lining pads is ...
Chr. Mayr GmbH + Co. KG
Torque: 1.5 Nm - 100 Nm
Rotational speed: 3,000 rpm - 20,000 rpm
... A-bearing side and the B-bearing side of servomotors. The ROBA®-servostop® is a closed-circuit, electromagnetic safety brake. When the brake is closed, the rotor is held between the armature disk ...
Chr. Mayr GmbH + Co. KG
Torque: 0.31 Nm - 11.5 Nm
Rotational speed: 4,500 rpm - 21,000 rpm
... spring-applied safety brake for servomotors ✓ Slim design ✓ High power density ✓ Low energy consumption ✓ Simple assembly Slim brake for installation both in the A-bearing side and in the B-bearing ...
Chr. Mayr GmbH + Co. KG
Torque: 1.2 Nm - 330 Nm
Rotational speed: 1,200 rpm - 3,000 rpm
Power: 700 W - 12,600 W
Combiflex pneumatic brakes, since 1974, have been representing the benchmark for the converting industry and most of all for corrugated machines. Mounted on the roll stand unwinders, they represent the best solution to ...
Torque: 0 Nm - 571,119 Nm
Power: 0 W - 2,980 W
... WCSB brakes are air-applied, water- and air-cooled, multiple-disc brakes. With greater braking and tensioning control, Eaton Airflex WCSB elements are perfect for drawworks, mooring systems, log yarders ...
Airflex
Agility and efficiency in a modern form New industrial brake series from RINGSPANN sets standards in design and number of switching operations The electromagnetic disc brakes of the RINGSPANN series ...
Torque: 0.06 Nm - 3.2 Nm
Rotational speed: 6,000 rpm
... extremely compact design in combination with a constant torque to the sister model BXW. This performance was achieved by new friction lining and excitation technology. - High reliability - Ultra-thin design - Low ...
Miki Pulley Europe AG
Torque: 5 Nm - 55 Nm
Rotational speed: 3,600, 5,000 rpm
The BXR model is an emergency and holding brake. Its main feature is the slim design, which makes it a perfect solution in confined spaces. The main applications are in robotics and in servo drives. - ...
Miki Pulley Europe AG
Torque: 2 Nm - 22 Nm
Rotational speed: 3,600, 4,000, 5,000 rpm
The BXL model is a compact brake for emergency brake applications. It has the same design and dimensions as the BXH model but due to the friction lining material the ...
Miki Pulley Europe AG
Torque: 0.01 Nm - 240 Nm
Rotational speed: 3,000, 6,000 rpm
Power: 2 W - 50 W
... includes permanent magnet brakes in which the braking force is generated by a permanent magnetic field. The brake thus works in a de-energized condition and fulfill the following functions: Holding, ...
Torque: 0.3 Nm - 2 Nm
Power: 6 W - 15 W
... spring-applied brakes. This brake solution is characterised by a particularly compact construction, and is designed for small loads. The type 08 can be used as a service brake for dynamic ...
KEB Automation KG
Torque: 2.5 Nm - 2,000 Nm
Power: 25 W - 180 W
... current spring-applied brake, and is used in applications with tough ambient conditions around the world. The standard brake conforms to protection class IP66, with hand-release IP65. The brake ...
KEB Automation KG
Torque: 2.5 Nm - 2,000 Nm
Power: 25 W - 180 W
... spring-applied brake. It has been manufactured by KEB for over 50 years and is used throughout the world in a wide range of applications. The brake can be used both as a service brake ...
KEB Automation KG
Braking force: 1.55 kN
The Hilliard MK350 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as conveyors, elevators and cranes. ...
The Hilliard Corporation
Braking force: 3.33 kN
The Hilliard MK750 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as conveyors, elevators and cranes. ...
The Hilliard Corporation
Braking force: 6.22 kN
The Hilliard MK1400 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as theatrical stage lifts, elevators ...
The Hilliard Corporation
Torque: 15,000 Nm - 11,545,000 Nm
... compensation for brake pads, brake position sensors, warning sensors for worn brake pads, automatic or manual brake ventilation and brake pads made from ...
Torque: 1,150 Nm - 622,050 Nm
VULKAN hydraulic brakes are available as positive brakes (hydraulically actuated, spring ventilated) negative brakes (spring-loaded actuation, hydraulically ventilated) and with a spring ...
Torque: 20,000 Nm - 27,920,000 Nm
Pneumatic disc brake as operating, parking and emergency brakes VULKAN pneumatic disc brakes are designed for light and medium heavy fields of application, in particular ...
Torque: 0.15 Nm - 20 Nm
Power: 5 W - 20 W
... off brake (sometimes known as a safety brake or fail-safe brake) is designed so that when the electrical power supply is removed, the brake engages (power-off brake ...
Torque: 3 Nm - 30 Nm
... AND THEIR TASK IN · Emergency stopping, in order to ensure drive safety functions · Immobilizing machine actuators · Minimizing run-on times of drives APPLICATION AREAS · Motor with ...
Braking force: 7,300 N - 70,000 N
... The caliper SH is intended to work mainly as an emergency brake. It allows an easy mounting and maintenance, and insures maximum efficiency in the most severe environmental conditions. This type of ...
STROMAG
Torque: 0.5 Nm - 0.7 Nm
Braking force: 300 N
... application. When 24 VDC is connected, the brake will be deactivated and the motor can turn freely. It is only recommended to use the brake only as a holding brake and not as an emergency ...
Torque: 0 Nm - 1,800 Nm
Handbrakes and emergency brakes with hydraulic control (negative, multi disc in oil) with output shaft, that can be applied to the motor.
