NETZSCH vertical mills

Rotational speed: 2,000 rpm - 4,000 rpm

The Cross Beater Mill SK 300 is suitable for coarse and fine size reduction, either in batches or continuously. It can process medium-hard and brittle materials and is easy to operate. With its adjustable speed of ...

Rotational speed: 3,500, 3,000 rpm
Output: 1,500 kg/h
Motor power: 1.5 kW

Hammer mills are used for crushing, pulverizing and deagglomeration of medium-hard, hard, brittle, tough and fibrous samples. The rugged RETSCH Hammer Mill HM 200 accepts large feed sizes up to 100 ...

Rotational speed: 500 rad.min-1 - 4,000 rad.min-1
Motor power: 1.5 kW
Machine width: 565 mm

... time. With its innovative design featuring a removable milling chamber, the SM 50 simplifies cleaning, saving up to 30 % process time. At the same time, the unrivaled powerful benchtop cutting mill with ...

Rotational speed: 6,000 rpm - 24,000 rpm
Output: 15 kg/h

... loss, even in the tenth sample. An added benefit: The FRITSCH P-14 is the only rotor mill on the market that can be converted into a highly efficient cutting mill in just a few simple steps. This is ...

Rotational speed: 800, 1,600 rpm

FRITSCH Planetary Ball Mills – high-performance all-rounder in routine laboratory work The Planetary Mill P-5 premium with 2 grinding stations is the ideal mill for fast wet and dry ...

Rotational speed: 300 rpm - 3,000 rpm
Output: 60 kg/h

... fine tune the comminution process for each sample within a very wide range of applications. The high-speed Universal Cutting Mill P-19 with a torque of up to 30 Nm comminutes dry, soft to medium-hard sample materials ...

... empowers the user to make simple adjustments to achieve the precise product qualities required. Vertical or horizontal mounting position makes the colloid mill ideal for batch, batch-continuous, or in-line ...

Rotational speed: 85 rpm

The Series A Muncher can be packaged with our pumps to provide a highly effective macerating, screening, or pumping system. The reliable Series A Muncher is well proven in its ability to effectively macerate raw sewage, sludge, screenings, ...

With the ability to capture up to 95% of solids at 5- or 9-mm aperture sizes, this innovative solution combines a self-cleaning screen with a high-torque grinder. No manual attendance or cleaning is required, and disposal costs for handling ...

Motor power: 37 kW
Machine length: 1,850 mm
Machine width: 1,126 mm

... TURBO” refiners are as follows: A reduction of energy consumption and lower maintaining costs compared to any other type of mill. Concentration of the wear on small surfaces, which can be easily replaced. A very ...

Motor power: 37 kW
Machine length: 1,850 mm
Machine width: 1,126 mm

... TURBO” refiners are as follows: A reduction of energy consumption and lower maintaining costs compared to any other type of mill. Concentration of the wear on small surfaces, which can be easily replaced. A very ...

Motor power: 75 kW
Machine length: 2,290 mm
Machine width: 1,125 mm

... TURBO” refiners are as follows: A reduction of energy consumption and lower maintaining costs compared to any other type of mill. Concentration of the wear on small surfaces, which can be easily replaced. A very ...

Rotational speed: 28,000 rpm
Motor power: 160 W
Machine height: 240 mm

Batch mill for 2 different grinding procedures: Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater. This beater can be used for a Mohs hardness up to 6 (incl. with ...

Rotational speed: 400 rpm - 8,000 rpm
Sound pressure: 50 dB
Machine length: 178 mm

Crushing and dissolving of tablets for subsequent analysis: Many standardized test procedures in the pharmaceutical industry, such as the pharmacopoeia tests described in official compendia (United States Pharmacopeia (USP 905), European ...

Rotational speed: 5,000 rpm - 25,000 rpm
Motor power: 100 W
Machine length: 300 mm

... reliably grind very small quantities of samples with most laboratory bench mills. The Tube Mill control Agriculture Solution package, consisting of the Tube Mill control batch mill ...

The medium flows steadily through the RotaCut. Foreign matter (stones, metal parts, etc.) is separated out based on its size or weight and can be easily disposed of later via a cleaning port. All floating and suspended substances within ...

Machine weight: 120, 195 kg

Grinding systems protect your system. With the universally applicable M-Ovas® cutting plate macerator, you can prevent possible damage to your pump caused by impurities. The individually adjustable cutting plate prevents ...

