- Hydraulics - Pneumatics >
- Valve >
- Stainless steel check valve >
- Mival
Mival stainless steel check valves
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
DN: 0.25, 0.375 in
Pressure: 300 psi
Temperature: 32 °F - 230 °F
Four varieties of check valves are offered by Clippard. Each permits flow in one direction only. All have brightdipped brass bodies that provide inline mounting, Nitrile seals and stainless ...
Pressure: 300 psi
Temperature: 32 °F - 230 °F
The Clippard Pilot-Operated Check Valve works as a standard check valve, but can also be opened with an air pilot signal to allow free flow in the normally checked direction. ...
DN: 0.125 in - 1 in
Pressure: 0 bar - 414 bar
Temperature: -56 °C - 204 °C
... broad choice of end configurations (variety of threads - BSPP and metric). Series 2000 is available with two valve options - Poppet valve or ball valve. This coupling system can be used ...
Parker Hannifin France SAS
DN: 0.125 in - 1 in
Pressure: 0 psi - 3,000 psi
Temperature: 100 °F - 400 °F
Parker's CB Series check and filter check valves are a unique ball check design. These check valves handle uni-directional flow control ...
Parker Hannifin France SAS
DN: 0.125 in - 1 in
Pressure: 0 bar - 414 bar
Temperature: -56 °C - 204 °C
Parker's CO Series check valves are designed for uni-directional flow control of critical fluids and gases in industries such as pharmaceutical,research and microelectronics. Parker’s CO Series Check ...
Parker Hannifin France SAS
DN: 0.25, 0.125 in
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 70 °C
This allow air flow in only one of the two directions. EAN code: - 8056686166792 Quantity per package: - 5 Minimum order quantity: - 5 Unit of measure: - items Thread type - Cylindrical Threaded port - 1/8"
DN: 25 mm - 100 mm
Pressure: 10 bar
Temperature: 140, 135 °C
The RUF Series Check Valve is used in places where a return flow of product in pipelines must be avoided. This check valve is utilized in brewery, dairy, chemical and ...
DN: 25 mm - 100 mm
... flow into the flow direction stops. The valve which only consists of a few parts, is a cost-effective alternative to the DELTA RUF3 valve. Housing, valve, disc, guide, cover are ...
DN: 6 mm - 12 mm
Pressure: 10 bar
Temperature: -5 °C - 60 °C
... regulator • - Control valve • - Function fittings • - Venting opération • - Pressure regulator • - Pneumatic system Technical Characteristics: • - Fluids: Compressed Air • - Materials: nickel-plated brass, stainless ...
Parker Legris
DN: 0.125 in - 1 in
Pressure: 0.5 bar - 12 bar
Temperature: -10 °C - 120 °C
Controllable valves for compressed air control For regulating the compressed air supply to consumers
Pressure: 100,000 Pa - 700,000 Pa
Temperature: -5 °C - 60 °C
Flow rate: 3 l/min
Pilot Check Valve with State Detection • According to ISO 13849. • Solid state auto switch PNP: D-M9. • Lead wire connection : 500 mm and M8 connector. • Operating pressure range: ...
DN: 5.5 mm - 8 mm
Pressure: 0 bar - 280 bar
Temperature: -40 °C - 149 °C
... threads, O-rings, or sealants. The valve features all stainless steel construction with a high quality metal seat providing low leakage, repeatable cracking pressure, ...
THE LEE COMPANY
DN: 2.5 mm - 8 mm
Pressure: 0 bar - 6 bar
Temperature: 0 °C - 149 °C
... fittings, and soft tubing, our press-in style check valves will match our insert check valves for ease of installation. Their unique barbed design will ensure retention ...
THE LEE COMPANY
DN: 8, 5.5, 6 mm
Pressure: 400, 280 bar
Temperature: -40 °C - 149 °C
Standard Lee shuttle valves are available in three models: a 5.5 mm, 2.1 GPM* model; an 8.0 mm, 4.8 GPM* version; and our new 400 Bar valve. The new 400 Bar Shuttle Valve is just 6 mm ...