SAI Motori Idraulici
Torque: 250 Nm - 1,700 Nm
Braking force: 2,600 N - 9,300 N
Brake Caliper DH 025 FPA Features - Mounting to the machine at right angles to the brake disc - Spring activated - Pneumatically released - Manual or automatic adjustment to counter friction ...
SIAM RINGSPANN
Torque: 400 Nm - 5,450 Nm
Braking force: 4,300 N - 18,500 N
Brake Caliper - Mounting to the machine parallel to the brake disc - Frame size 035 - Spring activated - Pneumatically released - Automatic adjustment to counter friction block wear - Pressure ...
SIAM RINGSPANN
Torque: 620 Nm - 2,000 Nm
Braking force: 11,000 N
Brake Calipers Features - Mounting to the machine parallel to the brake disc (DV version) - Mounting to the machine at right angles to the brake disc (DH version) - Frame size 030 - ...
SIAM RINGSPANN
Torque: 235 Nm - 19,000 Nm
The NBG-TFDS brakes are intended for safety/emergency i.e. spring actuated and hydraulically released. High environment protection grade (IP56) and robust construction make these safety/emergency ...
Torque: 187 Nm - 8,830 Nm
Rotational speed: 475 rpm - 2,000 rpm
The spring-loaded SL brakes are designed for all applications where a fail-safe brake is required. The brake consists of a hydraulic assembly, a plate assembly and a driven hub supplied ...
Torque: 25 Nm - 150 Nm
Rotational speed: 2,000, 2,500, 3,000, 3,500 rpm
Power: 40 W - 90 W
Single-disc, spring-applied electromagnetic brake. Tension 24 V dc – 0 + 15% Used for dry applications. Emergency or parking brake, with very little play in locked position. ...
MWM FRENI-FRIZIONI
Torque: 2.2 Nm - 120 Nm
Rotational speed: 4,500 rpm - 11,000 rpm
Power: 6 W - 48 W
Single-disc, spring-applied electromagnetic brake. Tension 24 V dc – 0 + 15% Used for dry applications. Emergency or parking brake, with very low inertia and play in ...
MWM FRENI-FRIZIONI
Torque: 25 Nm - 150 Nm
Rotational speed: 2,000 rpm - 4,500 rpm
Power: 22 W - 135 W
... type spring-applied coupling. Tension 24 V dc – 0 + 15% Used for oil bath and dry applications. Emergency or parking brake; engaged at a standstill or at very low rpm. The Magnet ...
MWM FRENI-FRIZIONI
Torque: 150 Nm - 7,000 Nm
Braking force: 0 N - 0 N
Rotational speed: 150 rpm - 400 rpm
... activated? The FPC safety brake is activated when the rate of descent exceeds a preset value, generally between 30% and 50% above the rated speed of the application. This device uses centrifugal force to lock the ...
EIDE
Torque: 130, 45, 260 Nm
Rotational speed: 0 rpm - 15,000 rpm
Power: 4,500, 12,000, 24,000 W
... rated speed is 1000, 1500 or 1800 rpm. In the event of motorization or motor brake failure, the EC brake is activated and controls the lowering of the load. Centrifugal brake is mounted ...
EIDE
Torque: 15 Nm - 700 Nm
Rotational speed: 1,400 rpm - 10,000 rpm
Power: 8 W - 70 W
The FAE electromagnetic brake is basically formed by the inductor core, with the coil and friction material incorporated and the induced assembly, composed of the induced disk itself with a spring-membrane, and the induced ...
EIDE
Braking force: 0 N - 1,050 N
... range of use as holding brakes and emergency brakes that are locked by the spring when in a passive state. The release of the brake occurs hydraulically, pneumatically, ...
Braking force: 0 N - 10,400 N
This is a spring applied safety brake with hydraulically ventilated cylinder. The brake is used as an emergency stop and holding brake in heavy duty systems. Actuating ...
Braking force: 31 kN - 50 kN
... hydraulically released brake calliper include cranes, lifting gear and heavy industry. Bild These systems have a wide range of use as holding brakes and emergency brakes ...
... 710 mm Ø 800 mm Features Stronger brake drum rim / outer surface (Standard) In case of emergency braking the brake drum can clearly absorb more energy due to thicker rim Technical ...
Braking force: 50 kN
Depending on contact pressure, coefficient of friction and brake disc diameter The high capacity of these brakes makes them particularly suitable as service- or secondary emergency ...
DELLNER BUBENZER Germany GmbH
Braking force: 400 kN
Depending on contact pressure, coefficient of friction and brake disc diameter The high capacity of the SF-series makes them particularly suitable as secondary emergency brakes on ...
DELLNER BUBENZER Germany GmbH
Braking force: 510 kN
Depending on contact pressure, coefficient of friction and brake disc diameter The high capacity of the SF-series makes them particularly suitable as secondary emergency brakes on ...
DELLNER BUBENZER Germany GmbH
Torque: 0.04 Nm - 1,000 Nm
The Spring-Applied Single-Disc Safety Brake, Electromagnetic Release, manufactured by Chain Tail Co., Ltd., features a safety and absolute control. It has a minimal variation in torque for quick response even in abnormal ...
Torque: 8 Nm - 480 Nm
the Chain Tail Co ABD series of Electromagnetic safety brakes features a double fail safe, using double coils, safe and reliable control, due to steady torque levels for fast control of loads even in abnormal conditions. ...
Torque: 1 Nm - 8 Nm
... applied brake with a very thin profile which is mainly used for robotic and ball screw applications. This brake does not come with a hub so customers have flexibility with integrating the brake ...
jbj Techniques Limited
Torque: 3,700 Nm - 125,000 Nm
... -loaded brake with dry-running friction elements specifically developed for servomotor-driven presses. The brake is normally used as a holding brake for stationary machines, but can also ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining