MAYR torque limiters

Torque: 0.3 Nm - 7,150 Nm

... trips) when the load rises above a set value, and friction-type Torque Limiters that slips when the load exceeds the friction force. Unlike shear pins, which break the pin and cut off torque ...

Torque: 5 Nm - 1,500 Nm
Diameter: 1.2 mm - 2.5 mm
Rotational speed: 800 rpm - 4,000 rpm

... high torque surges which can occur due to unforeseen blockages. Function at disengagement/synchronous If the set torque is exceeded (overload condition), the clutch disengages and a residual torque ...

Torque: 2 Nm - 12,000 Nm
Rotational speed: 500 rpm - 8,500 rpm

... frictionally engaged safety clutch. If the set torque is exceeded (overload case), the drive element slips and thus limits the torque. The friction power parameters (slipping speed, slipping time and ...

Torque: 5 Nm - 3,000 Nm
Rotational speed: 3,000 rpm - 12,000 rpm

... principle. The clutch protects the drive train against impermissibly high torque surges which can occur due to unforeseen blockages. Function on disengagement If the set torque is exceeded (overload ...

Torque: 0.06 Nm - 85 Nm
Diameter: 35 mm - 260 mm

... particle torque limiters Easy to integrate into any type of system, achieving fast response time, very reproducible slipping torque level, smooth and silent operation, low wear and ...

Torque: 100 Nm - 286,000 Nm

Gear Type Couplings Gear Type Wedgegard Couplings can be supplied bored and keyed to customer requirements. All Couplings manufactured to AGMA standards. Designs to suit special drive requirements are available. Maximum Speed 500 ...

Torque: 15 Nm - 335 Nm
Diameter: 7 mm - 45 mm
Rotational speed: 1,500 rpm

... – therefore maintenance-free • Adjustment of limit torque setting according to the number of active springs – not through modification of spring pressure Function • When the preset limit torque ...

Torque: 2.5 Nm - 2,500 Nm
Diameter: 7 mm - 70 mm
Rotational speed: 700 rpm - 3,300 rpm

... connecting flange for maximum load capacity • Calibrated micro adjustment of torque setting possible, even post-installation • Cost effective Function • When the preset limit torque has been reached ...

Torque: 5 Nm - 740 Nm
Diameter: 10 mm - 60 mm
Rotational speed: 2,000, 1,200, 3,000, 2,500, 4,000 rpm

... onto shaft with integral cone clamping element • Calibrated micro adjustment of torque setting possible, even post-installation Function • When the preset limit torque has been reached the SIKUMAT® ...

Torque: 2.5 Nm - 2,000 Nm
Diameter: 7 mm - 70 mm
Rotational speed: 700 rpm - 3,300 rpm

Overload Clutches > Positive Torque Limiters Ratcheting, with balls Advantages - Very high response accuracy through the ball principle - Integrated fixed bearing - ...

Torque: 5 Nm - 1,800 Nm
Diameter: 7 mm - 70 mm
Rotational speed: 150 rpm - 1,000 rpm

Overload Clutches > Positive Torque Limiters Synchronous Ratcheting, with single rollers Advantages - Synchronous re-engagement after 360° - Integral fixed bearing - ...

Torque: 2 Nm - 6,000 Nm
Diameter: 8 mm - 115 mm
Rotational speed: 1,120 rpm - 13,000 rpm

Overload Clutches > Friction Torque Limiters RIMOSTAT® Torque Limiters Advantages - Particularly suitable in applications with ...

Torque: 0.06 Nm - 6 Nm

... particle torque limiters Easy to integrate into any type of system, achieving fast response time, very reproducible slipping torque level, smooth and silent operation, low wear and ...

Torque: 3 Nm - 10,000 Nm
Diameter: 52.3 mm - 469.9 mm
Rotational speed: 80 rpm - 1,800 rpm

... to shaft connection. Torque Limiter combined with Roller Chain Flexible Coupling The Torque Limiter Coupling combines overload protection with ability to connect ...

Torque: 2.5 Nm - 8,200 Nm
Rotational speed: 50 rpm - 4,000 rpm

... , available in 6 sizes for bores up to 65mm, with torque range of 2.5 to 1800Nm, provide optimum speed and torque capabilities; and the Mini type, available in 4 sizes for bores up to 45mm, with torque ...

Torque: 0.85 Nm - 740 Nm
Diameter: 8 mm - 60 mm
Rotational speed: 1,200 rpm - 4,000 rpm

Zero backlash Overload Clutches and Couplings, series CZ and CN, available in 8 different basic types, and 12 basic sizes, for shaft diameters from 8mm to 60mm; providing Overload Protection for Torque ...

... by using air pressure to regulate torque. Air pressure puts force on the balls placed inside the pockets in the clutch, and provides the means for torque transmission. By adjusting the air pressure, the ...

Torque: 45,833 Nm
Diameter: 60.3 mm - 686 mm
Rotational speed: 700 rpm - 1,800 rpm

Torque limiters and couplings are designed to slip during a torque overload, while still transmitting the adjusted torque. They provide dependable solutions to the problems ...

Torque: 3 Nm - 90 Nm
Rotational speed: 0 rpm - 60 rpm

The DMB is a factory set torque limiter. The torque value can’t be adjusted later and thus protects against handling errors during installation and usage. - Fixed torque ...

Torque: 0.2 Nm - 200 Nm
Rotational speed: 500, 1,800 rpm

The Torque Tender is a simple version of a safety system that limits the power transmission between two shafts or a shaft and a pulley. Due to the special construction even, slight offsets of shafts can be compensated. ...

Torque: 0.2 Nm - 20 Nm
Rotational speed: 500, 1,800 rpm

The Torque Tender 03 is a simple version of a safety system that limits the power transmission between a shaft and a pulley. Fixed set torque For shaft - pulley connection

Torque: 0.5 Nm - 9,000 Nm
Diameter: 5 mm - 130 mm

... with radial clamping hub both sides • simple installation • compensations of sfaft misalignements - low restoring forces • Torque range: 0,5 - 3.000 Nm • Shaft diameter: D1= 5 - 90 mm / D2= 5 - 100 mm

Torque: 10 Nm - 3,200 Nm

Series SKR-K with cone clamping bush Series SKR-N with keyway connection robust slide bearing for high bearing forces and best concentricity compact attachment and optimum pane integration

The SITL model is manufactured by Italplant, and is a safety input torque limiter that is integrated with a high capacity spring release component. The unit is ideal for use in operations where it is ...

The Safety Output Torque Limiter (SOTL/ATT) is a safety device manufactured by Italplant for placement on the motor's input shaft. The limiter makes use of the Italplant-patented SOTL ...

The External Torque Limiter LCI from Italplant is a security system that is placed at the external part of the rotary table. The system discharges the load of the disc when a particular amount of torque ...

Rotational speed: 50 rpm - 400 rpm

The torque limiter is a mechanical element that shuts off force transmitted when it exceeds the set torque. Torque limiters are used in applications ...

Torque: 0.2 Nm - 4 Nm
Rotational speed: 160 rpm - 600 rpm

Two-Stage Torque Limiter is developed for the actuator of anautomated hatchback door of an automotive. It requires two functions,damping and safety protection. These two mechanisms are packaged in one ...

Torque: 0.009 Nm - 0.049 Nm
Diameter: 6 mm
Rotational speed: 50 rpm - 400 rpm

The R-type torque limiter is a mechanical element that shuts off force transmitted when it exceeds the set torque. Torque limiters are used in applications ...

Torque: 2 Nm - 600 Nm
Diameter: 15 mm - 62 mm

torque-limiting Multidisc coupling. For oil bath applications; for dry applications, please, see “BF” model Useful for connection between a shaft and a pulley or crown wheel to be fastened to the housing ...

Torque: 2 Nm - 600 Nm

Torque-limiting Multidisc coupling. For dry applications Useful for connection between a shaft and a pulley or crown wheel to be fixed to the cup housing (10) The calibration is adjusted by the threaded ...

Torque: 2 Nm - 600 Nm

COUPLING GS/SM 02.02.•••.01 Torque-limiting Multidisc coupling. For oil bath applications; for dry application see “BF” model Useful for connection between a shaft and a pulley or crown wheel to be fixed to the ...

Torque: 20 Nm - 3,150 Nm

The LCS torque limiter is a completely mechanical device that serves to immediately cut the transmission of a torque when the torque demand exceeds the set value of the ...

Torque: 1 Nm - 400 Nm
Diameter: 16 mm - 80 mm
Rotational speed: 3,000 rpm - 13,000 rpm

The LPC torque limiter is a mechanism designed to absorb overloads in any type of machine, therefore they are mechanical “fuses”. When the regulated torque is exceeded, there is a slip ...

Torque: 10 Nm - 600 Nm
Diameter: 25 mm - 85 mm
Rotational speed: 1,000, 1,250, 1,500 rpm

... the limiter allows us to recover the mechanical synchronism for which it is built, normally it is 360º, other configurations, on request. The LPB torque limiter can be used for ...

Torque: 20 Nm - 400 Nm
Diameter: 32 mm - 50 mm
Rotational speed: 1,250, 1,500 rpm

... microswitch can be installed in the LPPSS torque limiter which, upon detecting loss of synchronism, stops the entire transmission by means of an electrical signal. Once the problem is detected and ...

Torque: 0.3 Nm - 111 Nm

This torque limiter that is manufactured in China is capable of protecting the mechanical equipment, or its work, from damage caused by mechanical overload. The unit ranges on torque ...

Torque: 0.1 Nm - 2,800 Nm
Diameter: 4 mm - 100 mm

... specifications. Tolerance: Tolerance between hub and shaft 0.01 - 0.05 mm. Material: High strength, hardened steel Properties of Torque Limiter model SK1: absolutely backlash-free and torsionally ...

Torque: 0.1 Nm - 2,800 Nm
Diameter: 4 mm - 100 mm

... between hub and shaft 0.01 – 0.05 mm. Material: High-strength, hardened steel Properties of Torque Limiter model SKP: absolutely backlash-free and torsionally rigid compact, simple design ...

Torque: 5 Nm - 1,800 Nm
Diameter: 12 mm - 72 mm

... between hub an shaft 0.01 - 0.05 mm. Material: torque limiting portion: high-strength, hardened steel clamping hub: up to series 500, aluminium from series 800, steel Properties of Torque ...