THE LEE COMPANY
DN: 50 mm - 350 mm
Pressure: 40 bar
Split disc check valve Like the DCV, the Spirax Sarco SDCV provides a compactinstallation. The design of the SDCV resolves the size andpressure drop limitations of other check valve ...
Spirax Sarco
DN: 3, 4, 5, 6 mm
Pressure: 0 bar - 250 bar
Temperature: -40 °C - 200 °C
WEH® Check Valve TVR200-S1 stainless steel, 0 - 250 bar - Product family The WEH® TVR200 Check valves made of stainless ...
WEH GmbH Verbindungstechnik
DN: 10 mm - 20 mm
Pressure: 0 bar - 250 bar
Temperature: -20 °C - 200 °C
WEH® Check Valve TVR2-S1 stainless steel - Product family Thanks to their extreme leak tightness, the WEH® TVR2 check valves from ...
WEH GmbH Verbindungstechnik
DN: 3, 4 mm
Pressure: 0 bar - 100 bar
Temperature: -40 °C - 200 °C
... TVR300 Miniature check valves made of stainless steel are ideal for applications with liquid and gaseous media up to max. 100 bar. The possible applications are just ...
WEH GmbH Verbindungstechnik
DN: 2.5 in
Pressure: 0 bar - 20 bar
Temperature: -20 °C - 70 °C
... – using complex valve assembly with low opening pressures (ca. 5 mbar) stainless steel filter (100 μm) in the gas inlet protects the non-return valve against dirt ...
WITT-Gasetechnik
DN: 0.5 in
Pressure: 16 bar
Temperature: -20 °C - 70 °C
... – using complex valve assembly with low opening pressures (ca. 4 mbar) stainless steel filter (100 μm) in the gas inlet protects the non-return valve against dirt ...
WITT-Gasetechnik
DN: 0.5 in
Pressure: 0 bar - 0 bar
Temperature: 70 °C
... minimal noise emission WITT non-return valves for reliable protection against dangerous reverse gas flow. Flow-optimised valve system causes very low pressure drop at minimal noise emission. Every ...
WITT-Gasetechnik
DN: 0.062, 0.125 in
Pressure: 0 psi - 75 psi
Check valves will prevent flow in one direction and facilitate flow in the opposite direction. Check valves are sometimes called non-return valves. Normally ...
DN: 0.5 in - 3 in
Pressure: 600 psi
* Investment casting ASTM-A351 CF8M, Screwed Cap, Swing Type Disc, Intégral Seat. Body - CF8M Cap - CF8M Disc - CF8M Connecting Rod - CF8M Disc Nut - SUS316 Pin - SUS304 Boit Washer - Teflon Gasket - Teflon Boit - SUS304
DN: 0.88 mm - 1.01 mm
Pressure: 0 psi - 250 psi
... for details. Approximate Weight: 6-8g in brass and 303 stainless. Weight will vary slightly, depending on configuration. Note: Check valve elements are designed for regular use. ...
Beswick Engineering Co, Inc.
DN: 0.88 mm - 3.2 mm
Pressure: 0 psi - 250 psi
... for details. Approximate Weight: 2g in brass and 303 stainless. Weight will vary slightly, depending on configuration. Note: Check valve elements are designed for regular use. ...
Beswick Engineering Co, Inc.
DN: 2, 0.125 mm
Pressure: 0 psi - 100 psi
... repeatability, and leak-tight operation. Approximate Weight: 9g in stainless steel (303 & 316) Note: Check valve elements are designed for regular use. If the valve ...
Beswick Engineering Co, Inc.
DN: 2.7 mm - 14.3 mm
Pressure: 1,550 bar
Temperature: -20 °C - 350 °C
The MAXIMATOR ball check valves can be used even with high temperatures. Their shut off liquids and gases up to a maximum pressure of 1,500 bar. All valves have collars and glands. The ...
Maximator GmbH
Pressure: 4,500 bar
Temperature: -20 °C - 200 °C
... O-Ring check valves are capable of shutting off directional flows of gases and fluids. They are incorporated with a leakage-resistant sealing feature. The O-Ring and Ball Check Valves ...
