MAYR spring brakes

Torque: 2 Nm - 1,800 Nm

safety brakes are designed for mounting on the free shaft end. They provide a secure hold and can brake moving masses or loads from moving. In the event of a power failure, in the event of a fault or ...

Torque: 8 Nm - 3,600 Nm

... pulls the armature disk against the spring pressure against the coil carrier and the intermediate disk is pressed against the collar of the spacer bolts by the compression springs. The brake ...

Torque: 931 Nm - 5,144 Nm
Braking force: 1,939 N - 11,182 N

... light The ROBA®-diskstop® brake is an electromagnetic safety brake actuated by quiescent current. In the de-energised state, springs press the armature disk against the brake ...

Torque: 8.5 Nm - 640 Nm
Braking force: 333 N - 6,211 N

... lining, armature disk and diaphragm transmission spring to the flange and shaft. In the de-energised state, the diaphragm transmission spring pulls the armature disk back to the flange. This releases ...

Torque: 100 Nm - 800 Nm

an electromagnetic safety brake actuated by quiescent current. When de-energised, the pressure springs of the ROBA-stop®-S press against the armature disk. The rotor is held between the armature disk ...

Torque: 10 Nm - 365 Nm

stage is an electromagnetically released dual-circuit spring-applied brake for use as a holding brake with occasional emergency braking. In the de-energised state, several compression ...

Torque: 12, 100, 200, 35 Nm

... electromagnetic safety brake actuated by quiescent current. The ROBA®-alphastop® is installed in an existing design between the server motor and the bell housing simply and without modification. When de-energised, ...

Torque: 250 Nm - 4,700 Nm

brake is a quiescent current actuated, electromagnetic safety brake. In the de-energised state, springs press against the armature disks. The rotor is thus held between the armature ...

Torque: 4.8 Nm - 560 Nm

... In the de-energised state, several compression springs press against an armature disk. The armature disk thereby pushes the rotor against the flange. The flange and the armature disk clamp and brake ...

Torque: 250 Nm - 3,400 Nm

are spring-applied, electromagnetic brakes. In the de-energised state, compression springs press against the armature disks. The rotor with the friction linings is thus held between ...