Machine weight: 170, 260, 320 kg

The N.Mac® channel twin shaft grinder crushes large and solid particles in liquid media and impresses with its innovative FSIP® concept (Full Service in Place). It is ideal for a wide range of applications, from wastewater treatment to ...

Machine weight: 220, 780, 360 kg

Protect your system from impurities: The N.Mac® inline twin shaft grinder crushes large and solid particles in liquid media and impresses with its FSIP® concept (Full Service in Place). It is ideal for various applications, from wastewater ...

... for homogenization of dry products to a specified particle size, reduction of oversized particles to the desired size and milling of agglomerates back to the initial size. A set of shims to adjust the clearance between ...

... control cabinet • High Cr-alloyed rolls • Cooling rollers • Potential equalisation against static charge • Aspiration connection • Connection for inert gas supply • Magnetic separator via feeder Product examples: Roller ...

Rotational speed: max 30000.0 rpm

... the grinding tools can be changed as well. The Universal Mill can be used as a pin mill, blast mill or wing beater mill. • Finenesses from d99 30 µm to d99 800 ...

... available with the following machines, which can be easily exchanged: • Fluidized Bed Jet Mill CGS 10 • High-Density Bed Mill ConJet®® 10 • Classifier Mill CSM 50 • Ultra-Fine Classifier ...

... any of the following mills or classifiers: • Fluidized Bed Jet Mill CGS 10 • High-Density Bed Jet Mill ConJet®® 10 • Classifier Mill CSM 50 • Fine Impact Mill ...

Output: 50 kg/h - 800 kg/h
Motor power: 55, 90, 22 kW
Machine weight: 1,800, 2,500, 900 kg

... design • Wide range of accessories • Easy temperature control The disc pulverizers of the PM series are available with disc diameter from 300 to 800 mm. These pulverizers are high speed, precision ...

Machine length: 1,000 mm
Machine width: 834 mm
Machine height: 1,712 mm

Machine length: 1,120 mm
Machine width: 816 mm
Machine height: 1,914 mm

Output: 6 t/h - 350 t/h
Motor power: 75 kW - 3,300 kW
Machine length: 2,400 mm - 7,200 mm

WTM intelligent vertical mill is dedicated to the high-efficiency dissociation of minerals, providing users with energy-saving, consumption-reducing, quality-enhancing and efficiency-enhancing solutions, ...

Final grain size: 6 µm - 150 µm
Output: 10 kg/h - 12,000 kg/h
Motor power: 8 kW - 132 kW

... Grinding in a complete closed system, no dust, low noise, clean and environmentally friendly. Fluidized Bed Opposed Air Jet Mill: After the compressed air is filtered and dried, it is sprayed into the grinding chamber ...

Final grain size: 2 µm - 16 µm
Output: 400 kg/h - 10,000 kg/h

... • High energy utilization rate, low operating cost, grinding particle size range D50: 0.5-10μm. • The revolution of dry milling technology, the milled particle size can reach sub-micron or nanometer level, which greatly ...

Output: 600 kg/h - 5,000 kg/h
Motor power: 237, 152 kW

Large output and high production efficiency Large output, more than twice the production efficiency of Raymond mills and jet mills, good product fineness indicators, easy installation of complete sets ...

Rotational speed: 450 rpm
Motor power: 4 kW

The MACSA 300 Overhung Disintegrator Hammer Mill has been designed to satisfy the needs of Laboratories, Research Institutions and Industries requiring size reduction on a semi-production scale. The Mill ...

Variously known as a Barrel Mill, a Swing-Mill, a Ring Mill or a Stone and Disc Mill, this highly efficient grinding machine comprises a steel vessel containing a solid ...

Output: 200 kg/h - 1,200 kg/h
Motor power: 30 kW - 90 kW

Design The ZM series pulverizer (pulveriser) is a extremely high out put unit can be supplied with automatic temperature control. The material to be pulverized is vibro feeder fed into fixed and high speed rotating pulverizer ...

Final grain size: 6 mm - 8 mm
Output: 300 kg/h - 1,000 kg/h
Motor power: 6 kW

... , allows to obtain the best performance with only 6,55Kw. The strength of the materials, the effectiveness of the grinding system and the particular grids which is fitted to allow the grinder CASTORO also produce ...

The machine called grinder mod. CASTORO has been designed to grind the cutting or processing scraps of expanded polystyrene, of various densities and sizes. The innovative low-noise crushing system is a novelty in the sector, making ...

Rotational speed: 670 rpm
Motor power: 132 kW

The ENERPAT V Series Vertical Shredder (Hammer Mill) is a powerful tool for efficient scrap metal recycling. It crushes waste metal into 50-80 mm particles, which easily pass through the gap between the ...

Output: 100 kg/h - 900 kg/h
Motor power: 37 kW - 110 kW
Machine length: 3,500 mm - 5,000 mm

... multifunctional PCB pulverizer machine is a series ot disc type plastic mill. PCB pulverizer machine is used for the third stage crush. It has the characteristics ot nigh production and ...

Output: 30 kg/h - 800 kg/h
Motor power: 15 kW - 75 kW
Machine length: 3,700 mm - 4,300 mm

The disc grinding pulverizer machine of the PNMF series are available with disc diameter from 300 to 800 mm. These plastic pulverizer machines are high speed, precision grinders for the processing of ...

Final grain size: 3 mm - 8 mm
Output: 30 kg/h - 1,000 kg/h
Motor power: 45 kW - 110 kW

The WANROOETECH's new design WR series pulverizing system which are introduced from US technology has its compact design, is the perfect fit for the large production user, it use dual grinding disc, one disc as primary disc, another are ...

Output: 150 kg/h - 20,000 kg/h

The POITTEMILL pendulum roller mill is a vertical mill that works by compressing the material bed. The pendulums mounted on a star wheel are driven by a vertical shaft. ...

Output: 1 kg/h - 15,000 kg/h

The PAS integrated classifier mill is designed to treat a wide variety of products obtaining a particle size of 99% down to 10µm. The PAS is equipped with a grinding plate and integrated classifier that are driven ...

The BRF dual-rotor universal mill is an evolution of the FNG universal mill. The BRF’s design is based on FORPLEX impact crushers (such as the FNG or FPX models) but is engineered with two oppositely ...

Output: 500 kg/h - 5,000 kg/h
Motor power: 7.5 kW - 55 kW
Machine weight: 1,250 kg - 3,300 kg

What is the primary function of the TK Series Chip Crusher in manufacturing facilities? The TK Series Chip Crusher is primarily used in manufacturing facilities to efficiently reduce the size of metal chips and turnings, enhancing ...

Gensco offers mini mobile specialty attachments for concrete crushing, scrap and demolition processing. Designed with small hydraulic machines in mind. Suitible for concrete crushing, scrap and demolition applications, cutting and lifting ...

Output: 60 kg/h - 110 kg/h

• Machine made entirely of AISI 304 stainless steel • Robust construction to increase processing precision and for improved long-term durability • Cutting rollers adjustable up to ± 10 mm gap • Cutting roller speed adjustable via inverter • ...

The MTS Crusher Mill of PIMECSA, is a hammer mill that rotates at high speed within a chamber with sieve and fulfill the functions of crusher / lump breaker and sieve. Its inclined position ...

Mac 100 granulator shredder For shredding electrical cables (copper and aluminium), plastic and wood. The MAC100 can be used as a pre-shredder. It has 21 flying blades and 4 fixed blades. Supplied with a pre-shredding grid and stainless ...

Final grain size: 100 µm - 100 µm
Output: 60,000 kg/h - 480,000 kg/h
Motor power: 2,200, 4,000, 3,000 W

The Waste water Grinder from United Tech Machinery is a high torque, low rotating speed and double shaft grinder under water. It is designed to pulverizing all kinds of solid waste ( clothing, plastic, trash, wood, aluminum can, glass ...

Final grain size: 100 µm
Output: 1,100,000 kg/h - 6,700,000 kg/h
Motor power: 11,000, 7,500, 5,500 W

The Waste water Grinder from United Tech Machinery is a high torque, low rotating speed and double shaft grinder under water. It is designed to pulverizing all kinds of solid waste ( clothing, plastic, trash, wood, aluminum can, glass ...

Final grain size: 1,000 µm
Output: 400,000 kg/h - 1,000,000 kg/h
Motor power: 4,000, 5,500 W

The Waste water Grinder from United Tech Machinery is a high torque, low rotating speed and double shaft grinder under water. It is designed to pulverizing all kinds of solid waste ( clothing, plastic, trash, wood, aluminum can, glass ...