Maximator GmbH
Pressure: 4,500 bar
Temperature: -50 °C - 350 °C
These Maximator Ball check valves can shut off directional flows of fluids and gases with maximum working pressure of 4,500 bar and in - 50°C to +350°C operating thermal range. These valves ...
Maximator GmbH
DN: 6, 12, 10 mm
Pressure: 206 bar
Temperature: -20 °C - 190 °C
NO RETURN VALVE FOR TWIN FERRULE FITTING - STAINLESS STEEL 316 Inox 316
BENE INOX
DN: 8 mm - 100 mm
Pressure: 63 bar
Temperature: 0 °C - 180 °C
SPRING LOADED 3 PIECES CHECK VALVE - FEMALE / FEMALE BSP OR NPT - STAINLESS STEEL 316
BENE INOX
DN: 25 mm - 104 mm
Pressure: 10 bar
Temperature: -20 °C - 130 °C
CHECK VALVE PLAIN ENDS - EPDM GASKETS - STAINLESS STEEL 316L Inox 316L
BENE INOX
DN: 0.25 in - 2 in
Pressure: 0 bar - 15.9 bar
Temperature: -18 °C - 93 °C
... high-quality Check Valves are specially manufactured in the U.S.A. by ANVER, for ANVER lifting systems. Versatile, one-way Check Valves work with nearly all of ANVER’s ...
DN: 38.1, 50.8, 63.5, 76.2 mm
Valves / Check Valves Ball Check Valves have a 316L stainless steel body with a curved offset ball trap. FEATURES Product ...
DN: 25.4 mm - 101.6 mm
Pressure: 1 psi - 5.9 psi
Valves / Check Valves Stops or check reverse flow in a pipeline. FEATURES W45 Series In the absence of forward flow pressure, the electropolished spring returns ...
DN: 0.375, 0.125, 0.5, 0.25 in
Pressure: 0.3 bar - 25 bar
Temperature: -10 °C - 120 °C
FEMALE-FEMALE NON RETURN VALVE The 66.000 serie is made of stainless steel AISI 316L function fittings: flow controls for cylineders, in-line and banjo fittings, unidirectional ...
DN: 4, 5.5, 3.2 mm
Pressure: -0.9 bar - 10 bar
Temperature: -10 °C - 70 °C
... at least 10°C below lowest occurring ambient temperature. Materials Body: Al (anodized), seals: NBR,inner parts: stainless steel and brass Output signal is present if one inlet is pressurized. ...
Pressure: max 40.0 bar
Temperature: -20 °C - 180 °C
Stainless steel AISI 316L non-return valves, are designed for harsh usage conditions. The driven shutter and the spring never compressed completely, guarantee very high intervention frequencies.
DN: 2 in
Temperature: -20 °C - 60 °C
The STAINLESS STEEL ANGLE CHECK VALVE RIDART is designed to prevent the drainage of fuel (loss of prime) in the suction line and permits the product flowing only towards ...
DN: 6 mm - 8 mm
Pressure: 0 bar - 1,000 bar
Temperature: -50 °C - 85 °C
Available in two different nominal sizes, this check valve protects upstream equipment from possible damage caused by back pressure and prevents contamination. Thanks to its compact and space-saving ...
DN: 50 mm - 1,200 mm
Pressure: 16 bar - 420 bar
Axial Flow Check Valve body material: Carbon steel /Stainless steel / Alloy steel /Special ( Monel /Inconel /Hastelly etc.)alloy ...
Athena Engineering S.r.l.
DN: 50 mm - 1,900 mm
Pressure: 16 bar - 420 bar
Dual Plate Type check valve body material: Materials: Carbon steel /Stainless steel / Alloy steel /Special ( Monel /Inconel /Hastelly ...
Athena Engineering S.r.l.
DN: 50 mm - 600 mm
Pressure: 100 bar - 420 bar
Pressure seal Swing type check valve -cast steel body material: Carbon steel /Stainless steel / Alloy steel /Special ...
Athena Engineering S.r.l.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining